Podcasting since 2005! Listen to Latest SolderSmoke

Thursday, January 30, 2014

BITX 20/40 Update #7: Cabinetry and Socketry


With the 20 Meter Oscillation Exorcism behind me, I have decided to take a break from electronics and do bit of woodwork.   I took the walnut (I think) box that I bought via Amazon and cut out a big piece of the wood on the front.  That's where the rectangular piece of copper clad board will go -- it will be the front panel, supporting the AF gain control, the bandswitch, the main tuning control, and the mic jack.   A similar copper clad board will be on the back, this one supporting the antenna jack,  speaker jack and 12V input jack (with space for a linear amplifier T/R control jack).  (George Dobbs, G3RJV, calls this the "socketry.")

That beautiful copper sheeting will line the inside of the box.

I found the soft wood on this box to be very easy to work with.  The little saw pictured above made the woodwork easy.

I have boiled linseed oil and clear polyurethane for the finish. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

1 comment:

  1. It looks like your carefully honed reputation for ugly construction will be compromised with this enclosure. Please keep the photos of progress coming. I can feel a new trend in enclosures emerging.

    72, Al - va3iaw

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column