Podcasting since 2005! Listen to Latest SolderSmoke

Monday, April 27, 2015

SDR Dongle Modified for HF. Watch it work on 40 meters (VIDEO)



With SPRAT 162 by my side, armed with an FT37-43 trifilar wound transformer, I popped open the RTL-SDR dongle.  I had hopes of being able to solder two tiny wires to the unused input pins (3 and 4) but I quickly realized that I was NOT going to be able to do that -- they are far too small for me to work on.  So I did what Ken Marshall G4IIB did:  I took out the SMT caps going to pins 1 and 2 and soldered two small wires there.  This will limit this dongle to HF only -- if I want VHF/UHF I'll just spend another $13 dollars!  You can see the results in the video above.

 
I used the yellow stuff to hold the wires in place.  It was later removed.

Tony Fishpool did a neater job.  See his work here:
https://dl.dropboxusercontent.com/u/1987387/Even_more_on_using_the_RTL2832U_Dongle.pdf


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

6 comments:

  1. If you don't want to wind your own transformer, you can find one in an H16105DF 10/100Mbps Ethernet decoupling transformer. Every ham has a junk box right? Pictures in this post ( http://eliasoenal.com/2012/11/07/rtl2832u-transformer-mod/ )

    ReplyDelete
    Replies
    1. Fascinating Michael. I hooked out a gigabit ethernet card from the office junkbox and the filter is a midcom 7093-37. The datasheet is online and it is similar to the filter referenced in your article. That lead me to an article with more info:
      http://yu3ma.net/wp/?p=370
      There is some advice about adding a capacitor to the USB 5v and clamping filters around the USB cable to reduce noise. I get quite a bit from my monitor.
      I'm wondering now whether the HF performance of my dongle is not as good as it could be because I didn't remove those capacitors in order to retain VHF?

      Delete
  2. Bill, the secret is a big very magnifying glass and a very small soldering iron. :-)
    de Tony G4WIF

    ReplyDelete
    Replies
    1. Tony: I really thought I could do it. But no. But I am glad the mod worked. Thanks for the articles in SPRAT. Bill

      Delete
  3. There is even more dongle madness in the next Sprat :-)

    ReplyDelete
  4. Tapping an IF should be your next next mission Bill. Welcome to RF TV :)

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column