Podcasting since 2005! Listen to Latest SolderSmoke

Tuesday, August 18, 2015

Another BITX DIGI-TIA -- AC9JQ's (video)



Wow, Dean's BITX with Termination Insensitive Amplifiers (3 of them) sounds really nice. And this is with a homebrew ladder filter (see below).

 
I also like the way Dean makes his enclosures -- he uses scrap aluminum and 1/2" angle.  This might cause me to abandon the wooden cigar boxes.
  


Dean will now add the driver and PA stages and plans on following Pete's suggestion by making this a 20/40 rig. 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

3 comments:

  1. Bill,
    After several weeks of work on the enclosure, I would not recommend building an enclosure this way. Takes too long.

    ReplyDelete
  2. I absolutely know Deans' radio is Digital --it has a nice square hole on the front panel. Beautiful craftsmanship and it sounds Awesome!

    Pete N6QW

    ReplyDelete
  3. Awesome,
    Thinking of building one, specially after this crystal ladder, Can u give me some details on impedance transformation? Is there any easy way to find the impedance of a crystal ladder ? Also is it ok if I replace the SBL-1 mixer with the DBM made up of Diodes and trifilar inductor like one in BITX20?

    Thanks
    de 9N1NE

    ReplyDelete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column