Listen to Latest SolderSmoke Podcast

Thursday, August 31, 2017

VE1LEB's Ergonomic BITX Enclosure (in Juliano Blue)


Wow, Michael's amazingly cool BITX enclosure looks like you could use it to ask Scottie to beam you up. 
Put an end to those freakish contortions -- 3D print yourself an Ergonomic BITX box! Very FB Michael. Thanks. 

Hi Bill and Pete:

I thought you’d be interested to see my ergonomic enclosure for the BITX40. While operating homebrewed regen radios, I noticed that my hands/arms/shoulders were becoming uncomfortable after a while. After thinking about this for a few days, I realized that the dials on the front of these small radios were forcing my hands into freakish contortions—and having both hands on the dials at all times while tuning made matters worster faster! So I did some homework and determined that our arms and hands most naturally hold things toward each other, as though they are holding a small cylinder by the ends. But the conventional “dials-and-speaker-facing-front” radio case forces us to twist our hands up and outwards from our bodies to twist things. See my blog post http://blog.generaleccentric.net/?p=2009 for illustrations of this problem.

My enclosure design for the BITX40 re-orients the volume and tuning knobs toward the sides of the radio, making their operation much more natural—and pleasant. Although it’s not retro, it does have an unconventional appearance and should fit in quite naturally with all the other homebrewed solutions featured on SolderSmoke. 

You can visit my post at http://blog.generaleccentric.net/?p=2082; the box is available for download and printing at Thingiverse: https://www.thingiverse.com/thing:2508147

By the way, I also have a 3D printable mic for the BITX40: https://www.thingiverse.com/thing:2500483

73, Michael VE1LEB

5 comments:

  1. very nice cabinet for BITX40
    From my side 10/10 points

    ReplyDelete
  2. Looks VERY retro. Reminds me of this:

    https://www.smecc.org/remco_caravelle.htm

    ReplyDelete
    Replies
    1. I was thinking the same thing, Mike! (I've got a Caravelle on display in my shack.)

      Michael - incredible job of melding form and function into a very appealing design - Bravo!

      73 - Steve N8NM

      Delete
    2. off to the printer...looks like a
      LONG TIME to print !!!!

      Delete

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column