Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Even when describing something as simple and basic as snow, Mr. Carlson is electronically awesome. This video made me realize that in the event of an EMP, his will probably be the only lab to survive. The SolderSmoke Daily News took up the topic of snow static back in 2011. Be sure to read the comments, especially the one from KC7IT about the QUARTER INCH ARCS that woke him up in the dorm at MIT. Check it out: https://soldersmoke.blogspot.com/2011/10/snow-static.html#comment-form I've got to get one of Mr. Carlson's 2020 calendars!
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
(2) BC-669
-
I have 2 complete but un-restored BC-669's that need to find new homes.
Both are complete but it should be assumed these will need restoration.
I can bri...
The POTA Babe Goes Back to Florida – Day 1
-
In pursuit of my 60 new-to-me park activations, I headed back to Florida
for six days the first week of April. The weather forecast looked promising
– high...
April 17, 2024. Something you can build.
-
Check N2CQR's Solder Smoke Daily News posting yesterday for a really super
neat Direct Conversion Receiver project (DCR) from Geoff, N6GWB. One of the ...
New Podcast from the Wireless Innovation Forum
-
Many thanks to SWLing Post contributor, Dennis Dura, who shares the
following news item from EIN Presswire: Wireless Innovation Forum Launches
“Beyond the ...
An Inline RF Step Attenuator for QRPp Work
-
I don’t need to explain the attraction of low power operation; if you’re
reading this, the chances are that you are already a convert. I’ve been
operating ...
Using an external clock with the RX-888 (Mk2)
-
*The RX-888 (Mk2) and external clocking*
*Figure 1:*
The RX-888 with external clock input *(right)*
The enable/disable switch is barely
visible behind the...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...
No comments:
Post a Comment