Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts with label Soviet Union. Show all posts
Showing posts with label Soviet Union. Show all posts

Friday, March 24, 2023

Homebrew AM from Cuba

Jose CO6EC sent us more information about homebrew rigs built in Cuba.  The transmitter above is a thing of beauty.   I am really glad that Jose has held on to it.  Thanks Jose! 

Jose CO6EC today

Jose CO6EC writes: 

This is another work from that time:  an AM and CW transmitter of about 100W of power, with an on-board modulator.  It was taken with some modifications from a Handbook from the 50s.  Here goes:  it was built with what we had on hand at that time, it still exists, I keep it as a relic of those years.

It used combined Soviet and American tubes in the RF sections:  Soviet 6P9 and (2) 6146.   The modulator used Soviet 12AX7, 12AUT and (2) 6P7. The 6P9 works as a crystal oscillator, and in  case of using an external VFO it works as an amplifier and doubler or tripler to obtain outputs in the  160,80,40,20,15 and 10 Meter bands. 

The VFO was also taken from a 1949 Handbook if I remember correctly, but I don't have any literature on that, as you can see in the photo it has 5 5u4c rectifier valves, VR150 voltage stabilizer, 6v6 output, another 6v6 as a separator and a 6 )I(4 (60I94?) Soviet, in the oscillator.  The stability they achieved in those years is incredible,  I could communicate with stations that were on LSB and if I didn't tell them that I was on AM they didn't notice. 

  As a receiver I used an old   Soviet AM and CW receiver, used by the Aviation HF stations   of the 40s, which no longer exists hihihihihi

I'll tell you how I tuned all that good ftuff:  First I put the receiver  in CW to beat the signal of the stations in SSB.  After hearing them clearly, I removed the oscillator of the receiver  and connected only the VFO of the Transmitter, and beat the signal with that of the receiver until I heard the other station  clearly, then I put the transmitter to work and was ready to communicate.

There were many communications made with that station, even internationally on phone  and CW. 

Today everything is easier because with transceivers it is not necessary to go through all that work, but it is always good that those who did all this work know how radio was built and made.

 73   Jose CO6EC

Obviously the transmitter

The two pictures above must be the VFO.  It looks like the VFO in the 1947 ARRL Handbook. 

I wonder what handbook this was?  Spanish language. 



Thursday, March 23, 2023

More Cuban Homebrew from the 80's and 90's -- A 160 Meter AM (Controlled Carrier) TX with Soviet 6P23s

 
160 Meter Transmitter

Jose CO6EC writes: 

I will be sending you some work of homebrew from the 80's and 90's when practically everything was manufactured by Cuban radio amateurs

The photos are of a Modulated Amplitude TX for the 160 Meter Band, about 25W of which several were made.  The final tube  was modulated in many cases by a 6DQ6, 2E26 or other similar ones that were very abundant at that time. 

This one in particular is  made with valves  6BH6 for the VFO, 6CL6 for the amplifier step and 6P23 Soviets in the final part, the modulator was made up of a 12Ax7 microphone preamplifier and a 6BM8 that came out through the cathode to the screen grid of the 6P23, in this way the carrier was controlled by modulation what we called  Carrier Control as there was no voltage on the grid at the ends there was practically no carrier  in the air which gave the impression of transmitting in SSB. hihihihihihi

For those who did not have a communications receiver, a conventional radio was adapted to receive that band, which in many cases was a VEF-206 of Soviet construction, to which an oscillator was adapted to beat the signal and get exactly on frequency. This was very popular here in the late 80's and early 90's. 




Thanks Jose.  We look forward to learning more about Cuban homebrew. The way in which radio amateurs got on the air with gear that they made themselves using the limited parts available to them is really interesting and admirable. 73  Bill 

Tuesday, February 9, 2021

Meet Your New Soviet Neighbor -- With Hallicrafters

 
Thanks to Jeff Murray for alerting us to this.  It is obviously from World War II.   If the new neighbors had S-38s, well, that might help explain why things didn't go so well.  

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column