Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Thanks to Thomas K4SWL of the SWLing Post for alerting us to this gem. Listen to Sarah Johnston's program describing the origins and early years of broadcast radio in New Zealand.
This wonderful recording and article reminded me of a bit of ham radio history involving New Zealand, and someone who was involved who had a surname similar to mine. The ARRL book "200 Meters and Down" by Clinton DeSoto reports on page 91 that on May 22, 1924, radio amateurs for the first time made a contact between New Zealand and South America. Carlos Braggio operated rCB8 in Buenos Aires. In New Zealand, J.H. O'Meara was at the key in Gisborne.
Writing of the early amateurs, DeSoto wrote (on page 92):
"Why did they do it? None but one of them can know, and only he would know the feeling of driving ambition, the relentless call of work to be done, the gnawing discontent that hungers for accomplishment; it would be hard to put into words. The strange thing is that there were folk, everywhere on earth it seemed, who had that urge."
"The gnawing discontent..." That is what Jean Shepherd had when he couldn't get his Heising Modulator to work properly. We've all been there.
The last line in the quote from DeSoto's book speaks to one of the major themes of this blog and of the SolderSmoke podcast: the way in which people all around the world got interested in radio in much the same way. So many of us, all around the world, often at age 13 or 14, suddenly got interested in radio. We all had (and have!) "The Knack." This is really very nice -- it is something that we have in common, something that pulls us together.
This is a really wonderful video. It might seem slow to those accustomed to faster-paced YouTube videos, but the information content is very high -- it contains a lot of pictures I hadn't seen before and audio of Howard Armstrong.
I never knew that the name of the radio company Zenith was derived from the early callsign "9ZN."
As a Northern Virginian, I like the reference to NAA Arlington.
I used to live near Yonkers, N.Y. I remember Warburton Ave. What a fine shack young Howard had up in that cupola attic.
The photo of Armstrong's breadboard was very nice. My Mythbuster is in good company.
QRPers will get a kick out of the newspaper headline "New Radio Marvel Revealed!" (They cut the power out from 20kW to 5 watts!)
Thanks again to Dave Bamford W2DAB for sending me the book about Armstrong, "Man of High Fidelity" by Lawrence Lessing.
Finally, I remember talking to Bruce Kelley W2ICE at hamfests. He was a great radio amateur:
This is really fantastic. The screen display is like Google Earth, but all the green dots are local broadcast radio stations. Put your cursor on the dot and listen to that radio station live. And it works very well. If there are several stations in the same town, just zoom in.
In the course of a few minutes this morning I was listening to stations in Guatemala, Costa Rica, Getxo Spain, and Bengaluru India.
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Wanted: Matching speaker for NC-183D
-
Does anyone have a excellent condition 10" version of the matching speaker
for a NC-183D they would like to sell?
If so, please contact me at wd4lur@gmail....
Photos from the Stuart Hamfest 2024
-
Many thanks to SWLing Post contributor, Mike (VE3MKX), who shares the
following photos by Ben (VE3ST) of the Stuart Hamfest 2024 held in Florida:
Photo Gal...
Dale Goes “SOTA-Lite” with the Elecraft KH1
-
Many thanks to Dale (N3HXZ) who shares the following field report:
SOTA-Lite with the KH1 by Dale (N3HXZ) My KH1 Edgewood Package finally
arrived in late F...
Handy breakout board for Raspberry Pi Pico
-
Just picked up a few of these breakout boards. I'm not sure that I like the
screw terminals but it is handy having LEDs on each GPIO pin. I'm really
gettin...
Ugly Construction!
-
Here’s a little project I put together on a whim about 18 months ago. It
was my tribute to the unlicensed (i.e. pirate) beacon cluster around 4096
KHz. The...
Repairing a dead Kenwood TS-850S
-
Recently, a Kenwood TS-850S - a radio from the mid-early 1990s - crossed my
workbench. While I'm not in the "repair business", I *do* fix my own
radios,...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...