I went back to work on the ET-1R, my relay-based version of the single FET transceiver (check the index on the left under Minimalist Radio for more on this). The contest this weekend (was it CQ WW DX?) gave me plenty of signals to tweak the receiver with. I finally got the RX in the right freq range, and I have a nice banset/bandspread arrangement with two variable caps. I attacked the dreaded hand capacity issue via the use of non-conducting attachments to the capacitor shafts (one is the cap from a pen, the other is a piece of wood from a clothes pin).
The slaughter of innocent MPF-102s has ended (some victims are visible on top of the SPRAT). The culprit was NOT voltage spikes from the relay coil (although that might have contributed). Instead, what was happening was that I had the gate voltage set way too high on the transmit side. Whenever I powered up the rig, it was for an instant in the transmit mode (before the relay kicked in). The high voltage jolt on the gate was enough to kill the FET.
You can see the transmitter tucked in behind the relay. It moves my SWR meter on key down, so I'm confident I can get at least one QSO (perhaps across Rome) with this rig. Then, I intend to retire it. It will probably be a few years before I forget the pain and decide to build another minimalist regen rig.
I went back to work on the ET-1R, my relay-based version of the single FET transceiver (check the index on the left under Minimalist Radio for more on this). The contest this weekend (was it CQ WW DX?) gave me plenty of signals to tweak the receiver with. I finally got the RX in the right freq range, and I have a nice banset/bandspread arrangement with two variable caps. I attacked the dreaded hand capacity issue via the use of non-conducting attachments to the capacitor shafts (one is the cap from a pen, the other is a piece of wood from a clothes pin).
Clayton (who is NOT crazy) has put together a really neat solar-powered QRSS rig with the two wires for the dipole antenna sticking out the ends of the transmitter box. During the testing phase he went the extra mile by first freezing the circuit into a block of ice and then heating it up in an oven. I guess he really wanted a wide range of temperature data! Clayton's web site on the project is very interesting and very well done. Check it out:
Deon, K6WH ZS1ACP has been having a great time with Software Defined Radios and stealth vertical antennas in San Diego. His blog site has this great shot of what the band (was it 40?) looked like at the moment that Field Day ended. Check out Deon's blog:
I was thinking that if you have World Moonbounce Day marked on your calendar, you probably have The Knack.
Lunchtime on Ponza (with Palmarola Island in the background)
We were out on Ponza island this week. Amazing place. Part of the Pontine Island group. Brave Ulysses was an earlier visitor. Roman emperors used it as a summer place. It is only about 33 km from the mainland and you can get there from Anzio in about one hour by fast hydrofoil. We took a small boat over to the beautiful island of Palmarola. I did a bit of shortwave listening. More about this trip in the next SolderSmoke.
Posts
