Podcasting since 2005! Listen to Latest SolderSmoke

Friday, October 28, 2011

Homebrew Jet Engine from Junkbox Parts!



Bob, W8SX (our man in Dayton) sent me this nice video. I really liked the friendly and enthusiastic way in which the builder described his project. I only wish he would have fired it up! Thanks Bob!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Wednesday, October 26, 2011

Azorean Oscillator Re-build

With my JBOT amp ready for installation, it was time to go back and check out the rest of the circuitry on my old Azorean DSB/Direct Conversion 17 meter "Magic Carpet" transceiver. I was surprised to find that the oscillator, well, wouldn't oscillate. The MPF102 that I had in the main oscillator circuit was blown. I suspect voltage spikes from the T/R relay. I installed the required diode across the relay coil. (I seem to blow up a lot of MPF102s. Is it just me, or are these devices really fragile? They are junction FETs, not MOSFETS, so I thought of them as being more robust. But I seem to go through a lot of them.)

After messing around with the oscillator and buffer circuits, the nice clean Manhattan isolation pads that had been there at the start were all messed up, with big piles of solder with the ends of multiple axial leads stuck in there. I decided to start afresh. Out came the little PCB box that housed that housed the oscillator, buffer and amp stages. Off came the walls of the box. (When I built this thing the first time, I didn't realize that I would need an amp to get to the 7 dbm needed to drive the diode ring. I ran out of room on the main board and ended up building the needed amplifier on the back wall of the box!)

So I got to build this little circuit again, ten years and three countries after the original build. It was fun. I like building oscillators. There is that satisfying sense of closure and completion when, at the end of the effort, you turn on your receiver and hear the tone from your creation.

There was also a fun little bit of troubleshooting. After rebuilding the oscillator circuit I noticed that applying power to the "on the wall" amplifier caused the oscillator to shut down. At the buffer, I was seeing RF in and RF out, but the whole thing would shut down when I powered up the next stage. Obviously there wasn't a lot of BUFFERING going on! Sure enough, the MPF102 was bad. I replaced it from my dwindling supply, and all was right with the universe.

Now the amp goes in. But first I will build the low pass filter. I promise.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Steve Jobs (age 12) calls Bill Hewlett (of HP)

"When he was in eighth grade, Steve Jobs decided to build a frequency counter for a school project and needed parts. Someone suggested that he call Bill Hewlett. Finding a William Hewlett in the telephone book, the 12-year-old Jobs called and asked, "Is this the Bill Hewlett of Hewlett-Packard?" "Yes," said Bill. Jobs made his request. Bill spent some time talking to him about his project. Several days later, Jobs went to HP and picked up a bag full of parts that Bill had put together for him."

More HP stories: http://www.hp.com/retiree/history/founders/hewlett/quotes.html

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Tuesday, October 25, 2011

Halloween Sale on SolderSmoke -- The Book

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htm
Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke
Our Book Store: http://astore.amazon.com/contracross-20

Monday, October 24, 2011

Better Link to 1932 Yardley Beers Article

(From the November 2004 issue of QST)

I hear that picture I posted of the 1932 newspaper article was pretty much illegible. Sorry about that. Try this one from the Delaware Valley Radio Association. Scroll down a bit until you see OM Yardley in his front bedroom shack (the one with a window on the world!). On my Firefox browser I was able to click on it and get an easily read-able view.

http://photos1.blogger.com/blogger/2790/1877/1600/Yardley%20Beer%20DVRA1.jpg

Thanks DVRA!

BTW: Did you catch the name of the fellow who taught young Yardley the Morse Code? Atherton Noyes. Such good strong names!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Sunday, October 23, 2011

More on Yardley Beers

Just click on the article and use the zoom feature of your browser to visit the teenage shack of Yardley Beers.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Saturday, October 22, 2011

Homebrew Hero: Yardley Beers

How's that for a beautiful homebrew rig! Prompted by our discussion of distinctive ham radio names, Harv, WA3EIB, sent us a very nice report on Yardley Beers, W0JF. The rig pictured is Yardley's "Jason" 20 meter QRP transceiver. Yardley had named the rig for his cousin. Harv met Yardley at a Colorado hamfest in 1993:

"On the table in front of Yardley was an Aluminum Box fashioned into a QRP radio named, “Jason”, 2 broken and worn head phones from the 1920’s, a few 1980’s QST and, several odd radio parts. My bulb of brilliance was not working that day. I said, “I don’t know what I’m looking for!" Somehow Yardley must have studied my eyes. I had locked my vision onto his very elaborate QRP rig. He paused for a few moments and said, “You into QRP?” By this time I felt more relaxed because he was now on my wavelength. I said, “Why yes, I would rather work with a homebrew radio that the ones with features that no one seems to know what they do!”

Harv bought the Jason (and everything else on Yardley's table) and established a lasting friendship with W0JF.

There is a nice article about OM Yardley's life in the November 2004 issue of QST.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column