Podcasting since 2005! Listen to Latest SolderSmoke

Friday, November 29, 2013

First Pictures of the Far Side of the Moon (1959!)


On October 7, 1959, the Soviets sent an "automatic interplanetary station" to the moon.  This, in itself, was an amazing achievement.  Even more amazing is how they managed -- using 1950s technology -- to photograph the far side of the moon and get the images back to the earth. 

The Soviet document on the Harvard site (below) says that the transmitter put out "a few watts" and used semiconductors.  There appears, however, to have been at least one vacuum tube aboard (the cathode ray tube used to scan the chemically developed photo negatives).  Frequency modulated analog video similar to FAX) was used to send the data.

http://articles.adsabs.harvard.edu//full/1962IAUS...14....7L/0000007.000.html

From Wikipedia:

Luna-3 was the first successful three-axis stabilized spacecraft. During most of the mission, the spacecraft was spin stabilized, but for photography of the Moon, the spacecraft oriented one axis toward the Sun and then a photocell was used to detect the Moon and orient the cameras towards it. Detection of the Moon signaled the camera cover to open and the photography sequence to start automatically. The images alternated between both cameras during the sequence. After photography was complete, the film was moved to an on-board processor where it was developed, fixed, and dried. Commands from the Earth were then given to move the film into a scanner where a spot produced by a cathode ray tube was projected through the film onto a photoelectric multiplier. The spot was scanned across the film and the photomultiplier converted the intensity of the light passing through the film into an electric signal which was transmitted to the Earth (via frequency-modulated analog video, similar to a facsimile). A frame could be scanned with a resolution of 1000 (horizontal) lines and the transmission could be done at a slow-scan television rate at large distances from the Earth and a faster rate at closer ranges.
The camera took 29 pictures over 40 minutes on 7 October 1959, from 03:30 UT to 04:10 UT at distances ranging from 63,500 km to 66,700 km above the surface, covering 70% of the lunar far side. Seventeen (some say twelve) of these frames were successfully transmitted back to the Earth, and six were published (frames numbered 26, 28, 29, 31, 32, and 35). They were mankind's first views of the far hemisphere of the Moon.

More info: http://www.svengrahn.pp.se/trackind/luna3/Luna3story.html#Film



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, November 25, 2013

A British Bicycle (and Workshops)


Experiments in Speed from SpindleProductions on Vimeo.


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, November 21, 2013

BITX Build Update #20 -- Switchable Crystals, South Africa QSO


I got tired of popping the hood and manually changing my VXO crystals.  First I tried to switch the rocks using a rotary switch on the front panel, but I think the leads were too long and the output was kind of squirrely.   So I dug around in the junk box and found a 12 volt double pole double throw relay.  I put the crystal sockets across the two poles and ran leads from the armature terminals to the crystal terminals. I use the rotary switch to activate the relay.  I cover about 41 kHz of the 17 meter band with the two crystals. 

17 meters has been in great shape.  On November 16 I had a very nice contact with Syd, ZS1TMJ in Glenwilliam, South Africa.  That's about 8000 miles on 5 watts SSB.   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, November 20, 2013

Naval Gun Turret as EME Dish Mount (VIDEOS)



Hack-A-Day ran a story on EME pioneer Zoltan Bay.  In the comments section someone posted this memorable video about a moonbounce station in Central Kansas.  Wow.  Putting using naval gun as an AZ-EL rotor for the dish is really thinking outside the box.   Then deciding to put the whole thing atop another tower...  Great stuff.



Here is another moonbounce video. VE2ZAZ was using a smaller antenna (!) and JT65. FB.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, November 17, 2013

M0XPD's Digital Analog BITX -- Best of Both Worlds


Paul, M0XPD, has built a very interesting version of the BITX rig.  His is on 40 meters.  It features plug in bandpass and IF filters (great idea!) and uses DDS technology for both the BFO and VFO stages.  Good going Paul!  More details here:
http://m0xpd.blogspot.co.uk/2013/11/rising-to-challenge.html

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, November 15, 2013

Standard Computer Crystals for 17 Meter SSB VXO and IF Filter


Pete Juliano, N6QW, is an electronic  genius.  The ideas in his SPRAT article will be of great use to all those who share in Doug DeMaw's devotion to VXOs and reluctance to spend money.  I'm really tempted to go back and re-do my BITX using Pete's 11.52 MHz computer crystal super-VXO and 4.9152 IF (I could then take my expensive 23.1 MHz crystals and put them back in my Doug DeMaw Barebones Superhet).  I also like Pete's DPDT reed relay crystal switcher too.  Three cheers for Pete Juliano, Doug DeMaw, and SPRAT!  And thanks to WB9FLW for reminding us of Pete's articles.

Hi Bill,
 
Your BITX17 really has me fired up! I came across an interested Super VXO by Pete N6QW for use on 17 Meters.

He uses standard computer xtals (4.9152 MHz for the IF) and (3 - 11.520 MHz freq doubled in the VXO)

This gets you on 18.120 to 18.150 using these two standard xtals.

See Link Below:
 
http://www.jessystems.com/SPRAT%20Article.pdf

http://www.jessystems.com/Images/23%20MHz%20VXO.jpg



Thanks for all your efforts they are much appreciated!!

Best Wishes,
Pete WB9FLW
 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, November 14, 2013

Beautiful French Aerial Photography Project. UPstagram! (Video)



We've put cameras in kites and rockets, but I think this is much cooler.

More details (and pictures) here: http://hackerloop.com/upstagram/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column