German Radio Amateurs Receive Signals from ICE Spacecraft

The wizards at AMSAT-DL have done it again!  Their latest feat of outer space derring-do is the reception of the 5 watt (QRP!) signal from the lost (now found) ICE spacecraft.  Details here:
http://amsat-uk.org/2014/03/09/radio-amateurs-receive-nasa-isee-3ice-spacecraft/

Here is their facility:

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

I Too Built a Tuna Tin 2

I didn't plan on doing this.  I didn't even really want to do this.   I've become a phone guy -- I'm not into CW anymore.  I figured I'd just finish the Herring Aid 5 receiver and settle the score from 1976 and that would be it.  But everything I read about the Herring Aid 5 included references to the iconic Tuna Tin 2.  Obviously I was also under the strong influence of my late February encounter with the original TT2 at the Vienna Wireless Winterfest.  That Mojo is powerful stuff!   Then my wife brought home this can of Russian tuna.  The dimensions were perfect.  Then I looked in my junkbox and found 40 meter CW crystals.  That was it. I had to do it. 

I built mine Manhattan style, using several of W1REX's fantastic Me-pads.   I also used as the final a transistor that Rex gave me at Winterfest. Thanks Rex.  Soul in the New Machine. 

I'm getting about 200 mW out.  I;m on 7030 kHz and 7040 kHz and 7110 kHz.   I have the TT2 up with my Drake 2-B (Herring Aid 5 integration will come later).  I can feel the Mojo. 

I just had my first contact with the TT2:  I called CQ on 7110 and AB2RA came back.  Jan was running 20 watts from an old 807 rig, listening with an old Hammarlund.  So it was HB transmitter and vintage receivers on both ends!  FB!





Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Lulu Book Sale, Job Openings

Lulu is running a 20% off sale on books.   You can pick up SolderSmoke -- The Book at a discount.  Just use the coupon code SUPER20  :
http://www.lulu.com/spotlight/soldersmoke

And as long as we are talking about money, I spotted some job openings that might be of interest to readers of this blog: 

http://makezine.com/2014/03/06/wanna-work-for-us/

http://hackaday.com/2014/03/06/were-hiring-2/


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Some notes on the Herring Aid 5

Sure, this receiver is not "state of the art."  But that's the whole point.  I wanted to finish the receiver project that I couldn't finish back in 1976. 

I tried to stick as close as  possible to the original design and parts.  NORCAL came up with an updated schematic in 1998 with parts that are more readily available.  But Designer Jay Rusgrove was shooting for something that could be built with all the parts coming from Radio Shack.   I think that is probably one of the factors that attracted me to the project way back when.  That's why Jay went with varactor tuning (no hard-to-get variable caps!).  And that's why he used coils that were wound  on Radio Shack 10uH RF chokes (no need for hard-to-find toroidal cores).  In this sense there is some common ground between the BITX rigs and the Herring Aid 5.

I stuck with the RF-choke as a coil idea for the VFO, but went with the NORCAL-prescribed toroids for the front end and mixer coils.  (I may go back and try to use chokes in these circuits, but I'm not sure my junk-box will yield the kind of RF chokes that Jay used).

I wish I had known a few things when I was building this back in 1976: More knowledge about how to wind the coils would have been a big help.  I wish I had realized that I could use a SW receiver to get the oscillator on the right frequency. I guess this was in the days before Ugly and Manhattan building techniques, but it would have been nice to know that there was no need to actually etch a board for this project (I did!).

The coils really are a bit tricky.  Jay didn't use any trimmer caps, so I guess you had to just hope that the front end coil and cap resonated somewhere near 40 meters.   As for tuning the oscillator, Jay recommended scrunching and un-scrunching the turns on the RF choke.  Yikes!  Give me some trimmer caps! 

I also found that you have to watch the level of the RF going from the oscillator to the mixer.   Too much, and the receiver is deaf.  Too little, same result.    You need to experiment a bit with the number of turns on the pick-up coil from the oscillator.   

The warnings about the pitfalls of that single BJT mixer were right on the mark:  Lots of AM SW breakthrough.  But I kind of like the background music.   Strong RFI from local FM broadcast stations was another story (WMZQ is a country music station!).  I reached into my junkbox and found a low-pass filter from a Heathkit DX-60.    I just put that between the antenna and the receiver and the country music was GONE! 

I really love this little receiver.  I have it playing 40 meter CW as I type.  It sounds great.   I feel the urge to built a Tuna Tin 2 and put both of them on 40. 

In the original Tuna Tin 2 article, Doug DeMaw notes that Jay Rusgrove was thinking of doing a companion receiver and says that he was thinking of calling it the "Clam Can 5" !  There were jokes about receivers for hams with "tin ears" and about there being "something fishy" about these rigs.

Thanks to Doug DeMaw and Jay Rusgrove and QST for bringing us these little circuits. 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Herring Aid 5: Working after 38 years!

I know, it is just a little Direct Conversion receiver.  Getting it going is no great technical achievement.  But this little receiver gave me such trouble as a teenager, it has been in the back of my mind for a long time.  Finally, yesterday afternoon it started picking up signals. 

I felt a bit bad about insinuating (a few days ago -- see below) that QST may have made an error in the 1976 schematic.  They didn't.   So it was kind of spooky when I heard that first call-sign coming through the speaker:  It was W1AW!  It was as if they were saying:  "See, the schematic was correct!"

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Herring Aid: It was NOT the dots! Rotational Sense and Phasing

Opposite "sense" winding and resulting phase shift

My second attempt at building a Herring Aid 5 (the first was 1976) continues. 

I thought I had discovered an error in the schematic that (I hoped) explained my failure to get this simple receiver running (scroll down for details).  But Dex, ZL2DEX,  in New Zealand spotted something that got QST off the hook and put all the blame back on me:

I had failed to check the rotational sense of the windings.  The schematic called for 4 turns over the Radio Shack choke.  So I just went ahead and wound them.  I didn't pay any attention to the direction of the winding.  I then hooked it up in accordance with the phasing dots in the diagram.  And it didn't work.  So I switched the coil connections around.  And it worked.  Aha! I thought! QST messed up!  It wasn't my fault. 

Dex brought me back to reality.  He noted that I probably wound the coils with the wrong rotational sense.   I confirmed this.  I rewound the coil following the rotational sense of the choke.  I hooked it up following the phasing dots of the schematic.  This time the oscillator started right up.  So the problem wasn't an incorrect drawing of the phasing dots.  Instead it was my failure to remember that phasing is more than just the top or the bottom of a transformer's winding.  Rotational sense is also important.  That's why "phasing dots" are sometimes referred to as "sense dots."

This doesn't come up very often, because most of the toroidal transformers we make are bifilar or trifilar -- the windings are always in the correct sense because we twist the wires together before putting them on the coil.  When we look at those phasing dots, we are focused on getting the proper tops of coils connected to the appropriate bottoms of other windings.  We don't pay any attention to the sense of the windings.  Thanks to Dex for bringing me back to my senses :-o

Grob's Basic Electronics has this definition for those phasing dots:

"	Used on transformer windings to identify those leads having the same instantaneous polarity."

This morning I did a little experiment to confirm all this:  I took a toroidal core and wound a little transformer.  Using a dual trace scope, I looked at the input and output wave forms.  Sure enough, when the windings are in the same rotational sense, there is no phase shift.   But when that secondary is wound in the opposite sense, you get a 180 degree phase shift.  I know this is very basic, but it was fun to re-learn it and to confirm is.

But I still don't have the little receiver running.  I think there are a few problems.  That single BJT mixer stage needs a lot of RF (2.5 volts p-p) from the oscillator.   Also, I think the 10 uH chokes that I am using are not the same as the chokes used in the original Herring Aid design.  So when I build transformers on these chokes, they don't work very well.

But I will keep at it.  It has been 38 years... I can wait another week or two.   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

38 Year HB Mystery Solved? Was it the phasing dots?

 During the summer of 1976, at the age of 18, I made an audacious attempt to join the ranks of the true homebrewers.  I tried to build a receiver.  It was the Herring Aid 5 from the July 1976 issue of QST, a 40 meter Direct Conversion receiver intended for use with the famed Tuna Tin 2. As I have recounted (perhaps ad nauseum), I never got it to work.   My recent encounter with the ORIGINAL Tuna Tin 2 (Mojo was transferred to my BITX17, and it definitely works better now) got me thinking about this painful experience.   I decided to try again.

There is an updated NORCAL schematic for this rig.  I found it (and some good articles) on the NJQRP club page.   In the original, designer Jay Rusgrove, WA1LNQ, used only parts that could be found at Radio Shack stores.  In the days before the internet and Mouser, this was a good idea.  Instead of toroidal ferrite and iron powder coils,  Jay built his coils around Radio Shack solonoidal 10 uH chokes. 

The NORCAL version dispensed with the Radio Shack chokes, and used toroids.  But I wanted to try to find out what went wrong 38 years ago.  So I dug up some 10uH chokes. 

I know that my problem was that I never got the oscillator working.  I remember being able to hear signals with my "almost" receiver when I put my HT-37 in "CAL" mode and tuned through 40.  I was so close!  The Herring Aid was picking up RF from the HT-37 and using that in lieu of the LO energy that obviously wasn't coming from my Herring Aid VFO.  But WHY didn't that oscillator work?

Today I started with the VFO.   Again, it didn't work!   But now I have decades of troubleshooting experience under my belt.  So I poked around a bit.  Then I decided to look closely at the phasing.

Take a look at the schematic(above) and the picture (below).  L7 is the 10uH choke.  L6 is 4 turns wound over it (or adjacent to it).  Now, here is the key question:  Look at the phasing dots.  How would you guys connect those coils?   For me, the schematic indicates that the TOP of L6 should go to the Zener and the BOTTOM of L6 should go to the drain of the JFET.   The TOP of the choke should go over to C5, and BOTTOM of L6 should go to ground.  Right?  Or am I reading the phasing dots wrong?

Well, the oscillator was not oscillating in this configuration.  Then I did something that I might not have known to try back in 1976:  I reversed the phase of L6:  I put the top of the coil to the Drain of the JFET and the bottom of the coil to the Zener.  Bingo.  The joy of oscillation.  Now it works.  (The picture below shows it as it is when the oscillator is working well.)

So,  is there an error in that diagram?  Was this not all my fault?   

Aha! I just looked at the schematic of the NORCAL version.  Check out the dots!   I think that was the problem!

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20