Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, May 30, 2015

BITX DIGI-TIA Build Update #6: Boxing it up!

 
Basic Basswood Box (From Michael's or Amazon)

 
Space cut out for Si5351 board and for AF Gain and Mic jack

 
Copper flashing placed (from Home Depot)

 
Amplifier Chain placed along the back
 
 
Note Plug-In Low Pass Filter

 
Starting to look Rig-ish

 
The View from Above

 
Still to do:
 
Socketry along the back (Antenna, 12V, external amp T/R control, Speaker, MAYBE:  IF connection).
 
 
Relay wiring (I'm trying to do this with just 2 DPDT relays: one for Low Pass Filter switching and External Amp T/R control,  and one for 12V T/R switching, and Bandpass Filter switching.
 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, May 27, 2015

BITX DIGI-TIA Update #5: Amplifiers Built and Tested


I have the RF amplifier stages done, and I worked a bit on the shielding.  This circuit board will be along the back, turned around, with the copper-clad shields between the amps and the rest of the rig.  In the picture you can see the small inter-stage shields, and one that put between input and output on the final.  All this in the probably vain hope of avoiding the Agony of Oscillation.   We'll see.  So far so good.  I get about 8 watts out of the IRF510 on 40 meters.  53db total gain for the three stages.  Of course, all this will likely change once the rest of the rig, the LP filter and an actual antenna are added.
 
As for the mic amp problems I mentioned last time, well,  I discovered on earlier BITX projects that one of the resistors in the base circuit needs to be changed from 10K to 39K.  It is kind of a long story (maybe for the podcast) but essentially I had to discover this AGAIN.  More details here:
 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, May 26, 2015

BITX DIGI-TIA Update #4


 
Lots of progress over the long weekend.  Along the back you can see the three stages of the RF amplifier chain:  2N3904, 2N2218A, IRF510. I intend to add inter-stage shielding, and one long shield between the chain and the rest of the rig.   Front and center is the Si5351 board (code by LA3PNA).  Mic amp (which gave me a lot of trouble!) is to the right of the Si5351.   AF (RX) amp is to the left (2N3904 and LM386).  The big board in the center has the three Termination Insensitive Amplifiers (thanks Wes and Bob), the 9 MHz filter (thanks Steve Smith!) and the two SBL-1 mixers (thanks to Pete Juliano for the "mil-pad " boards).  And thanks to Farhan for the overall BITX concept and the TIA suggestion.  
 
In the upper right you will see where the plug-in low-pass filter will plug in (a better picture appears below).   I will use a similar plug-in for the band-pass filter.   Combined with the BFO/VFO flexibility of the Si5351, this plug in feature should allow me to cover many bands with this rig.    
 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, May 24, 2015

Sage Advice on Homebrewing from WA3EIB


Bill, Pete,
 
Thanks for the sage advice.
 
You are absolutely right, I should stick to the plan and finish the project before tromping off in a different direction.
Anytime I've ever changed designs before I have completed a task, usually results in something far less than expected.
 
The real joy is completing a project and looking back at what was accomplished.
 
My own personal goals for the Minima Transceiver Construction include...
 
1. Build it from SCRATCH - Manhattan Style.
2. Start with modular construction - so that each circuit can be tested, troubleshot and modified in the future.
3. SMA connectors and coax to every stage so, I can divide and conquer the function of all modules.
4. Document the entire journey so I can actually see where my learning's took me.
5. Provide myself, a basic building block for future transceiver construction and designs.
6. Improve my skills, techniques and knowledge through my mistakes and understandings. 
7. Learn to SLOW DOWN, study, plan and write, in my own words, what the circuit(s) do and how they function.
8. Be a mentor to others and share what I have learned.
9. Be more of an Amateur Radio Experimenter and less of a Ham Radio Operator.
10. Continue to dream and design.
 
Each day should be NEW and EXCITING. There should be a thrill in every step of the way, even in the midst of failures.
 
Thank you both for taking the time to respond.
Thanks for the encouragement and sharing what happens on your own bench.
 
73's
 
Harv -=WA3EIB=-


---------------------

More inspiration from Harv here:
http://soldersmoke.blogspot.com/2012/09/an-ode-to-old-time-radio-by-wa3eib.html

And here:

http://soldersmoke.blogspot.com/search?q=WA3EIB

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Thursday, May 21, 2015

Frank Harris and the Nobel Prize for Sideband

A lot of wisdom and good info in this chapter (and in the whole book);

http://www.qrparci.org/wa0itp/chap15.pdf

http://www.wa0itp.com/crystalsetsssb.html

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, May 20, 2015

National RF

 
Pete and I both spotted the ads in QST for this company and their little HF receiver.  In the finest tradition of Tuna Tins and Herring Aids, that receiver is in a SPAM can.   FB. 
 
 
I visited the company's web site this morning.  Lots of great stuff!   They are based in San Diego.  Who are the radio wizards behind this effort? 
  


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, May 18, 2015

BITX DIGI-TIA Build Update #3 Video of Receiver in Operation



A few things I forgot to mention in the video:

That USB port on the front panel has already come in handy.  I needed to switch the tuning increment from 1 kHz to 100 Hz.   I just went into the Arduino program, removed one zero, and then re-uploaded the code.  

I also put to use the sideband inversion rule-of-thumb:  My IF is at 9 MHz.  I want to receive signals in the 7.2 MHz range, and I want the VFO running ABOVE the IF frequency.  So obviously the VFO will be running at around 16.2 MHz.  So, rule-of-thumb time:  Will I be subtracting the frequency with modulation from the frequency without modulation?  Yes I will!  So, there will be sideband inversion.  This tells me where to position my BFO frequency.   The signals on 40 start out as Lower Sideband.  But as explained above, by the time they get to the filter they will be inverted and will be upper sideband signals.  So I need to put the BFO slightly BELOW the filter passband so that I can tune the signals in such a way as the sidebands fit into the filter passband and have the proper frequency relationship to the BFO to allow for demodulation. I put it at 8.9986 MHz.  With the Si5351, changes to the BFO and VFO frequencies are very easy.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column