Just go to http://soldersmoke.com. On that archive page, just click on the blue hyperlinks and your audio player should play that episode.
http://soldersmoke.com
Tonight I have had my first experience with the joy of oscillation! I'm so happy to have my M3 oscillating! This was a great first project and look forward to seeing if I can't build a lowpass filter to go with it. As you recommended Bill, I reconfigured my initial board to make things much more compact thus keeping the lead length short. For the coil, i used a 1.25in wooden dowel and it worked great! Here are a few photos. Thanks a lot for the crystal! Video will be coming soon.
Looking forward to Pete's 40m transceiver project. Keep up the great podcast!
I just had my first QSO with my ZIA transceiver! Contact was with W8ERN in Brighton Michigan, which is approximately 300 miles from my QTH in Nashville Indiana. W8ERN said I was barely audible and was surprised that he could hear me at all. Especially when he found out that I was running less than 5W on an end-fed wire. From what I heard, band conditions were pretty poor due to a magnetic storm.
Sorry I didn't get any video of the QSO. I heard him calling CQ and just answered. I didn't expect him to return my call. Btw, this was my first QSO as an amateur. I was a bit nervous, I don't know why. I plan on installing a 40M dipole before winter sets in so, hopefully my signal will get out a little further.
I have one other question. I am considering purchasing a used rig in the next few months. What would either one of you recommend? I am not abandoning my home-brewing but it would be nice to have a back up rig when conditions are bad. My budget is around $200 or so, and I don't mind something that might need some repairs. There is a hamfest in Fort Wayne(my hometown) next month, so I might go up there and do some shopping.
Thanks again for all of your encouragement and knowledge.
73's
Dean AC9JQ
------------------------------
Hi Dean,
Congratulations on your first contact on the TIA AND your 1st contact as a ham. Bravo. Time to have a real celebration. Get cracking on that antenna before you have snow on the ground!!!
W8ERN, Angelo is an outstanding amateur and and a real gentleman. He has a very interesting past life. I think he worked for Multi Elmac and Central Electronics. During the 1940’s to 1960’s these companies produced some of the best ham gear. The AF-67 Transciter and the PMR8 were used mobile and of course the CE 100V and 200V were the first No Tune vacuum tube transmitters. So you were talking to one of the radio gods.
Again Congratulations Dean --- Bravo.
73’s
Pete
--------------------------
Dean:
Wow that's great. Indeed the band conditions are about as bad as they get. So bad that they are seeing Northern Lights (Aurora) far south into the USA. Give it a few days and you will find much better conditions.
My advice on a commercial rig: DON'T! You may think that they'd do better when conditions are poor, but they really won't. If you want a bit more power, build an amp for the TIA.
You are off to such an amazing start as a true homebrew ham. Stay on the homebrew path. Build a completely homebrew station! Congrats!
Thanks very much for the mention in your tenth anniversary podcast! It is great to know I am embedded in internet history even though I am not that important.
I enjoyed listening to you and Pete on the recent Soldersmoke Podcast. I really got a kick out of the various discussions and thought I would weigh in. I am sure you have heard someone say "Well actually...", so here are a few from me
Grand Pooh-Bah is, as you say, a Flintstones character, but it is not the the origin of the term. It actually goes back bit more than a century. The original character was named Pooh-Bah and was Lord High of nearly everything. He appeared in The Mikado by Gilbert and Sullivan in 1885.
There really are a fair number of non-software experiments that can be done with SDR. My first SDR was a set of boards assembled by Gerald when he was first starting Flexradio in 2002. His plans were very much homebrew and were published in QEX July/Aug 2002. My second SDR was a homebrew kit put together by Tony Parks, KB9YIG in 2005. He still sells SDR kits as fivedash.com. All this is very much home brew and does not rely on obscure hardware blobs. Have a look at the schematic for the current softrock at Ensemble II Schematic.pdf. It only uses "jellybean ICs".
According to the Smithsonian magazine, "Despite their modern reputation, the original Luddites were neither opposed to technology nor inept at using it...A seemingly endless war against Napoleon’s France had brought 'the hard pinch of poverty,' wrote Yorkshire historian Frank Peel, to homes 'where it had hitherto been a stranger.' Food was scarce and rapidly becoming more costly. Then, on March 11, 1811, in Nottingham, a textile manufacturing center, British troops broke up a crowd of protesters demanding more work and better wages." It was only later that they became associated with resenting the machinery.
I am also enjoying your discussion of the changes to our technology and how it affects hams and other technical people. I came into electronics as a young boy and at that time transistors were just beginning to displace tubes as a dominant force. I definitely remember the older techs saying, "These new transistor things are just sand-in-a-can; how can anyone know how a circuit operates with them."
About 12 years later when I was in college I heard exactly the same comment as "jellybean" Integrated Circuits (7400 and 4000) began to displace discrete transistors. There was much musing about how the future would be one of just plugging ICs together and no design talent would be needed or developed. Fast forward another 20 years and the microprocessor moved from Primary CPU, to cheap CPU, to PICs and Atmels. Here came the same comment lamenting the loss of ICs that "we could understand" and "no more electronics is needed, just hook the blocks and write the software."
Now about 10 years from then we are seeing complete transmitter and receiver modules, zigbee, wifi, and many other Adafruit style drop-in modules. I figure it is about time to hear that old saying once again. You and Pete need to be careful as you dance about it, don't fall into the trap !
So in the immortal words of Blaise Pascal in 1657, "I have only made this letter longer because I have not had the time to make it shorter." Keep up the good work and great podcast!
In our last podcast I mentioned that I had a very interesting contact on 17 meters with Raul Midon AE3RM. This morning Raul's song "Tembererana" popped up on my Pandora feed. The song is great, but is was the album cover that attracted my attention.
Raul has an amazing personal history. Born in Argentina, he and his twin brother have been blind since birth. They have both obviously triumphed -- his brother is a NASA engineer.
From the Wiki: Midón's album State of Mind was released on May 10, 2005. The album features a guest performance with Stevie Wonder, one of his idols, another one with Jason Mraz, and a song written in tribute to Donny Hathaway entitled "Sittin' In The Middle." Midón is an avid amateur radio enthusiast,[2] and in this song he also incorporates his call sign (KB5ZOT) by using Morse code.
Here is his QRZ page: http://www.qrz.com/db/KB5ZOT In it he writes: "He has been an amateur radio enthusiast since Mrs. Redmond introduced he and his brother to the hobby back when they both attended the New Mexico School for the Visually Handicapped." Good work Mrs. Redmond!
Here is Raul's antenna in Maryland. Maybe he was thinking of this when he designed the album cover!
The rules and regulations in this part are designed to provide an
amateur radio service having a fundamental purpose as expressed in the following
principles: (a) Recognition and enhancement of the value of the amateur service to
the public as a voluntary noncommercial communication service, particularly with
respect to providing emergency communications. (b) Continuation and extension of the amateur's proven ability to
contribute to the advancement of the radio art. (c) Encouragement and improvement of the amateur service through rules
which provide for advancing skills in both the communication and technical
phases of the art. (d) Expansion of the existing reservoir within the amateur radio
service of trained operators, technicians, and electronics experts. (e) Continuation and extension of the amateur's unique ability to
enhance international goodwill.
----------------------
On a recent podcast I mentioned that I like the phrase "the radio art." I also mentioned that I heard some objections to this term. A couple of guys wrote in on this --see below. I found out that the phrase features prominently in Part 97 of the U.S. Code of Federal Regulations. This is the document that establishes ham radio in the U.S. (see above) I really like the last line of the first section of Part 97: e) Continuation and extension of the amateur's unique ability to enhance international goodwill. Yea! That's us! The International Brotherhood of Electronic Wizards!
------------------------
Bill:
Was listening to episode 180 and heard you mention that some people had taken exception to using the label “Art” for radio electronics. You should refer them to the Webster’s definition of art,
art. noun \ˈärt\ : something that is created with imagination and skill and that is beautiful or that expresses important ideas or feelings.
Often the patent office, much older than radio, will invalidate a patent application based on “prior art”.
Keep up the great podcast! As soon as I finish a couple of other projects, I’m going to try to build Pete’s LBS design. First, I have got to get a mobile rig installed in my new truck, commuting without it is just too boring.
Going even further, the basis for our patent system is in Article One, Section 8, Clause 8 of the US Constitution:
"To promote the progress of science and useful arts, by securing for limited times to authors and inventors the exclusive right to their respective writings and discoveries;"
Tom Hall does amazing things with solder and electrons in the heart of New York City. I give him extra credit for doing this on the island of Manhattan because 1) that's where I'm from and 2) EVERYTHING is more difficult there.
I may have presented this video before. If I didn't, I should have. And if I did, well, here it is again (I guess my NYC attitude is showing here).
Look at the ease with which Tom switches bands. Fantastic! But even more important, LISTEN to the quality of the reception. Listen as Tom tunes in on strong CW and SSB signals. Do you hear any signs of the dreaded phase noise that is supposed to plague the Si5351 chip? I do not. I think this receiver sounds great.
I don't know why the Si5351 got such a bad rep for noise. Could it be that some people were testing it with boards other than the Adafruit or NT7S products that we have been using? Could it have been that in the tests the boards weren't completely installed? (It is important to have the VFO and BFO signal lines properly shielded.) Could it be that in the tests they were using physically adjacent clock outputs from the board? (We use CLK0 and CLK2, skipping CLK1 to avoid the "bleedover" problem that was noted by early users.)
Wow, this project is very appealing. Finally, a 3D printer project that seems truly useful. They are using one of the Dongle receivers we've been playing with, and, of course, Arduinos. You could really geek-out with this stuff. Check out the hardware side of this effort here: https://satnogs.org/documentation/hardware/
As a result of Elisa's suggestion, more than 1300 people downloaded the free Kindle version of "SolderSmoke - Global Adventures in Wireless Electronics." I hope they liked it. If you did enjoy the book, please spread the word about it (you can use the e-mail button below to forward this post to friends and relatives), and please put a review on the Amazon Kindle page.
In the course of following up on Elisa's idea, I discovered that Amazon Kindle has a program that will allow me to make my more recent book available for free (for a limited period).
So the Kindle version of "Us and Them -- An American Family spends Ten Years WITH FOREIGNERS" will be available for free from October 3 through October 7. Please send me feedback, please let your friends and relatives know about the book (again the e-mail button below is good for that), and please post reviews on the Amazon page.
You can find the Kindle book here. It will be free from October 3 through October 7, 2015
For the last couple of weeks I have been plagued by noise on the HF bands. In spite of being in a very built-up area of Northern Virginia, I usually have low noise levels. But for the last couple of weeks I've had intermittent but frequent arcing noise. It sounded like classic power line arcing.
My 17 meter Moxon antenna provided a clue as to where it was coming from: As I spun the antenna around, the noise was always a lot stronger to the North-North West.
On Wednesday morning on the way to work I noticed that the fire department and the power utility were working frantically on a pole about a mile from our house. It had obviously been on fire -- it was still smoking when we went past.
When I got home I was pleasantly surprised to find the arcing noise gone. It took me a few minutes to make the connection -- yes, the smoking power pole was to my North-North West.
OBVIOUSLY THE RADIO GODS CAME TO MY ASSISTANCE!
This was a good demonstration of the fine front-to-back characteristic of the Moxon antenna. And a reminder of what radio signals sounded like in the days of spark.
I think it sounds great! There is nothing really wrong with it -- that is what 40 meters sounds like! Sure there is static. And those whistles you hear near the top of the band are the carriers from shortwave broadcast stations. You might have a little hum, but that should disappear once you get it all packaged in a metal box. Congratulations Bryan! You have done something that very few hams have done: You have built a receiver. 73 Bill N2CQR
......................
Hi Bryan,
First let me congratulate you. That is one fine build and you may actually have absolutely nothing wrong!!!!!! I really must applaud your “squares”. They look like they were made on a CNC machine. Bravo!!!
You are operating the LBS without an RF amplifier and as such you are trying to make up the gain in the audio amp. I would say that the results you are hearing are very consistent with the DCR without an RF amp. Get the RF amps stage working and then run your test –you will find with the RF amp that at the gain setting you have for the video will be room filling. It actually sounds pretty good. You might also try connecting a 1 NF across the audio trimmer pot as that will cut down on the “hiss’ sound.
Concentrate on the RF amp stage and then re-run your test –you will see the difference.
Great build – very nice job.
73’s
Pete N6QW
....................
Very nice!
Sounds pretty good to me in terms of noise – that’s what a direct conversion receiver sounds like (they tend to be very wide in terms of reception – static is normal... Welcome the world without noise reduction and DSP!!). DCR’s – because they are not run through a narrow IF filter – allow a very broad range of signals to get to the audio stage. So, for example, if you tune that around during a CW contest, you’ll hear a LOT of signals at the same time – versus only one or two at a time, once you have this run through the 4.9152 crystal filter. That’s the nature of the beast.
The 1nf across the audio trimmer definitely will help with reducing the hiss, although I must say my Kenwood receivers all have a similar amount of hiss and I prefer my radios with more, not less, noise (it lets me know what the band conditions are like...). I have noticed on my builds, however, that if you have a very, very high pitch WHINE on the other hand, that tends to be a bad solder joint or bad capacitor somewhere – probably on a capacitor – introducing an offset into your RF someplace it shouldn’t. What that looks like on an oscilloscope is the audio signal will have a large DC offset versus ground – almost always a bad solder joint on a capacitor—or a bad/broken capacitor--somewhere in the audio amplifier. That’s the same problem you get when you try to record audio sometimes from an external source (TV, radio, CD player) on your computer – DC voltage offset on the audio line. Kind of like what you might have heard on a stereo if you ever tried to switch to a channel where the input was hanging open.
"SolderSmoke -- Global Adventures in Wireless Electronics" is now available as an e-book for Amazon's Kindle.
Here's the site:
http://www.amazon.com/dp/B004V9FIVW
Replies from the Ergonomics vs. Performance poll
-
Yesterday, I posed the following question and asked for your input: “Which
aspect of a QRP radio holds more importance for you: its ergonomics (ease
of use...
March 28, 2024. Just another Day at the Office.
-
FT-8 with a RPi Zero W
Given the FT-8 achievement maybe even QUISK would work on the RPi Zero W
for a really small SDR Transceiver.
But all that g...
Pacific Odyssey: Latest Novel by DXer Ralph Perry
-
Many thanks to SWLing Post contributor, Ralph Perry, who shares the
following announcement: Big news here is that after five years of hard
work, yesterday ...
The GM3OXX “Oxo” Transmitter
-
As well as the small stash of finished projects that grace my living space,
I also have two small boxes containing various boards. Some of them are
boards ...
Handy breakout board for Raspberry Pi Pico
-
Just picked up a few of these breakout boards. I'm not sure that I like the
screw terminals but it is handy having LEDs on each GPIO pin. I'm really
gettin...
Repairing a dead Kenwood TS-850S
-
Recently, a Kenwood TS-850S - a radio from the mid-early 1990s - crossed my
workbench. While I'm not in the "repair business", I *do* fix my own
radios,...
A 51S-1 Restoration Story
-
I came across my Collins 51S-1 in a big junkyard in Ankara, Turkey around
2012. It was in a pile with a lot of other electronic scrap, probably from
one o...
New QRP Cluster Online From OM0ET and OM6APN
-
By DX EXPLORER
DX EXPLORER
Paul OM0ET and Peter OM6APN recently launched a new cluster dedicated to
QRP operations. Have a look and I hope you will enjoy...
3D Printing The Hadley 114mm Newtonian Telescope
-
Yes, we’re building a 3D Printed Newtonian Telescope called Hadley. It’s
being printed in PETG and in the video below, I give a quick tour. My build
isn’...
3D printed project boxes
-
I have been busy with some other things that have kept me away from
electronics projects for quite a while. Now I can get back to them, but
realize I n...
Daylight Again – An all Analog Radio
-
What’s all this? In 10 seconds, A high performance, 7MHz, 5 watt SSB rig
Draws just 24 mA of current 90 dB dynamic range, 80 dB close-in dynamic
range 3D ...
Adding Enclosure to your sBitx Boards Order
-
The early buyers of the sBitx board set who bought it for $270 USD might
want to also add the enclosure (box) for in the kit. What you will now get
is a f...
Digi-chirp! Digital synthesis of ‘nostalgic’ CW
-
The bottom ends of 80, 40 and 20m are not what they used to be. For
starters, the busiest part is the digital segment where computers talk to
computers – l...
-
A Simple Speech Processor
(For QRP/SSB Homebrew Transceivers )
Over the last few weeks I had been thinking to build a small AF speech
processor to add to...
A New Look for your uBitx!
-
Adding a "Cool Blue" Display to your uBitx!
The standard "green background" with black lettering frequently reminds me
that I suffer from Chronic seasickn...