Arecibo in Danger

http://www.extremetech.com/extreme/230637-flat-science-budgets-could-kill-the-arecibo-observatory-the-worlds-largest-telescope

Some Sympathy from the New York Times Crossword Puzzle

Hi Bill,
Pete "The Crossword Guy" K4PHS here again.
In the New York Times Crossword for Tuesday June 21, 2016 the clue for 52 across is:
"Enough, Enrico!"
And the answer is:
"Basta!"
72, Pete, K4PHS

And from October 5, 2015

Hi Bill,

The clue for #7 across in todays New York Times Monday Mini Crossword puzzle is:

“special talent”

And, of course, the answer is KNACK!

72, de K4PHS Pete
"Keep Calm and Melt Solder"

An Excellent Morning at the Manassas, Virginia Hamfest

I was quite pleased with the valuable items obtained at the Manassas Virginia Hamfest this morning.  Armand WA1UQO and I once again combined forces, offering each other advice and counsel (NO!   Forget it!) as we went through the flea market. 

Above you can see what I got:
TOP ROW: 1)  A bunch of boxes.  Nice aluminum boxes and two really good chassis.  I may now have to build something with thermatrons.   Armand gave me a really nice Ten-Tec box.  Thanks Armand!
MIDDLE ROW 2)  Ten much needed coax patch cords.  I promise to check the connections before using them.  Really.  I mean it this time. 
3)  A nice circular coax switch.
4) Two large hemostats.  I told the woman I needed them for some surgery that I'd be performing later in the day.  She was not amused.
5) A homebrew SWR Monimatch box.  Amazing.  Dennis Klipa and I have been talking about these, so I bought this homebrew version.
6) Nice Jackson Brothers reduction drive with tuning indicator. 
7) Really nice variable cap.
8)  Three crystals: two for 3.579 MHz CBLA work, the other for 40 meter phone.
9) Forehead "coalminer" lamp
10)  Some PC boards.
BOTTOM ROW 11) LARGE box of 455 kc IF transformers

As we were making the rounds we ran into Charles AI4OT.  On the tailgate of his truck Charles had a BITX20 in operation!  You can see it in the picture.  Great to see you Charles and FB on the BITX.

Jan PA3GSV's Amazing Mate for the Mighty Midget

We have featured the amazing homebrew work of PA3GSV before:

http://soldersmoke.blogspot.com/2016/04/my-mate-for-mighty-midget-thermatron.html

Jan is at it again, this time building a Dutch version of Lew McCoy's Mate for the Mighty Midget.  Look at front panel! But wait, there is more!

Here is a side view of the chassis.  Wow.  What, you may ask, is that round thing?

Holy cow!  Homebrew Vernier reduction drive made from the cap of a sewer pipe.  And a homebrew dial cord arrangement.  Jan is clearly breaking new ground in ham radio homebrew re-purposing.

Jan writes:

Bill:

Here a little update on the MMrx.

Got almost all the parts, except for the Miller 4411 300 uH coils, for which I am attempting to make my own.

While I was looking for some pictures of this coil, if it was shielded or not (found a vintage online Miller catalogue J ),

I stumbled across this article, the W2MQ “Hamster”

There is no mention of the MMrx, but the text is very in line with the latter. Nice read.

 http://www.njarc.org/broadcaster/BC2010-04.pdf

 Also while looking for parts, I saw this supplier of FT-241 xtals who sell for reasonable prices ($10) .

Maybe you already know this company:

 https://www.fairradio.com/catalog.php?mode=view&categoryid=198

 Vernier drive 1:19

The drum is made from a sewerage end cap got from the hardware store.

Still under construction J

Added a front control to switch the BFO on/off, together with another crystal or some arrangement to make AM (broadcast) reception possible.

I want to try a regen detector instead of the 2 germanium diodes, followed by a pentode for some more audio output.

Regen and AF gain control are also at the front.

In your video it looked like there was a screwdriver sticking out of the BFO oscillator coil, a trigger to put this control on the front as well J

As there is no AGC, the (S) meter will measure the plate current of the RF amplifier tube.

So, a lot of experimenting to do, and still busy with some of the mechanics.

 73  Jan

Inside a Millen 61455 IF Transformer

I found this in my junk box.   I've put it in my old Mate for the Mighty Midget receiver, in the place of the Toyo  CM455 crystal-mechanical filter (which I found to have excessive insertion loss).  I think its very cool how they squeezed two variable caps into that little can.  Designed in 1956.  Works great.  Note the promised passband: 4.7 kc at 6 db down.  Not bad for an LC device.
Here is the spec sheet: