Oz Tektronix 'Scope Repair (in Juliano Blue)

Rob is a braver ham than I.  When my Tek 465 quit, I tried to fix it, but quickly chickened out.
Very nice that he painted his in Juliano Blue.

Dear Bill and Pete, 

I do enjoy your podcast, and I must present an offering to the "Gods of Homebrew", 

An on-line find of an old Tek 545 oscilloscope presented a chance to enjoy the warmth of 100+ tubes (once repaired)

The outside was heavily scratched, the inside looked like a chicken coup, but no major bits missing or broken. 

Lots of cleaning, testing all tubes,(using the excellent uTracer tube tracer),  replacing the broken 3, remounting the cooling fan, lots of reading about tube oscilloscopes, adjusting the trigger circuit, rebuilding 3 electrolytic power supply capacitors, sandblasting the cabinet and a coat of BLUE paint. 

Voila,  the joy of (visual) oscillation!     (1MHz 2V p-p)

Rob VK5RC

Colin M1BUU's New Receiver Project

Hi Pete,

Just checking in :-)

I have actually been melting solder recently. I decided to build a little CW receiver. I love my regenerative RX that I built as a teenager, but after all these years, I'm tired of constantly tweaking the controls!

My project is a 20m CW only superhet receiver with a 9MHz home brew filter. I'm using the SI5351 for the oscillators. I originally thought I would cover multiple  bands, but for now I have the parts for 20m coverage. I might tinker with other bands at a later point.

I'm using your LBS code on the Arduino, the one for 20m with 9MHz IF. I haven't applied power to the rig yet but it's not far off fully built. I tweaked the Arduino sketch using my Uno and tonight I have successfully transferred the code to a Pro Mini. (Code went into Pro Mini on first attempt - amazing!).

73 for now,

Colin M1BUU

Beautifully Ugly! A Homebrew Receiver from the Netherlands (video)

This one is similar to the receiver I've been working on:  middle of the HF band, discrete components, all analog, 455 kc IF, wooden chassis, eclectic circuit boards.  Very cool.

The builder is Ko Tilman.  His YouTube channel is here:
https://www.youtube.com/channel/UCqe1Y4StR9cZ8BQDWuoMq9w

I came across Ko's channel when I was looking for a circuit for an AM detector.   I have been  experimenting with the standard one diode and two diode (Germanium) circuits, but the receiver doesn't sound very good when using these circuits.   Any recommendations for something a bit better (without getting carried away with complexity)?


About Ko Tilman:

Ko Tilman (1955) lives in the Netherlands and is active in electronics since 1967. His focus is on analog electronics, audio, shortwave radio's, small (solar) energy systems and measurement and control systems. He is the author of "Retro Radio", Isbn 978-90-5381-234-1, published by Elektor International Media in the Netherlands. In this book (Dutch text) you will find several simple schematics from Shortwave radio's (2 MHz - 16 MHz), including radio's with SSB reception. His long time knowledge about small audio systems (for household use) is available in his book "Schematics 2, audio amplifiers and loudspeaker boxes ", available on this website (a summary of the content is visible). Also in an E-book format: Isbn 978-1-4475-7336-4. In the past (2008-2010) he was active on You Tube under the name "radioam232", now he is active on Youtube as "radiofun232". A free download from the activities in the "radioam232" period is available on this website in the content "blueprints 1".

Ko's Books: http://www.lulu.com/spotlight/radioam232

Smoke-Free! On the Air with the W1REX Dayton Hamfest Buddy

After the Dayton Hamvention, our ace correspondent Bob Crane (W8SX) sent me the "Hamfest Buddy" kit that Rex Harper W1REX had put together and used in "The World's Biggest Build-a-Thon."

It is a single 2N2222 crystal-controlled oscillator for 20 meters.   All the parts are plug-in -- no solder smoke is released.   Mine went together in about 15 minutes and fired right up.  You can see it above.  It runs off the 9V battery. I had to hold it down with tape.   You can see the key button in the lower right.  That little inductor in the foreground is used to shift the frequency a bit.  I had to remove the 10K resistor in the emitter circuit because with my antenna the circuit was going into low-level oscillation even in key-up.  With the 10K resistor removed, this problem disappeared.

I hooked it up to my 20 meter dipole and called CQ.   With only about 60 milliwatts into a dipole under poor conditions, I really didn't think I'd get any answers.  But I figured the Reverse Beacon Network might pick me up.  It did:

Thanks Bob!  Thanks Rex!

HB2HB! KW4KD and N2CQR (video)

A couple weeks ago I ran into Jim KW4KD on 40 meter SSB.  Jim is in Chattanooga, Tennessee.  He was running a modern "black box" rig, but he mentioned that he had on the shelf two complete homebrew stations, one of which was for 40 meter SSB.  He hadn't used this gear in 40 years.  I encouraged him to blow the dust off and get it on the air.  Yesterday, Jim did just that.   We met up on 40, first at 1730 local (my time) and again at 1930.   Excellent!  Another HB2HB contact.  Check out the video (above).   Thanks Jim.

If you run into someone who mentions having some old homebrew gear, encourage them to blow the dust off and get it on the air.

Jim's SSB rig: