VK3YE QRP by the Bay Goes VHF/UHF

Peter Parker again hosted the VK3 radio amateurs.  This time the event fell on VHF/UHF Field Day weekend.   So Peter and his friends went up in frequency and up into SPACE!  

VK3HN has a nice blog post here:

https://vk3hn.wordpress.com/2017/11/25/qrp-by-the-bay-chelsea-beach-melbourne-25-11-2017/

Be sure to read about Peter's ankle manacles -- he apparently uses them to get a good ground (sea) plane while running pedestrian mobile on the sea shore. Peter is DEDICATED! 

Listening for Your Own Signals on the Long Long Long Path

I heard some guys talking about this on 40 SSB last night.  A very cool use of the bidirectional pattern of the W8JK beam. 
From: http://qrznow.com/the-w8jk-is-a-famous-and-effective-dx-antenna/

Round-the-world paths The bi-directional nature of this antenna makes it possible to discover open round-the-world paths, something not possible with a normal beam antenna. The technique used by Kraus is to rotate the beam slowly, sending short Morse code dots, with a full-break-in or QSK transceiver. The delay time for the signal to return is about one seventh of a second, so there is plenty of time for your transceiver to switch to receive mode. When you have found and peaked an open round-the-world path, call CQ, and you may be rewarded with DX anywhere along the path. Also, the question of Long-path and Short-path does not arise – you are transmitting on both paths at once, giving you a greater chance of catching the other station’s beam direction….

Videos of iPhone Box DC Receiver

These are just a couple of short videos that I made for my nephew before sending him this receiver. 

As you can hear, deafness is not a problem with this design!   I did make some frequency stability improvements after this video was made -- I think you can hear a bit of drift.  Still, not bad for a very simple circuit using a polyvaricon superglued to the back of a cardboard box.  

I'll post more videos of the second version of this receiver.  There are further improvements in frequency stability.  My goal:  "Juliano Si5351" levels of stable-ness.  

Polyvaricon Variations -- Polyvaricons Are Not all The Same

When I built the first prototype of the iPhone DC receiver, I just reached into my junk box and used a polyvaricon capacitor for the main tuning control. It was marked PL 051.  I was really pleasantly suprised at the stability of the Variable Ceramic Oscillator circuit.  I could tune the entire 40 meter band with complete stability -- Juliano levels of stability. 

By the time I put the second version into its box (see above), I used a different polyvaricon (the one pictured below).  It worked, but with this part the receiver drifted noticeably.  So this morning I pulled it out and put in a second PL 051 Polyvaricon.  Viola!  Eccolo!  Success.  Drift eliminated.  Rock stable.    

Has anyone else noticed variations like this in the stabilty of polyvaricons?  

The dial in this version is an Archer device that has been kicking around in my junkbox for more than 20  years.  I think it was given to me by my old friend Pericles HI8P -- this adds a tremendous amount of soul to this new machine).   The box is an old Bud aluminum chassis.  Man, this thing sounds great.  I will try to post a video soon. 

iPhone Direct Conversion Receiver with Variable Ceramic Oscillator

A while back Bob N7SUR got us talking about winter projects.  Receivers.  Of course, Pete and I quickly went down different paths.  Pete is making great progress with lots of interesting digital circuitry.  He is going over to the dark side. Check it out here: 

http://n6qw.blogspot.com/2017/11/21st-century-homebrew-sdr-ssb.html

I went with simplicity.  Extreme simplicity.  Direct Conversion (thanks Wes!).  Discrete components.  No chips.  Analog Oscillator.  40 meters -- monoband.   

Schematic updated 29 November 2017

There it is.  You can click on the picture to make it larger. Here is an outline of the circuitry: 

-- Single tuned circuit bandpass filter preceded by a simple pot that serves as a gain control. 

-- JFET RF amp

-- Singly balanced passive mixer inspired by F5LVG's RX-20 in SPRAT 100.  For the coil I used one of the many trifilar toroids that Farhan gave me. 

-- The local oscillator is the coolest stage.  I used a 7.37 MHz ceramic resonator and a circuit inspired by Miguel PY2OHH. With a polivaricon I can tune the entire 40 meter band. I put a reduction drive int here to make tuning easier. 

-- The AF amp is an op-amp free design.  It works well into ear buds or into a computer speaker. 

-- Perhaps in an effort to catch the attention of the younger generation, I built it into an iPhone box.  

Please let me know if you spot any flaws in the circuit, or see any places where it might be improved. 

More to follow.   This prototype is now in the mail, en route to my nephew John Henry who will be testing it for me. 

China and SETI: What Happens if China Makes First Contact?

Here is a really amazing article from The Atlantic.  It is very thought provoking.  Mind blowing.  Strongly recommended. 

You can read it here: 

https://www.theatlantic.com/magazine/archive/2017/12/what-happens-if-china-makes-first-contact/544131/

Or you can listen to a reading of it (like a podcast) here: 

https://soundcloud.com/user-154380542/what-happens-if-china-makes-first-contact-the-atlantic-ross-andersen

Thanks to Mike Rainey AA1TJ for alerting us to this. 

Jeff Murray's Grumpy Audio Guy from 40 meters

I've talked to this guy several times.  He usually waits until I'm testing a new rig.  

https://www.facebook.com/6sj7jeff/videos/10208309648978285/

I'm sure Pete has worked him too.  

Amazing Homebrew/Boatanchors QSOs on 40 --Six solder melters in a row!

Al W8VR

After a day of happy tinkering with the Direct Conversion receiver I've been working on, I turned off the soldering iron and got on 40 meter SSB with my BITX Digi-Tia. 

First -- Steve W4IJ came back to my CQ.  Steve is a boatanchor enthusiast and has written for Electric Radio magazine.  FB. 

W4IJ Boatanchors

When Steve signed off, I got into a contact with Pete W8NBO.  We had spoken before and he had told me of a homebrew transmitter he'd built as a kid.  This time I asked for details: It was a 6AG7 oscillator to a 6L6 amplifier.  He ran it with an S38 (brave man!).  He described what must have been a very painful effort to hack (literally) the needed holes in the transmitter chassis using just a spike, a hammer and a file.  I told him this brought back my memories of similarly painful chassis work (mine was for a power supply for a Heath HW-32A).

At this point we were joined by Arnie, W2HDI.   Arnie's rig is in Stowe Vermont, but he was running it remote from the South of France where he and his wife were celebrating their 50th wedding anniversary.  Arnie shared with us memories of similar chassis pain -- his were related to an external modulator that he built for a DX-40. I think he said that all he had was a hole punch and a file.  Oh, the humanity! 

Then Al W8VR joined the conversation.  Al said that he's been in the game so long that his early rigs were built using cigar boxes as chassis.  I pointed to a connection:  I noted that my BITX rigs are enclosed in what could be considered cigar boxes.  Al's QRZ page picture has a magnificent AM rack rig that he said was actually built twice.  There is also an HRO-60 in the picture.  FB. Check it all out at Al's web site.  Click on the mic for the write ups, the key for the pictures.  http://www.w8vr.org/

Then Dennis K0EOO called in.  Holy Cow!   Dennis and I spoke not long ago.  You may recall my enthusiastic write up of his beautiful 1974 SSB rig: 

http://soldersmoke.blogspot.com/2017/08/k0eoo-homebrew-ssb-in-1974.html

and

http://soldersmoke.blogspot.com/2017/08/more-on-k0eoos-amazing-homebrew-ssb-rig.html

This was almost too much.  Rarely will you spontaneously come across so many hams who have melted so much solder.  FB. 

Icing on the cake:   When I returned to the bench, I fired up the DC receiver and heard Mike KN4EAR talking about his BITX40.  I switched to the Digi-Tia and gave Mike a call.  He reports making many contacts with his rig. FB. 

TRGHS. 

Beautiful QSL by Jeff Murray K1NSS

Here's a reminder of the amazing art work of Jeff Murray K1NSS. 
You can have him draw a QSL for you:   Go here:
https://www.jeffk1nss.com/hamgraphics/

Jeff writes: 

Well, I got as far as high school intermediate algebra and then I saw a squirrel.

Thank goodness others like Ken N2WWD were paying attention and went on to surf gravity's rainbow of flight dynamics, all in a day's work and play for rocket scientists. Tandem surfing and professional activities somewhat aside, Ken is also actively involved with ARISS, i.e. Amateur Radio on the International Space Station, the group guiding ham radio operations aboard ISS. So Kelvin cool to work with Ken on this New One, with Ken cooking up a special Easter Egg for all you galactic hitchhikers!

What might I draw with you?https://www.jeffk1nss.com/hamgraphics/

Jan's FB Slovakian SMD TIA Boards

Hello,

I have put up my SMD version of the TIA amplifier boards online, in case

someone wants it. The files are here:

http://janoc.rd-h.com/archives/574

and direct OSHPark order link:

https://oshpark.com/shared_projects/2V9cuV1M

73!, Jan

Peter Sripol Takes Off In His Homebrew Airplane

Termination Insensitive Amp Boards from VU3ZMV -- Eagle Files

Bill: 

Here are the eagle file data for the TIA, that I love to use as incorporated in Farhan's ubitx.

The TIA , I tried to realise two such on a double sided pcb measuring less than an inch.

 It mounts one TIA on each side.  I suppose one could simply homebrew.

It has provision for 5 pin berg (male right angle) and would be easy to plug into the main board. We may not need PTH except the connector. We can use bare pins soldering on either side.

Here are the eagle files I created.

Sarma's TIA Board

Sarma's TIA schematic

regards
Sarma

 vu3zmv

The Ham-Radio Thermatron Roots of Silicon Valley

Hack-A-Day had an excellent piece on tubes and Silicon Valley this week.  Makes me want to get the book "Secret History of Silicon Valley." 

https://hackaday.com/2017/11/02/silicon-valley-was-built-on-tubes-of-glass/ 

Note above the Klystron prototype mounted on a wooden board.   These guys clearly had THE KNACK. 

Another Source for BITX Amp Boards - AG4ZP

Thanks for sharing (the infor on the modular BITX boards). I actually had a similar idea a number of years ago and designed a small PCB for the ubiquitous BITX amplifier design. I have the project shared on OSH Park and you can get three of them shipped for $5.

The project is shared here.
73,
Ryan AG4ZP

https://oshpark.com/shared_projects/6mnfQQ6e

Cliff Stoll on Software, Snake Oil, and the Creation of Real Things

"I guess today's experimenters build things in software, without ever touching a soldering iron. The hocus pocus is inside the program.  It's cleaner this way -- nothing to burn or zap, and you don't need a voltmeter... What happened to home-brewed and breadboarded circuitry? Where's the joy of mechanics and electricity, the creation of real things?  Who are the tinkerers with a lust for electronics?"   

From "Silicon Snake Oil"  1995 by Cliff Stoll  

Modular BITX Boards

https://hackaday.io/project/20067-puzzle-radio-building-blocks

From Mike W0MNE to the BITX20 group: 

Good afternoon,

I've had a few emails regarding the modular BiTX build and I probably should clarify a few things.  First, ON6RF has posted his gerber files on the link at Hackaday.com that I originally posted - just scroll down to around the middle of page to the 'Files' section.  Since he has placed these in the public domain they are available to anyone that cares to download them.  But, because it is HIS work, I'm not comfortable forwarding the files myself.  I don't know if he follows it but I'm sure that he can keep track of how many downloads have occurred and I'm certain he would be gratified to know that his work is appreciated.  What I have offered is to make my gerber file for the motherboard available and, if I can manage it, I will post it here in the files section in the Modular BiTX folder.  I will also include the pdf files that I created for each of the module showing component placement and values.

As for acquiring the circuit boards, as I stated earlier, I use PCBWAY.com for production.  Their prices are excellent and the turn-around time is hard to beat.  The cost of the panelized pc board for me was $5.00 for 10 boards with DHL shipping costs of $22.00 for a total of $27.00.  I ordered the boards late on a Monday and DHL delivered the finished boards the following Monday morning.  Their website says boards that measure 100X100 mm or smaller cost $5.00 for 10 boards so whether you order 1 or 10, the cost is the same.  To complete the build you will need 3 boards to have enough bi-directional amp modules so, if you're interested in following thru with building a modular version, you could perhaps join with two other interested parties and split the cost between you.  With 3 boards you will be able to build a complete transceiver and have 2 extra modules for experimentation for every section except the bi-directional amps.  As an example, on my first prototype I built the double balanced mixer as designed and a second one using an ADE-1 to compare the results.  For the record, there was absolutely no noticeable difference between the two.  I also built a 4-crystal filter as designed and an 8-crystal QER filter on a second board for comparison.  There was a definite difference between these two modules.  

I hope this clears up some of the questions and I'm still available via direct email to answer questions specific to my build or class presentation.  I'm currently working on the assembly manual for my class and when finished I will post it also in the files section.
--73-- Mike  --  W0MNE

https://hackaday.io/project/20067-puzzle-radio-building-blocks

Ron Gang, 4X1MK on "QSO Today" Podcast: Knack Story, Satellites, Quads, Philosophy

Wow, Eric Guth's interview with Ron Gang 4X1MK really resonated with me: 

-- Asked about how he got is start in radio, Ron went back further than many of us do in response to this question.  He cited his early experiments with "two tin cans and a string." Yes, of course!  I'd forgotten all about it, but in retrospect this might have been a very early indication of THE KNACK.  (I'll bet many of our readers were also active on the String and Can band.) 

-- Ron used a DX-100.  FB. 

-- Ron was active on the satellites.  In his voice you can hear the joy and the burst of enthusiasm that resulted from those early satellite contacts.  He also mentions the untimely demise of Oscar 13.  Bummer. 

-- Ron was the Israel correspondent for 73 Magazine.  I held a similar position in Dominican Republic.  My friend David Cowhig was at the same time correspondent from Okinawa, Japan.  We should have a reunion of "73 Magazine Hambassadors."

-- Ron mentions John Tait EI7BA.  John was a regular contact of mine when I was in the Azores.  He appears in the SolderSmoke book.  He was the one who introduced me to an important Irish accolade:  John told me that WD-40 is "the Pope's pee." 

-- Toward the end, Ron discusses the wonder of ham radio conversations, and provides a good suggestion on how to get beyond the all-to-common "hello-59-goodbye" contacts. 

Ron's comments on the spiritual or philosophical aspects of the hobby were just the thing for a quiet Sunday morning. 

Thanks to Eric and to Ron for a great interview.   
    
Listen here: 

http://www.qsotoday.com/podcasts/4X1MK

BITX40 Featured in "Nuts and Volts"

Congratulations to Steve Jackson and to "Nuts and Volts" for putting out a very nice article on the BITX40 transceiver.   Steve did a great job in describing the origins of the BITX, and in explaining that Farhan's intent is to encourage experimentation and tinkering.  Pete and I had pitched a similar article to a major ham radio magazine  but sadly they were not interested.  Three cheers for "Nuts and Volts."  I'm thinking about subscribing. 

I know many of you will wince when you see Steve's unshielded mic cord lying right next to the front panel antenna connector, but please don't freak out about this -- in the article you will see that Steve acknowledges that the antenna connector would have been better placed on the back of the box.  That's an example of the educational value of the BITX40 -- live and learn.  Even with the connector like this, Steve was making many contacts. 

The "Nuts and Volts" website very kindly let me read the entire article without a subscription. 

Try here and click on the blue "digital edition" box: 

http://www.nutsvolts.com/magazine/article/meet-the-bitx40-a-single-sideband-transceiver

Or try going directly here:

http://nutsvolts.texterity.com/nutsvolts/201711/?folio=36&pg=36#pg36

Pete's Simple-ceiver -- Al Fresco Success

N6QW's Simple-ceiver design is being replicated far and wide.  Above you can see PA3GUP's beautiful rig in its "Al Fresco" stage of development.  For much more of this -- including a cool video of Pete's rig in action -- go to Pete's blog: http://n6qw.blogspot.com/ 

630 Meter DX from Wasilla, Alaska

Kl7L's 600m Part 5 station

Hi Bill - It's been a few years and I'm sort of glad my global wanderings have been curtailed to a point and I'm now based out of Alaska and via a couple of call signs (KL1X KL7UK etc) have ended up with KL7L. I still travel with the Oil Company but no China on the horizon.

I had a chuckle when you and Pete mentioned the new 630 and 2200m bands - and the real estate requirements - Well, I've been active with the experimental callsigns since 2003 and very glad we have finally got the bands - so a small form to fill out on the UTC web site and a 30 days wait to check you are not within 1Km radii of the co channel PLC on Trunk power lines, if no "disapprove" away we go - and I and many have! 

Just turn off all those nasty dimmers, LED lights and SMPSU wallwarts - plonk your radio on 474.2kHz USB and decode using WSPR or JT9 and I think youll be surprised on what you can hear even on a short typical 80m or topband wire or so.  There a lot of activity all around you

The station for both band is homebrew soldersmoke heaven - transverter/PA and filters/Couplers/Phase meters etc with only my ol' TS850 doing the prime driving, or a Hans  Summers U3S.

Size does matter - but my best RX for both bands is a 2ft long active probe up a pine tree, that's all - and some 300ft of RG6, and the Tx antenna is a 60ft high  Marconi or more over an inverted L with a 3 wire top cap all nested in the Birch forest - loads or radials but still very lossy in the Summer - nothing special here - Of course with the QRP per se we have to use CW or digital modes mostly but DX can be done - after all my closest active neighbor on 2200/630m is over 2000Kms away!

So, for the first time I sparked up on JT9 on 630m this early morning and first blood to QSO with VK4YB @ 5W EIRP!

 Not bad for a first qso on what is a fairly typical back yard antenna - so, there is hope and many people appear to be putting transcontinental signals out this power, so everyone is on the same playing field - just the ground and location and latitude will change things! It tends to be more flaky, lossy and geo/solar events tend to hit us hard up here compared with say Seattle.

On 2200m TX its a loop of thick wire hanging in the trees - literally 500ft circumference and a beefy coupler to deal with the 50A or so of antenna current to make the 1W ERP or so - still its getting out OK and again should be putting signals over the Pole to EU and across the Pacific as it becomes more and more dark up here.

I'm now caught up with past Soldersmoke pod casts and thanks to you and Pete for making me smile

Take care

Laurence KL7L  aka G4DMA et al
Wasilla Alaska 23rd Oct 2017