Adam N0ZIB's FB Station (and UGLY Michigan Mighty Mite)

Bill and Pete, 

Thanks for the work you put into your podcast. I’ve been listening to it on my commute and while at work (I’m a welder/fabricator). Fantastic content.  Keep up the great work.  

All your talk about Farhan and the Ubitx convinced me to order one.  I welded an aluminum case for it and upgraded to the Nextion 3.5” screen. Also added a tuning knob from a Heathkit SB-401.  So far I’m really enjoying this rig. Plan to add an audio amp (to drive a larger speaker) and a CW filter to it this weekend.  In the station picture I sent I also show my paddles made from a hacksaw blade and stainless steel hardware. It’ll send 25 WPM before it gets a little sloppy.  My QCX 40 is also pictured.  I have a commercial rig too but find I’m not using it very often. 

Plan to start building the simpleceiver soon and maybe a bitx 17 too. Your podcast played a big part in convincing me to pick up a soldering iron again.  You guys are awesome.  Keep it up.  

73’s

Adam

N0ZIB

(Pete noticed that the main tuning knob on Adam's uBITX was NOT from Heathkit but was instead from a Collins KWM-2 or 32S3.  He advised Adam that the knob would sell quickly on e-bay.  It did, and will finance additional N0ZIB homebrew projects.  We are thinking of adding these knobs to our SolderSmoke Retirement Fund Portfolio.)   

Adam continues: 

I was listening to your older podcasts and heard several discussions about the Michigan Mighty Mite.  So this jumbled up mess probably doesn’t look like much but I built one. I need to order a 40 meter crystal and actually build it again on a board(with the coil rewound for 40) but my “proof of concept” build was a success. Using a variable cap from a Hallicrafters S20-R and the crystal holder from a Heathkit.  

QCX SSB -- But How Much QCX Remains?

Hack-A-Day carried a very nice video describing recent efforts to turn Hans Summers' amazing QCX CW monoband transceiver into a multi-mode, multi-mode (including SSB) rig (see above).   This is project will greatly interest QCX and SDR fans.  

But I wondered how much of the old QCX is still there after the modification.  Not much, it turns out.  

Here is the bloc diagram of the QCX.  It is essentially a phasing rig, using the same principles as my venerable HT-37 transmitter and my version of KK7B's R2 receiver: 

Yesterday Paul VK3HN sent me the schematic of the new multi-mode, multi-band version:  

Notice how different it is.   I thought that perhaps the new rig would keep something of the I-Q circuitry of the QCX, but it does not.  This is not a criticism, just an observation.  

But here is something that harks back to a topic we've been debating on the blog and podcast.  Notice that the top diagram is a bloc diagram.  There is a lot of circuitry in most of those boxes -- lots of resistors, capacitors, inductors, and transistors.   There is a schematic diagram under that bloc diagram.  But look at the second diagram.  While it looks like one, that one is NOT a bloc diagram. That IS the schematic diagram.  Most of the circuity has been sucked into the chips.  

While many will prefer the rig described by the second diagram, I remain an HDR guy, and don't really like seeing the circuitry disappear into the ICs.  But, to each his own.  This is all for fun.  Congratulations to the guys working on the new rig. 

AJ4SN Homebrew

OM Stan AJ4SN reports that his operating position is on the left. The workbench is on the right.  FB. 

More here: https://www.qrz.com/db/AJ4SN

I like the Turner +3 Transistorized microphone. 

Thanks to Ed B. for the link. 

An Amazing Catalog of Circuits from HA5KHC

HA5KHC is a club station in Budapest, Hungary.  The photo above shows a portion of their worshop.  The link below is for their really amazing collection of links to ham radio circuits. 

http://konstruktor.ha5khc.hu/linkgyujtemeny/linkgyujtemeny.htm

Tribal Wisdom from KE3IJ

Lots of homebrew wisdom on OM Rick's web site.  Excerpts: 

----------------

Why am I not on the air as much as I'm tinkering with toy radio circuits? Well, if some of the hams reading this don't mind my saying so, the manners of many of the people using the bands these days leaves so much to be desired that I often find more pleasure in futzing around with "minimal" QRP [low-power] ham-band transmitters and receivers, as well as good-old AM broadcast receivers, than in getting on the air anymore. 

So I've found a certain twisted fascination with trying to build the simplest pieces of junk possible, and seeing what I can pick up with them. I usually start by drawing a rough schematic on paper, then tack-soldering a haywire "spider-web" of components, as a 'first pass,' and then I rebuild the circuit more neatly once its design is finalized.

It still amazes me that we can connect some modified "rocks and sticks" together (that's basically what copper wire, silicon transistors, etc. really are, when you think about it) and hear voices and music magically appear out of nowhere...

-------------

He has many regen circuits.   And his Drake 2-B dial skirt looks just like mine.  

Visit Rick's site:  http://ke3ij.com/radios.htm

Antennas, Money, and Ham Psychology

During SolderSmoke Podcast #222, Pete lamented the fact that many hams are willing to spend significant amounts of money on "manufactured" dipole antennas that are little more than pieces of wire.  Tony Fishpool G4WIF sent a graphic on the wire antenna he uses (see above).  He also shared an anecdote about G5RV antennas and G-QRP Club founder George Dobbs:  

From Tony: 

The aerial that I’ve had so much fun with, an End Fed Half Wave, cost me £8 ($9.80) for the toroid and the rest came from the junk box. The reel of wire was probably a £1  ($1.25) from a radio rally. You never pay big money for wire at a rally. People take it there to get rid of

it!

It covers 80m and all  harmonically related bands.

My garden is too small so I cheated by using some linear loading to
make it fit. (on the back fence).

WIth 5 watts CW on 40m I can hit the USA reverse beacons most mornings.

It was about £9 ($11) to make - but if you count the Spiderbeam
12m pole, it  was another £98 ($120).

I have a little George Dobbs story relating to aerials. Probably around

15-20 years ago. He was speaking at a radio club near to me so I went along to support
 him and have a beer with afterward.

He gave his usual entertaining (and always funny) talk during which he

paused - and said, as if in confidence to the audience:

“Do you know, I’ve heard, and I don’t know if it is true, that there are

people who actually pay real money for a pre-made G5RV”

I swear that it went very quiet and there may even have been the odd foot

shuffled.    Tony

---------------------------------------------------------

Coincidentally Mike, WU2D put out a VERY ILLUMINATING YouTube video on the psychological aspects of ham radio operators and their antennas.  Here it is:

Emilio's Mirror of JF1OZL's Site

JF1OZL's site was for many years a real treasure trove and source of inspiration for homebrewers around the world.  It recently disappeared from the internet.  And I find no listing for JF1OZL on QRZ.com.   I hope Kazuhiro is OK.  

Emilio in Mexico has put up a mirror site.  Thanks Emilio.  We need to protect and preserve JF1OZL's work. 

https://www.emilio.com.mx/jf10zl/

Here is a SolderSmoke blog post on Kazuhiro from 2011: 

https://soldersmoke.blogspot.com/2011/12/homebrew-hero-kazuhiro-sunamura-jf1ozl.html

Radio Art from QST December 1951

SolderSmoke Podcast #222 Antennas, Phasing, VFOs, 2-Bs, 6 years of N6QW, MAILBAG

After 46 years, finally a dial skirt

SolderSmoke Podcast #222 is available:  

http://soldersmoke.com/soldersmoke222.mp3

No travelogue but… SolderSmoke Almanac!

Memorial Day in U.S.

End of Ramadan so Eid Mubarak! 

#222 marks SIX YEARS of Julian-ismo.  He started on SS 161.  Thanks Pete. 

Thanks to all who sent good wishes on Billy's graduation.  He heads to Boston and the lab in a week or so.  Very proud. 

------------------------------------------

Bill was on Ham Radio WorkBench Podcast  

 ----------------------------------------- 

PETE'S WORKBENCH

-- Antenna Ideas -- Don't Buy that $165 dollar dipole!  It is just wire!   

-- THE PHASING RIG. Does this point to a need for meditation?  Or at least some temporary disengagement? Tribal wisdom from Pete. 

-- DEAN KK4DAS's rig.  The Furlough 40.  Troubleshoot.  Tribal knowledge. 

-------------------------------------------

-- SHAMELESS COMMERCE DIVISION:   AMAZON BOX -- SEARCH FOR ANYTHING OU WANT THERE.  

-- PLEASE PUT COMMENTS ON THE SOLDERSMOKE BLOG POSTS. 

-- PLEASE CHECK OUT THE SolderSmoke YOUTUBE VIDEOS. 

------------------------------------------

BILL's WORKBENCH

n  Shortwave dials and exotic locations.  Java!  

n  Galaxy V VFO Project. Series-tuned Colpitts.  

n  DRAKE 2-B.  Hayseed Recap. Put the skirt back on the old rig.  Reduction drives?   

SHOPPING BAG: 

I got a replacement for the Xtronics 4000 soldering station.  Yaogong worked! 

https://www.amazon.com/gp/product/B078WB9Z2R/ref=ppx_yo_dt_b_asin_title_o02_s01?ie=UTF8&psc=1  

Ordered screws and stuff from McMaster -- Came very fast! 

Working on a resistor kit from Mouser. 

MAILBAG: 

VK2BLQ's Phasing RX with an HRO dial.  Cool Retro.  

Adam N0ZIB -- Cool station.  TFT screen Aluminum welded box. FB. 

Karl G7AFT    BITX 40 doing USB and LSB by changing the VFO freq.  Pete's trick! 

Jerry KI4IO  out in nearby Warrenton.   Hope to be able to meet up soon. 

Keith N6ORS's Hot Mustard Phasing Board. 

Mike N5GTF'd FULLY INDOOR Quarantine Receiver.  Need a slogan for the antenna!

Nick M0NTV's Bread Bin 80 Quarantine rig

Bruce KC1FSZ   Quarantine 10 -- Brave man in solar minimum. But I hear 10 is opening.

Talking to Grayson Evans KJ7UM  TA2ZGE about Collins 9.9 MHz transformers.

Talking to Alan Wolke W2AEW about Drake 2-B stuff  Was there a reduction drive?

Paul VK3HN about Ceramic filter spurs.

Peter VK2EMU notes no animals were harmed in the making of my videos.  But many electrons were agitated. 

N6QW Phase Shift Success -- It aint over 'till the fat lady sings

I,Q, and HRO: VK2BLQ's Phasing Receiver with an HRO Dial

I had occasionally fantasized about connecting Armand's HRO dial to the rotary encoder of an Si5351, but I think this was more of a nightmare than a fantasy.   I don't think Stephen VK2BLQ went this far -- I suspect that his HRO dial was connected to an analog VFO.  But still, the combination of HRO with I&Q seems a bit edgy...  FB Stephen.  Please send us more info on this amazing receiver. 

  

Hi Bill,

Hope you are safe there with the bad weather.

Recently you  mentioned HRO dials and the need to build a radio around one and Pete has been discussing phasing SSB; attached photo is a phasing receiver on 80 and 40 m, a combination of both HRO and IQ that I built many years ago, and thanks to Pete I shall get it running again.

And Bill, like you I am from the IGY of 1958 and retired with more free time on my hands.

Best regards to you and your family, especially young Billy.

Stephen,

VK2BLQ