Tuesday, November 17, 2026

CuriousMarc Links an HP Nixie Counter and an HP Thermal Printer and Uses a FNRISI Scope/Multimeter


As with many of the CuriousMarc videos, much of what he was doing was over my head, but as always it was still intereresting to watch.  This video was a good reminder of how even 60 year-old digital circuitry is just much more complicated than the anaog circuits we usually work with.   

It was also a good reminder to see him find errors in the old HP documentation, then correct the errors after 60 years.  These kind of errors happen.  It is difficult to find a copy editor who will spot ordinary grammatical errors.  It would be IMPOSSIBLE to find one that could spot these kind of wiring/logic errors.  Could AI do this better? 

Marc's use of the FNRISI scope/multimeter was great. I have one in the Dominican Republic.  The 'scope  may be better for the lower frequency digital stuff that Marc was working on.  The sig gen seemed useful (but a bit off in frequency).  In general, I found the FNRISI to have too much instrumentation shoved into one small box.  I had to keep reminding myself how to switch between functions. 

Again, I found myself wincing when Marc would grab energized instruments with BOTH HANDS.  At several points one of his hands was resting on the WARNING HIGH VOLTAGE sticker on the power transformer.  One hand behind your back OM.

Thanks Marc!  Your curiosity is infectious!    

1 comment:

  1. Keeping the Classic HP Instruments are worth their maintenance and repair. They may be larger, heavier and maybe a little less capable than present-day instruments, but they will work long into the future. Our present-day stuff will be in landfills by then.

    ReplyDelete