Podcasting since August 2005! Listen to our latest podcast here:

Podcasting since August 2005! Listen to Latest SolderSmoke

Friday, August 28, 2009

Sonya had The Knack

Stewart, G3YSX, sent us an article that he wrote some time ago for the Crawley ARC. Thanks Stewart. (This is an abridged version of the article. ) Very interesting:

Sonya
Sonya is the code name of Ruth Werner ne Kuczynski 1907 - 2000. Sonja is of interest here because her role in the GRU was as a clandestine radio operator. In her autobiography “Sonya’s Report” she gives a little insight into her work.

Trained in Moscow in the early 1930’s Soviet radio operators had to learn to build their own transmitters on site, using available materials. In rural China she and her accomplice (whom she lived with as husband and wife) set about building their first transmitter using receiver parts. There is an interesting story of how she had her real husband ship the transformer (a heavy 8 inch cube) up from Shanghai in the seat of a chair. Under the stresses of travel this nearly split from the chair which might have terminated her career as a clandestine radio operator before it started. This was the first of many incidents in which only luck prevented discovery of her activities.

Their first transmitter was a “three point” Hartley set, much improved by studying an amateur radio handbook of the time. It is not clear whether this was an oscillator, buffer, PA, whether she meant a Hartley transmitter that used three valves in parallel, perhaps that it was a single stage transmitter, with a two stage receiver in the classic paraset fashion. On the other hand it is known that she had a domestic set and it was not uncommon of them to be shortwave capable at that time. Building and setting up the transmitter must have been something of a challenge because she would not have had access to test equipment. In particular she implies that the transmitter was VFO controlled (presumably crystals were fragile and a security risk, both when making a boarded crossing and being on a fixed frequency). Under these circumstances getting setting set up on frequency must have been really difficult. I would imagine that this must have required her to find a reference frequency sent by control, net her transmitter and then send. Not easy with a power oscillator design and a receive that would be pulled by such a strong signal. The set had to be hidden when not in use. The Morse key was improvised out of a Chinese paperweight (actually a type of steel ruler) and a bolt and was dismantled during the day.

Antennas were not so much a problem because large outside receiving antennas were common. Ruth talks about asking permission from her landlord in Oxford to put up her antenna and receiving help from her unsuspecting host. From here text it seems that antennas were mostly long wires, although she talks about a “Fuch’s” antenna, a type that I am not familiar with.

In one house (in Warsaw I think) she started transmitting and this immediately blew the fuse for the house. She then had to quickly dismantle and hide the apparatus in the dark, lest her rented room be searched looking for the cause of the fault. In another apartment in Switzerland she had to close down and move sites (suddenly move house) because of EMC problems. Luckily (for her) one of her neighbours commented to Ruth that her husband (a Nazi) was sure that someone was operating a transmitter nearby which was causing interference to their radio receiver, and that he would organize a search later that week when he returned from a trip.

Ruth notes in passing that the absence of amateur radio traffic during the war was a problem because Soviet operators used to use it as a cover for their clandestine activities. It is not clear whether she was operating in the amateur bands giving the authorities too many Morse signals to monitor (unlikely because the non-amateur nature of the traffic would have been observed and reported by the radio amateurs), whether she was posing as a radio ham (again unlikely because of the tight regulation) or more likely, in my view, using our activities as a cover for both EMC problems and - to the unskilled – for strong local morse received on the shortwave bands.

In 1937 whilst operating out of Warsaw, Ruth talks of one evening when after setting up the transmitter, she caught here hand across the HT (two 120v batteries in series). She could not remove her hand without the help of an accomplice, by which time it was painfully burnt. She then got a hard time from her controller for failing to get a 50 group message out that night through extreme QRN. It later out that there had been a major solar even that night which had disrupted all radio communications. However she appears to have been working for the sort of organization that trucked no excuse, not even acts of
God.

Ruth would typically transmit at night between two and four times a week. Messages were 60 to 500 groups. Assuming 20 WPM with perhaps 30% time allocated to repeats and other procedure transmissions would have taken at least 45 minutes. In practice however, due to the difficulty of copying, transmissions often took half the night. It is therefore very surprising that she was never caught. In particular, given the hard time that the GPO gave the amateur radio community during the late 1940’s when she was handling the Fuch’s traffic, it would be very interesting to know why they never found her station in rural Oxford.

Ruth’s autobiography, which is out of print, but available from East Sussex libraries, unfortunately lacks much of the detail that one would have expected from a western text written so long after the event. This is undoubtedly a result of the excessive secrecy intrinsic to the other side of the Iron curtain even so long after the events, and which was maintained despite the obvious duplicity of her employers. This is a pity, because it would have interesting but harmless after all these years to have read more technical detail about both the transmitters and the operating procedure used by these agents.

Stewart G3YSX

Thursday, August 27, 2009

WANTED: MEPT Grabbers in S. America, Africa, Asia

Dear Bill,

It Hurts!!.... You have abandoned us visual Beacon Anarchists for the Instant gratification of the WSPR crowd.

Hey, To refresh your memory, Your the one that got me started in this Visual MEPT World. I listened to your podcast and ordered some 10.140 Mhz Crystals and built my Model 1 MEPT transmitter. After that I was hooked. It has gone on to a model 2 and Now started on a DDS driven Model 3 which is all band and right now is crying out for someone to see it at 160 mW. It has made it last week to VK7ZL in Tasmania 8455 miles and ZL2IK in New Zealand 6917 miles. So, as you can see, I have been busy. One of the really extarodinary things is that we are doing this on 40 meters at 7,104,800 Hz. What would really help is to enlist some more monitoring stations with ARGO Spectrum Analyzers on their computers LISTENING. They are sorely needed in South America, Africa, India and the Far East. I have the belief that my signal at 160mW on 7,104,800Hz can be copied in all of those areas at different times of the day, almost every day. The reason it isn't is there is nobody listening and my little FSKCW signal
just keeps looking for a receiver to hear it.

My model 3 transmitter is a thing of beauty. It can work all bands from 160 to 10 meters. It is completely under the control of an Ardunio processor (A great product of Italy). It controls the frequency, the amount of frequency shift, and the CW keying. It is not quite ready for prime time yet. But work is being done on the controlling software and one of these days, It will be done. Then the visual guys will not be chained by a crystal to determine their frequency. They will merely command their Ardunio to control their Direct Digital Synthesizer to the desired frequency, select the desired mode of transmission and hook up the antenna.

So, Please Mr Bill, Don't abandon us visual MEPT beacon guys. We really need your voice and talents to keep the airways of our 100 Hz of spectrum alive and vibrant. You could hang an extra wire out the window and do both!

73 Dave
David R. Hassall WA5DJJ
Website: http://www.zianet.com/dhassall/

Wednesday, August 26, 2009

G4KKI to Poldhu Marconi Site

Bill, G4KKI, recently visited the Marconi site at Poldhu, Cornwall. He took with him the book "Thunderstruck" by Eric Larsen. (He also took along SolderSmoke -- The Book). He has a nice slide show of the visit posted on his blog. Check it out:

http://g4kkibill.blogspot.com/

Homebrew Hero: Sir Douglas Hall


Sir Douglas Hall is one of my homebrew heroes. When he passed away in 2004, a picture similar to the one above appeared next to his obit in several of the UK newspapers. I clipped that picture and taped it into my log book.

Here's a great web site with Sir Douglas's articles:

http://www.spontaflex.free-online.co.uk/

The intro from an old article by Sir Douglas in the in the UK magazine "The Radio Constructor":
The writer lives in Northern Rhodesia and his nearest neighbors are 25 miles away. The nearest town, cinema, doctor and electric light mains are 77 miles away by a road that is not always passable. Wireless is therefore supremely important but there are several problems in the design of a receiver suitable for these conditions. It must be very sensitive to provide reliable reception from Daventry (a transmitter site in the UK) under all conditions. And it must be very economical owing to the high cost of batteries in these parts. ------------------------------------------------------------
From "The Telegraph" (UK)

Sir Douglas Hall, 14th Bt, who has died aged 95, ended a full career in the Colonial Service as the last Governor of the Somaliland Protectorate; previously, he had for almost 30 years served in Northern Rhodesia (now Zambia).

Hall's governorship of Somaliland was short. He was appointed with effect from July 11 1959; less than a year later, he and his wife flew out of the territory a few hours prior to the ceremony, on June 26 1960, that concluded the transfer of power to the new self-governing authority.

The time-scale had been set by the approaching end, after a 10-year period, of the Italian stewardship of the UN Trusteeship of Somalia to the south. If the Somalis of the Protectorate were to unite with their neighbours at the time of the independence of Somalia on July 1, the June 26 date had to be met.

Yet there was nothing over-hasty about Hall's management of the transition. Iain Macleod, then Secretary of State for the Colonies, wrote to him afterwards praising his "speedy command of the confidence of the people enabling the final transfer of power to take place so smoothly and yet so rapidly".

It was not only a grateful Colonial Secretary who voiced his appreciation. Mohamed Ibrahim Egal, the new country's first prime minister, wrote to Hall more than 30 years later recalling "the quiet, always helpful counsel you gave me at that momentous turning point in Somaliland's destiny".

Douglas Basil Hall was born on February 1 1909 (his eldest brother's 11th birthday), the third son of Captain Lionel Hall, an officer in the 4th South Staffordshire Regiment. The baronetcy, of Nova Scotia, was created for John Hall, of Dunglass, in 1687.

From Radley, Douglas Hall went up to Keble College, Oxford, and then in 1930 joined the Colonial Administrative Service. He soon found himself one of 12 cadets - "all bursting with energy," he remembered - bound for Northern Rhodesia, which until 1924 had been administered by the British South Africa Company. The group of cadets - including "three Varsity Blues, two oarsmen, one amateur pilot, one hunter, and a wireless enthusiast [Hall] who later developed into an expert in that field" - made the long sea voyage to Cape Town, and then the rail journey up to Livingstone on the Zambezi.

In those days, there were still people living in the territory who had actually known David Livingstone. In other ways, too, it was a world away from today: one of Hall's colleagues, for instance, had a private income sufficiently large for him never to bother about cashing his pay cheques.

Hall became a District Officer in 1932, and for the next 18 years worked sure-footedly within that colonial administrative culture that sought to balance a maximum of respect for local custom and practice - and, indeed, structures of power - with British notions of justice and development.

He proved as adept in remote bush stations as in such urban postings as Kitwe, where the development of the copper mines was bringing with it new forms of labour relations and new challenges in maintaining the trust of the local people. Here Hall won an early reputation for skilful diplomacy.

It was, though, life in the bush that he enjoyed the most, in particular going on tour. A District Officer was expected to maintain personal contact with the peoples of his district and this meant getting out, often on foot and for long periods of time, to tour the villages and settlements. Whenever possible, Hall was accompanied by his wife Rachel, who joined him in Africa in 1933, and by their young children. From time to time, the family also stayed with the Gore Brownes, whose house, Shiwa Ngandu, has since been immortalised in Christina Lamb's book Africa House.

Colleagues viewed Hall as a commanding figure, fair, respected and likeable. In his book African Sunset, Robin Short wrote that Hall "was the ideal to all of us of what a District Officer should be. In appearance distinguished, his manner was exactly the same to junior clerks as to senior officers, always equable and courteous. Always he seemed in complete control of every aspect of the work, of every corner of the Province."

Hall was promoted Senior District Officer in 1950, and in 1952 became the first Officer-in-Charge of the North-Western Province, which had been created in consequence of a report that Hall himself had produced. He was promoted Provincial Commissioner in 1953 and Administrative Secretary in 1954.

He was then Secretary for Native Affairs to the Government of Northern Rhodesia from 1956 to 1959 (Acting Secretary, 1958), working in the central administration in Lusaka. He proved an able speaker in the Legislative Council and later an important contributor within the Executive Council.

Although only 50, Hall was on the point of retirement when he was invited to go to Somaliland. He accepted - having (with some pride) wrung an exceptional agreement from the Colonial Office that he could draw his pension while earning his governor's salary, provided he did not build up a second pension.

Professing neither modernism nor tradition, Hall always did what he believed appropriate for the time, the place and the people. When it became difficult for the Somaliland Scouts to provide him with an ADC for all occasions, he appointed his personal assistant, now Betty Thom, to the role. A woman ADC without military rank was a rarity in those days, though as far as Hall was concerned he was simply making sensible use of a capable person.

On leaving Somaliland, Hall was still only 51. But he and his wife decided to settle at Ringmore, in Devon. He became a magistrate and then chairman of the Kingsbridge bench, and was a member of the Devon and Cornwall Police Authority from 1971 to 1979. He also took the opportunity to spend much more time on an interest that had begun when he was a schoolboy of 15: the design and making of wirelesses.

The design principle of these was of great interest to other enthusiasts. More than 100 articles, with circuit diagrams, construction advice and commentary on the electronic design principle, were published in the magazines Radio Constructor and Radio Bygones between 1964 and 1999. There is now a website called "The Ingenious Circuits of Sir Douglas Hall".

He could as easily have occupied himself re-designing cars, for which his enthusiasm was almost as great. He was life president of the Trojan Club, and for years a familiar figure driving around Devon in his open-top 1937 Bentley.

He was appointed CMG in 1958, and KCMG in 1959. He succeeded his brother in the baronetcy in 1978.

He married, in 1933, Rachel Marion Gartside-Tippinge, who died in 1990. Latterly, Hall, who died on April 8, moved to live near a daughter in Derbyshire. He is survived by a son - John Hall, who was born in 1945 and succeeds in the baronetcy - and two daughters; another son died in infancy.

Monday, August 17, 2009

Pico-Sats, Texas, Dubai, Balloons



Our man in Dubai, Ron Sparks, AG5RS, sent in this very interesting report on the very small satellites. Obviously lots of QRP relevance here:

Hi Bill,

I am attaching some news you may find interesting. If you remember last year I did an echolink => IRLP => 2m linkup to make QSLs on the Balloon Launch (BLT-24). Besides the usual repeater and video gear, we also had an interesting "hitchhiker" on the payload.

It was the functional engineering model of the BEVO-1 picosat. You can see pictures of the model and the balloon payload here:

http://www.w5acm.net/b24.html

This unit sent beacon information during the balloon launch and we tested it environmentally by doing so. Data on the sat itself is at:

http://www.utexas.edu/news/2009/06/09/picosatellite/

A sister satellite was being prepared by my alma mater, Texas A&M, who then docked their sat with the UT sat and put them on the Shuttle mission STS-127. Photos are here:

http://www.ne.jp/asahi/hamradio/je9pel/dragonst.htm

All of this is part of NASAs DRAGONsat program. This is a new GPS system being developed by NASA.

I know that the satellite stuff is a little "far afield" for Soldersmoke, but you might find the connection to the Houston balloon community interesting. Those of us who get together and annually launch the balloon are without question Soldersmoke-ers with chronic cases of "the knack". It is fun for me to see that actually be useful toward a next generation replacement for GPS satellites.

All the best.
73 from Dubai, Ron AG5RS and A65BQ

Sunday, August 16, 2009

Back to WSPRing

Mark, K6HX, and Roger, G3XBM, are responsible for me going back to WSPR mode. Both have been blogging about the fun they are having with this mode. It was too hot in Rome to go out this afternoon, so, after a morning visit to the Trastevere flea market (where I got a US Robotics dial-up modem for my soon-to-be functional Satellite Pro computer (thanks Jeff!), I ensconced myself in the shack, and did the changeover from visual MEPT to WSPR. This mode provides instant gratification: almost immediately I was being picked up and reported by EI7GL.

Thursday, August 13, 2009

SolderSmoke (The Book) Reaches the Oregon Coast

Wes, W7ZOI, took the book with him on vacation and sent along this shot from the Oregon coast. I told Wes that I was really nervous when I saw his e-mail in my in-box. The book has sections about my "understandings" of various aspects of electronic theory. I worried that the e-mail would reveal that these were all "MIS-understandings." I was very relieved that wasn't the case! Wes provided an interesting bit of ham radio history/trivia: Around page 169, I have the iconic picture of Wes out in the winter woods somewhere, with a homebrew QRP rig in his hands. I remember seeing this picture as a kid. I found it inspirational: a stoic homebrewer, using his invention to communicate from out in the hostile wilderness. In his e-mail, Wes tells me that in that photo, he was actually in contact with another station. It was Lionel, VE6WG, up near Calgary. This photo was taken by K7IUN. Thanks Wes!

Wednesday, August 12, 2009

VE7NSD: The Knack, personified

We've occasionally provided photos that seem to capture the essence of "The Knack." Here is another one. This is Stephen, VE7NSD, operating from his trailer out in the wilds of British Columbia. I found Stephen's story to be really inspirational. His first receiver was a Gillette Blue Blade! His first QSO was with Beaverton, Oregon! He took typing in 9th grade (the only boy in the class!) so that he could copy CW faster. Here is an excerpt from his QRZ.com page:

I started playing with radios in Roseburg, Oregon when I was ten. My Dad’s prospecting buddy Cliff, had been a Radioman in the USN and turned me on to building a crystal set using a Gillette Blue Blade for the detector. I built it but had no headphones and ordered some from the Allied Radio catalog. I felt like it took about 6 years for them to arrive, but it was probably more like 6 weeks. When the headphones finally came the xtal set didn’t work and so I started learning troubleshooting. Eventually, it worked fine and I experimented with a hunk of galena my Dad had in his rock collection.

From there Cliff gave me circuits for regenerative receivers and I built a few but none of them ever produced a usable output. All of my SWL listening had to be on the big console radio in our living room.

I can’t remember how I came to have an Arc 5 receiver for 80M, but that was my first real radio. It was probably a gift as I had no money except what I got from my paper route and all of that went to pay for the bike I used to deliver the papers. I started going to local ham club meetings and Bob Reese, W7TUI, became my mentor.

I read a copy of How To Become a Radio Amateur and started collecting parts to build the single 6V6 transmitter on the orange crate slat chassis. All of my parts had to be scrounged from the radios, TV’s and other electronic gear that was given to me. I built the power supply on a home bent chassis. I got it to work on out-of-band xtals but it had a mean chirp. W7TUI showed me how to add a VR to the power supply to feed the screen grid in the 6V6 and that cleaned up the chirp.

I was licensed as WN7VTZ in 1952 at age 12. My first QSO was with Beaverton, Oregon, with less than 10 watts input and feeding a random wire with no ATU. I suspect that there wasn’t much radiated power from that lash-up. Another buddy in Roseburg was licensed at the same time I was and we contented ourselves with cross-town QSOs.

I was the only boy in my grade 9 typing class. But, I was glad I learned to type. I could copy CW quite fast, much faster than I could write. The first time I sat down to my typewriter, put on the headphones, and put my fingers on the keys it was like magic. When my ear heard a di dah, my left little finger pushed a key. Di dah dah dah and my right index finger pushed a key. I could just sit there and watch the message appear on the typewriter paper. No effort required!

Read the full story on his QRZ.com page: http://www.qrz.com/detail/VE7NSD

And check out his Wilderness Workbench site (complete with a real moose skin):

http://www.qrpedia.com/book/200812/wilderness-workbench-ve7nsd

Sunday, August 9, 2009

SolderSmoke Podcast 113



http://www.soldersmoke.com
August 9, 2009
The Ponticelli Astronomical Observatory and QRP Station
Mystery Sound -- Can you ID?
Even Farhan Fries Transistors
Google marks Tesla's birthday
Adventures with Google Ads
Spotting the Space Station from Rome (and from London)
Arthur C. Clarke's version of MAILBAG
Mystery beeps in SS111?
MAILBAG

Space Hackers Video: IT'S BACK!!!!!

Hope this one doesn't get taken down. Great stuff from Turin, back in the day!

http://www.ch73.net/player.php?id=347&table=1&ln=nl

Tom's Receiver with Hybrid Cascode IF



I really like Tom's videos (and the receivers that are in them). Thanks Tom!

Thursday, August 6, 2009

Micro-watt WSPRing by Gene, W3PM

Hi Bill,

As you know by your experience using 20 milliwatts, Weak Signal Propagation Reporting (WSPR) is an excellent mode to experiment with low power. A QRPp experimenter can received near instantaneous automated reports over the internet from hundreds of stations throughout the globe.

During the last few days, I have been experimenting on 30 meters with output powers as low as 20 microwatts. No one has spotted my 0.00002 watt signal yet, but K8CXM has spotted my 50 microwatt signal at a distance of 553 KM at 2332UTC, 05 AUG 09.

I used a 100 mW GPS timed beacon with a step attenuator to an indoor doublet for all the tests. All equipment is homebrew and the output power is verified with a HP-432A Power Meter. If you look in the WSPR on-line database the power is reported as 0.100 watt because it was too difficult to pull out and reprogram the beacon’s PIC controller chip for each change of power. In any case, there are no provisions to report power levels below 1 milliwatt to the WSPR database.

Other noteworthy spots:
100 uW - K8CXM, 2252UTC, 05 AUG 09, 553 KM
200 uW - AI4SA, 0530 UTC, 02 AUG 09, 333 KM
500 uW - NJ0U, multiple spots 31 JUL & 01 AUG 09, 716 KM
500 uW - K1JT, 1440 UTC, 31 JUL 09, 1215 KM
500 uW - W3HH, 1240 UTC, 31 JUL 09, 764 KM
5 mW - VK6DI, 2232 UTC, 05 DEC 08, 17,858 KM

A 6.5 meter auto tuned vertical with 50 ground radials was used for the VK6DI report. The vertical is disguised as a birdhouse support because I live in an antenna restricted neighborhood.

Of course all the credit goes to the receiving stations that no doubt live in a very quiet RF environment. The reports do not represent any records, but they may be of interest to other QRPp experimenters. .

Gene W3PM

Tuesday, August 4, 2009

Sabina QRP Station and Astronomical Observatory

This year, in an effort to get the kids out of Rome, we rented a summer house out in the Sabine Hills, a beautiful area just one hour north of the city. The picture shows a typical scene from the region. I brought out my HW-8, a gel-cell battery, my VW solar panel, the pi-network antenna tuner I picked up at the Trastevere flea market last winter, and about 50 feet of AC zip cord. I threw the wire into a tree and was able to tune up on 20 and 40. First station worked was near Catania, in Sicily (close to where we stayed last month). Also worked Germany and Bulgaria. I hope to use one of the tall Roman pines (like the one in the picture above) to support a vertical wire.

I also have my telescope out at the summer place, and we used it last weekend to look at Jupiter. I couldn't see the recently discovered scar, but we got great views of the clouds, and the four Galilean moons. More to follow...

Saturday, August 1, 2009

Chuck Penson -- Heathkits, Nukes, and QRP

Back in my days as an anchor-ologist (a fan of old, heavy "Boatanchors" radios), I frequently consulted Chuck Penson's wonderful book about Heathkits. I was glad to see that he has developed an interest in QRP and is going to speak at CactusCon. Here is what the AZ Scorpion web site had to say about Chuck:

Chuck has a background in industrial archeology and a passion of the history of science and technology, with a special interest in nuclear weapons. He recently retired from the University of Arizona and now spends his time as the historian for the Titan Missile Museum in Green Valley Arizona.
He is the author of two books: "Heathkit--A Guide to the Amateur Radio Products" and more recenty "The Titan II Handbook: A Civilian's Guide to the Most Powerful ICBM America Ever Built."

Penson has been a ham radio operator since 1966 and currently holds an advanced class license. His other interests include renewable energy, astronomy, hiking and pizza. He lives with his wife, Kathryn, at their off-the-grid ranch in the desert west of Tucson.

Friday, July 31, 2009

Arizona Scorpions and CactusCon

A message to QRP-L from Paul Harden, NA5N about this event almost had me seeking flight reservations. It really sounds great. Wish I could go. But wait! A virtual visit is possible, because they plan on providing live video streams of the presentations. And last year's talks are also available. Go Scorpions! Check it out:
http://www.azscqrpions.org/CactusCon2009.htm

Wednesday, July 29, 2009

Shep: UHF and Deep Space Communications

On this one, it takes a while for Shep to get to the radio stuff, but it is worth the wait. Or you could fast forward to around the half-way point (but in doing so you will miss the commercial for Miller High-Life, and Shep's discussions of Monolopy and the Game of Love).

http://ia310115.us.archive.org/2/items/JeanShepherd1965Pt1/1965_04_15_Radio_Signals.mp3

Monday, July 27, 2009

Shep: CW, Conrad, Lake Erie Swing, QRP ops (2 Watts on 20)


April 13, 1965. Jean Shepherd discusses Morse Code, propagation, the Signal Corps and a QRP adventure on 20 Meters. You guys will love this one. Thanks to Bob, N1BE for sending this along. More tomorrow.

http://ia310114.us.archive.org/2/items/JeanShepherd1965Pt1/1965_04_13_Code_School.mp3

SolderSmoke 112

http://www.soldersmoke.com/soldersmoke112.mp3
July 26, 2009
Jean Shepherd comments on solder smoke
Back to Sicily
Apollo 11
Hans Summers' Heroic Homebrew Grenadian QRSS Adventure
Regen progress (they ARE possessed)
Knack-related maladies
Amateur astronomer discovers scar on Jupiter
A reading from SolderSmoke (the book)
MAILBAG

Sunday, July 26, 2009

Smoke on the way

SS 112 has been recorded. I'm out in the Sabine Hills right now but
should be able to upload around 2000 UTC tonight.

Saturday, July 25, 2009

Homebrew Telescope Finds Earth-sized Scar on Jupiter

Wow! Amateur astronomer Anthony Wesley in Australia was the first one to see this new scar on Jupiter. Reminds me of the Shoemaker-Levy 9 comet impact back in 1994. I saw the results of that strike direct from my front yard in the Dominican Republic using a Tasco 4 inch reflector. (The story of that adventure is in the book, "SolderSmoke -- A Global Adventure in Radio Electronics.") Exciting stuff!

Icing on the cake: The discovery was made with a HOMBREW telescope! Here is the web page of the fellow who made the discovery:
http://jupiter.samba.org/
I really enjoyed reading his account of the discovery.

Here is a news article about the event:
http://www.cnn.com/2009/TECH/space/07/24/hubble.jupiter.scar/index.html

Wednesday, July 22, 2009

Apollo 11

I was 10 years-old and totally involved with the mission. Armstrong
was my hero. I kept a scrapbook (still have it). There is an
interesting Italian angle: Collins was born in Rome. His dad was with
the US Embassy. Glad to see Buzz is doing well. There is a great story
in the book Moondust about his dealings with an obnoxious reporter. I
think Buzz handled it perfectly.

Sunday, July 19, 2009

No Smoke Today

I'm away from Rome this Sunday morning. We are back in Sicily. I can't
generate a podcast on this Blackberry!I hope to get the next
SolderSmoke out next Sunday. 73 from sunny Sicily. Bill

Sunday, July 12, 2009

Taming the Beast: Progress on the One FET Regen Rig

I went back to work on the ET-1R, my relay-based version of the single FET transceiver (check the index on the left under Minimalist Radio for more on this). The contest this weekend (was it CQ WW DX?) gave me plenty of signals to tweak the receiver with. I finally got the RX in the right freq range, and I have a nice banset/bandspread arrangement with two variable caps. I attacked the dreaded hand capacity issue via the use of non-conducting attachments to the capacitor shafts (one is the cap from a pen, the other is a piece of wood from a clothes pin).

The slaughter of innocent MPF-102s has ended (some victims are visible on top of the SPRAT). The culprit was NOT voltage spikes from the relay coil (although that might have contributed). Instead, what was happening was that I had the gate voltage set way too high on the transmit side. Whenever I powered up the rig, it was for an instant in the transmit mode (before the relay kicked in). The high voltage jolt on the gate was enough to kill the FET.

You can see the transmitter tucked in behind the relay. It moves my SWR meter on key down, so I'm confident I can get at least one QSO (perhaps across Rome) with this rig. Then, I intend to retire it. It will probably be a few years before I forget the pain and decide to build another minimalist regen rig.

Saturday, July 11, 2009

Into Space (almost) with the Basic Stamp








L. Paul Verhage has been a leader in the edge-of-space balloon game for a long time now. This morning, Hack-A-Day led me to a site that has an on-line version of his book, and a collection of his balloon and Basic Stamp articles for Nuts-and-Volts. Inspirational stuff.

Here it is: http://www.parallax.com/tabid/567/Default.aspx

Friday, July 10, 2009

Clayton's Cool Solar QRSS Rig, WA5DJJ, TESLA!

Clayton (who is NOT crazy) has put together a really neat solar-powered QRSS rig with the two wires for the dipole antenna sticking out the ends of the transmitter box. During the testing phase he went the extra mile by first freezing the circuit into a block of ice and then heating it up in an oven. I guess he really wanted a wide range of temperature data! Clayton's web site on the project is very interesting and very well done. Check it out:
http://clayton.isnotcrazy.com/mept_v1

In other QRSS news, David, WA5DJJ, just back from vacation, fired up his QRSS rig only to discover that there are no grabbers on in North America. What's up with that? Can someone out there help out OM DJJ?

Did you guys see that Google is today marking Tesla's birthday. Clearly there are some Knack vicitms in the Google-plex.

Thursday, July 9, 2009

The End of Field Day... and SDR

Deon, K6WH ZS1ACP has been having a great time with Software Defined Radios and stealth vertical antennas in San Diego. His blog site has this great shot of what the band (was it 40?) looked like at the moment that Field Day ended. Check out Deon's blog:
http://capesafari.com/hamradio/SDR/SoftRockLite.html

Wednesday, July 8, 2009

World Moonbounce Day

I was thinking that if you have World Moonbounce Day marked on your calendar, you probably have The Knack.

The picture above is of a dish in Tasmania.
Check out the article in Wired about this very interesting event:
http://www.wired.com/wiredscience/2009/06/moonbounce/

Tuesday, July 7, 2009

Nice Video on 40 Meter Receiver Project



Tom, AK2B, put up a nice video about a 40 meter receiver that he made from the small circuit boards that Diz sells at PartsAndKits.com. Also, you will see KD1JV's digital dial and the New England QRP club's NEScaf. Nice work guys!

Monday, July 6, 2009

Links from #111: W7ZOI, VU3ICQ, AA1TJ

Here is the excellent discussion of bi-directional amps I mentioned. From the web site of W7ZOI:
http://w7zoi.net/Bidirectional%20Matched%20Amplifier.pdf

Here is Farhan's new JBOT 5 watt final amplifier:
http://www.phonestack.com/farhan/jbot.html

Here is the mysterious (and perhaps diabolical) Xtaflex from AA1TJ (the first rig EVER to promise "buns of steel.")
http://mjrainey.googlepages.com/xtaflex

Sunday, July 5, 2009

SolderSmoke Podcast #111

Lunchtime on Ponza (with Palmarola Island in the background)

http://www.soldersmoke.com

In SolderSmoke 111:

July 5, 2009
Ponza and the Pontine Islands
The Xtal Set Society -- Great guys!
Spark plugs as lightning arresters
The Grundig Mini 300 SW receiver
Jupiter from Rome and from Mars
Saturn from the window
More tremors
Back to visual MEPT
Is my antenna down, or is it conditions?
W7ZOI on bidirectional amps
Farhan's simple "JBOT" 5W BJT amp
AA1TJ's Xtaflex
Regens from hell
WD-40
Sprat 139
Arthur C. Clarke's "Voices from the Sky"
MAILBAG

Check out the new book "SolderSmoke -- A Global Adventure in Radio Electronics. " Read the first chapter here:
http://www.lulu. com/content/ paperback- book/soldersmoke /6743576

Saturday, July 4, 2009

The Pontine Islands

We were out on Ponza island this week. Amazing place. Part of the Pontine Island group. Brave Ulysses was an earlier visitor. Roman emperors used it as a summer place. It is only about 33 km from the mainland and you can get there from Anzio in about one hour by fast hydrofoil. We took a small boat over to the beautiful island of Palmarola. I did a bit of shortwave listening. More about this trip in the next SolderSmoke.

Sunday, June 28, 2009

Rocket-cam!



I liked this video of the launch of NASA's new lunar orbiter.

Friday, June 26, 2009

VK5DGR's QRSS Rig

David, VK5DGR, built this very fine QRSS rig, and is currently shaking up the grabbers with 20 mW.

I really like his way of putting that power level in perspective:

"Look around your room and find a glowing LED. Well a typical red LED has 2V and 10mA flowing through it, or about 20mW. It can barely make it a few metres to be detected by your eyes. Imagine detecting it at a range of 1200km! That’s what I find remarkable about QRSS - tiny power levels that go a very long way."

For more info, go to David's "Beer, Coffee and a little DSP" blog:
http://www.rowetel.com/blog/?p=118

Wednesday, June 24, 2009

Jupiter from Rome (and from Mars)

I was up earlier than usual this morning and decided to do some planetary astronomy from the Eternal City. The Heavens Above web site showed Jupiter high in the pre-dawn sky. A quick look out the window confirmed that from our courtyard it would be clear of the Trastevere rooftops. Soon the six inch Dobsonian Newtonian reflector was in operation. I got a very nice view of Jupiter and the four Galilean moons through fairly clear Roman skies.

The view was similar to that of the picture above. There are a lot of better shots of Jupiter available on the 'net, but this one is a bit unusual. It was taken from Mars:

Jupiter/Galilean Satellites: When Galileo first turned his telescope toward Jupiter four centuries ago, he saw that the giant planet had four large satellites, or moons. These, the largest of dozens of moons that orbit Jupiter, later became known as the Galilean satellites. The larger two, Callisto and Ganymede, are roughly the size of the planet Mercury; the smallest, Io and Europa, are approximately the size of Earth's Moon. This MGS MOC image, obtained from Mars orbit on 8 May 2003, shows Jupiter and three of the four Galilean satellites: Callisto, Ganymede, and Europa. At the time, Io was behind Jupiter as seen from Mars, and Jupiter's giant red spot had rotated out of view. This image has been specially processed to show both Jupiter and its satellites, since Jupiter, at an apparent magnitude of -1.8, was much brighter than the three satellites.

Text and image from:
http://publicdomainclip-art.blogspot.com/2006/06/space-final-frontier-jupiter-and-moons.html

Tuesday, June 23, 2009

The Xtal Set Society

The Xtal Set Society wins our "Good Guys of the Month" award. In an effort to improve the performance of my Vatican City Crystal Radio, and my hellish regen, I ordered a Hi-Z crystal earphone from the Society. It arrived very quickly, along with a free copy of their newsletter, their amazing catalog, and a free piece of candy!

There is great stuff in the catalog, and the newsletter seems like gold mine of technical info.

Check it out: http://www.midnightscience.com/index.html

Monday, June 22, 2009

SolderSmoke Podcast #110



http://www.soldersmoke.com

June 21, 2009
Day trips in Lazio and Tuscany
My SSSSSolder SSSSSSMoke SSSS problem
Crystal Radios pick up heavenly Gregorian chants...
... regen picks up screeches from somewhere else
Speech processing for DSB?
I0ZY's linear amplifiers
Book Review: "The Ten Most Beautiful Experiments" by George Johnson
MAILBAG (including an update from Dover)

Thursday, June 18, 2009

Herschel Space Telescope Opens its Eyes

First light for a new telescope is always exciting, and even more so when the 'scope is in space. Having all the instruments floating in liquid helium makes it all , well, even cooler.

Here is the BBC report:
http://news.bbc.co.uk/2/hi/science/nature/8099105.stm

Wednesday, June 17, 2009

Crystal Radios from Heaven, Regens from ?

Yesterday I was describing the heavenly sounds coming from my crystal radio. In a minimalist mood, this morning I fired up (an appropriate term!) my ET-1 regen rig. This is the single FET transceiver described in earlier blog articles. The contrast with yesterday's experience couldn't be starker. Instead of Gregorian chants, I was greeted by the screeches of excessive regeneration. The crystal receiver seemed to WANT to demodulate signals, the regen required all kinds of adjustment and coaching and, it seemed, black magic. All this made me think that while the crystal sets are heavenly, the regens seem like they are from the other place.
There is a Roman ham who has said he will try to have a contact with me using this ET-1 rig. One will be enough, then it will be back to direct conversion and superhets for me.

Tuesday, June 16, 2009

Gregorian Chants on a Crystal Radio

Last week I was telling Billy about crystal radios, and I followed-up by digging up the one we built in London. I don't have my really good, HI-Z headphones, but even with fairly LO-Z cans, I could pull Vatican Radio's 1530 kHz signal out of the ether using just a Germanium diode, a coil, a variable cap, and my all-purpose end-fed wire antenna.
I live very close to Vatican City (see above), but I think their AM transmitter is out of town, to the North of Rome. I visited the Wiki on Vatican Radio. Very interesting. Turns out that the Jesuits run the radio stations. Go here for a virtual tour:
http://www.vaticanradio.org/museo_tecnico/it/gal_fot_24.asp
It took me a few minutes to hook up the 4 parts of my crystal receiver; it seemed kind of fitting (and a bit eerie) to be rewarded with the faint sound of Gregorian chants.

Monday, June 15, 2009

Five. Two. Seven. Six. Three. Six. Nine. Eight......

Nick, KB1SNG, reports that he was brought into ham radio via an interest in the infamous "Numbers Stations." He sent along a link to a very interesting site on this subject:
http://www.simonmason.karoo.net/page30.html

Saturday, June 13, 2009

Italian Experimental Station in the Good Old Days... And Today!

Today (he tells me it is 50 years later!) my friend Gianfranco is on the air as I0ZY.
Transmitter back then was homebrew except for a Geloso VFO purchased for 7000 lira (11 dollars at the time). Tubes were 6J5's and 6V6's. It ran AM. Two 807's in the final with 600 volts on the plates. Two 6L6's running AB2 as the modulator. His mic was salvaged from an old wire recorder. Except for the VFO, everything was from WWII surplus.
On the receive side, he had an HRO 5 by National that he picked pretty much in the same flea market area that we visit today. It was in such bad shape that they gave it to him for free! With a lot of patience and persistence, he was able to get it to work on 20 meters. Gianfranco clearly had The Knack!

And he still does! He now has a wonderful company (SPE) that manufactures in Italy some very advanced linear amplifiers. He is the designer and creator of the Expert 1K-FA. Check out this video on his company and his product:



Here is the link to the site for the Expert 1K-FA:
http://www.radio-ham.eu/Expert1K-FA.htm

Wednesday, June 10, 2009

SSSSSSolder SSSSSSSmoke's SSSSSSS problem

In SolderSmoke 109, I did a little experiment. Normally I do some audio processing using Audacity's Equalization option. In all of the recent episodes, I have been using an equalization curve similar to the one shown above. I drop off the low frequencies (to get rid of the Popping P sounds) and I put a notch at around 3500 Hz in an effort to get rid of the problematic SSS sounds. I had my doubts about the effectiveness of all this. Partly in an effort to save time, SolderSmoke 109 I dispensed with the processing. I immediately got a couple of e-mailed signal reports saying that the nasty SSSS sound was back.
I really can't hear it on my computer. This may be related to different sound cards. And some high frequency hearing loss that I picked up on the rifle range may be involved.
If you can, please compare the sound quality in SS108 with that of SS109, and let me know what you think.
Dean, WA6P, and Bill W7AAZ, going to send me a passive audio filter that we hope will help.
On a similar note (!), I am looking for a circuit for a simple audio signal processor for use with my DSB rigs. I need something simple that will provide both clipping (probably via the standard two diode arrangement) AND audio frequency selection. The ability to put upper and lower limits on the audio frequencies is important in DSB rigs, because they lack the crystal filters that do most of this work in SSB transmitters.

Monday, June 8, 2009

SolderSmoke -- The Book. Table of Contents

As promised in SolderSmoke 109, here is the Table of Contents for the new SolderSmoke book.

CONTENTS
Preface

Chapter 1 Electrically Inclined – Tales of an Electromagnetic Youth
Electrons and Electricity
Radio Waves
Some Basic Equations
Einstein in the Transformer
Semiconductors

Chapter 2 Off-the-Air—Amateur Radio Goes Into Hibernation
Junctions and Diodes

Chapter 3 Tropical Rebirth—Ham Radio in the Dominican Republic
The Lowly Capacitor
Resonance and Oscillation
Series and Parallel Tuned Circuits

Chapter 4 Boatanchors in Virginia—Back in the U.S.A.
Transistor Amplifiers
Mixers
Modulation: AM, DSB, SSB

Chapter 5 Mid-Atlantic Outpost—Amateur Radio from the Azores
Balanced Modulators

Chapter 6 Urban Radio—Solder Smoke in Central London
Amplifier Loads

Chapter 7 Rome—Secret Radio in the Eternal City
Feedback in Amplifiers

Chapter 8 Conclusions—A Brotherhood Without Borders

Acknowledgements

Index

To order: http://www.lulu.com/content/paperback-book/soldersmoke/6743576

Sunday, June 7, 2009

SolderSmoke Podcast #109

http://www.soldersmoke.com
June 7, 2009

Violin gig in Rotterdam
June 2 Parade in Rome
Why do we use Rl=Vcc^2/2Po for Class C amps?
NA5N article, EMRFD, SSDRA, LTSpice
Radio Signals from Jupiter and Io (on 17 meters)
VK2ZAY's X-Rays
Jeff Damm, WA7MLH: Homebrew Hero
Tim Walford's Constructor's Club:
Floor Polish as PCB Laquer
Numbers Stations (very timely!)
SolderSmoke -- The Book: Very rapid delivery, even to UK
MAILBAG

Friday, June 5, 2009

The Look of a True Radio Homebrewer

Jeff Damm, WA7MLH, is one of our gurus, a high priest of The Knack. I visit his excellent site from time to time, just on the off chance that he will have posted something new. This morning I was rewarded with this picture from 1988 -- I think it somehow captures the spirit of the true radio homebrewer. Check out all the homebrew gear. Note the copy of SSDRA on the operating table. Jeff assisted with the construction of many of the projects in that book. He helped free us from the tyranny of excessive neatness and right angles, and let us know that ugly circuit construction works just as well.
Here's Jeff's FB site: http://www.neoanderthal.com/wa7mlh1.html

Thursday, June 4, 2009

Walford Electronics

Tim Walford, G3PCJ, offers a really nice line of ham radio kits. I like the names of the products, and of course I really like the DSB kits. The photo above is the workbench on which these rigs are created. Tim also runs a Construction Club and puts out an excellent quarterly newsletter called "Hot Iron." I just received the latest issue, which is a particularly good one -- more about this in SolderSmoke 109.

Here is a list of Tim's kits:

AMU Matching bridge and T match for 10 - 160m
Audio Amplifier General purpose amplifier for driving a loud speaker
Audio Extras Adds AGC and good CW facilities to a phone TCVR
Brendon Small DSB 1.5W phone transceiver for 80m
Brent Small 1.5W CW transceiver for 80m
Chirnside Regen RX, crystal controlled AM TX, for any band to 6m
5D Counter Five digit frequency readout
Dual Low pass filter Pair of relay selected Low Pass Filters
Fivehead Single band 1.5W SSB phone TCVR for 20 - 160m
Kilmot Double sideband 80m 1.5 W phone TX
Kilton 1.5 Watt CW TX - 20 to 80m
Kingsdon 5 Watt phone SSB and CW transmitter to go with Midney
Knapp Single Band regen TRF - 3.5 to 15 MHz
Knole Single Band DC RX, 20 to 80m
Linear 10 Watt RF amplifier for all nominal 1.5W rigs
Midney Simple single band superhet RX for any band 20m to 160m
Mini mix Mixer kit for VFO schemes or as receive converter
Notch filter Variable frequency notch or peak audio filter
Speech processor Boosts average signal level under difficult conditions
Trull Medium Wave regen TRF for newcomers, can also do HF
Two Tone oscillator Provides audio tones for setting up SSB rig
Washford Crystal controlled 1W CW TX for 20, 40 and 80m
Willet Simple direct conversion RX for 20, 40 and 80m

Here is the website of Walford Electronics: http://walfordelectronics.co.uk/

Wednesday, June 3, 2009

NA5N on the NE602


I continue to mine the Gadgeteer News archives.
Here is a good one from NA5N.

Orignally posted on Gadgeteer news, 2 December 2006
NE602=NE612=SA602
(Originally posted by NA5N on QRP-L)
Gang,
The ever famous NE602's are manufactured in the Philips
Semiconductor plant in Albuquerque, about 85 miles north of me. I visited
there last summer and had a nice discussion with an applications engineer
about the history of the NE602's. Goes something like this:

This long story will prove that NE602 = SA602 = NE612 = SA612
(for those of you who don't want the gory details -hi)
The original NE602 was designed/manufactured by SIGNETICS for
the 45MHz FM wireless telephone market. A little later, the wafer was
redesigned a bit to allow the internal oscillator to operate to 200MHz and the
RF to 500MHz. This was redesignated the NE612, and was intended to
replace the NE602. However, customers kept ordering the NE602, getting
angry at Signetics because their distributors were out of stock, etc. So when
they made the chips, they made a jillion NE612's, and labeled some of them
NE612 and the rest NE602 to satisfy the users of both parts. This is why
contemporary data books show the exact same specifications for both NE602
and NE612. They came from the same wafer.

Then Signetics was bought out by Philips, who evidently
continued this practice for a short time, then decided it was rather
redundant. So they announced that the production of NE602's has been discontinued
and listed it as an obsolete part ... giving QRPers around the world
various fits of apoplexy to suicidal tendencies that doomsday had struck.
What wasn't well understood is Philips continued to support production of
the NE612, as they do today.

Then to make matters worse, disaster struck the Philips plant
in Albuquerque in the spring of 2000. A wild grass fire in
northwest New Mexico threatened three main electrical lines that run from
the "Four Corners" electrical generating plant to Albuquerque. Smoke
from the fire caused one of the high-voltage lines to arc, tripping the
circuit off line. Virtually the entire electrical load for Albuquerque
and southern New Mexico was now transfered to the two remaining feeders,
which could not handle the full load, causing brownouts, voltage spikes,
etc. until they too failed. Where I live in Socorro, New Mexico, I
remember the brownouts hit about 4:15pm, outages on and off until the
entire grid went down about 5pm, and stayed off until about 11pm. One of the
longest power failures in US history. We just figured it was Y2K about 3
months late. (PS - I worked 40M CW QRP that night by candlelight, and it
was the quietest conditions I ever heard on 40M!!! And every QSO I
heard seemed to be a QRPer). The extreme voltage fluctations as the
feeders were failing caused a transformer at the Philips plant in
Albuquerque to catch on fire. I remember seeing it on the TV news, in which they
said it caused mostly smoke damage from the burning transformer and
burned a couple of storage rooms. That was all-no biggie. Well, it
turned out one of the storage rooms that was burned was where they stored
the film masters for making the semiconductor dies, and the NE612 film
master was now molten emulsion. These film masters were the originals
from the old Signetics company. So Philips had to completely redo the
artwork for the majority of their IC's. Additionally, it turned out the
smoke damage was excessive and the IC fabrication facilities were
left unusable. Philips was basically unable to manufacture IC's at
the Albuquerque plant for months. It was about 8 months before
they got all their wafer machines back on line, which left a huge hole in
the semiconductor industry. I know it just about killed several
cell phone manufacturers because delivery contracts for parts were
suddenly postponed for six to eight months.

The world wide supply of NE602/NE612's virtually dried up
during 2000 as a result of this fire and the nearly year backlog of
manufacturing quotas. The first run of NE612's in 2 years finally occured in
September 2000.This huge shortage of NE612's, combined with the fact that
NE602's have been discontinued/obsolete, is what convinved QRPers that
these nifty little chips were no more. I was told 20,000 units were
manufactured in 2000, or what Philips believes is a 2 year supply. This is
also why the release of the K1 (with 5 NE612's!) was delayed from the
promised "after Dayton" to late in the year, as were other kits. It just
wasn't clear when Philips was going to schedule the NE612's for production.

So yes, the NE602 is dead, but the perfectly compatible NE612
is still available, and Philips has no plans at the present to
discontinue that part number.

For final clarification:
NE602 = plastic DIP, rated 0C to +70C ... OBSOLETE
SA602 = plastic DIP, rated -40C to +85C ... OBSOLETE
NE612 = plastic DIP, rated 0C to +70C ... AVAILABLE
SA612 = plastic DIP, rated -40C to +85C ... AVAILABLE

or, to answer the final question ...
NE602 = SA602 = NE612 = SA612

72, Paul NA5N