The D-104 -- A Completely Respectable Piece of Ham Radio Gear

Recently we have received some comments along the lines of, "Hey Bill, what's that chrome CB-lookin' mic doin' in your shack?" Having come into ham radio during the great Amateur vs. Citizen Band wars of the 1970s, naturally I was quite stung. Fortunately, an old magazine soon arrived with a photo (above) that should end forever any speculation about the D-104 being somehow "CB." The picture above is from the January 1952 issue of "The Shortwave Magazine" from the UK. G3ZI, L.S. Woollatt, is shown with his very fine station. With the exception of his two main receivers, all of this OM's gear was homebrew. Racks and racks of FB HB gear. If a chrome lollipop was OK with G3ZI, well, then I think that settles it.

The GBT: Great Big Thing (Green Bank Telescope)

Oh man, imagine sitting there in the Faraday-caged control room in the National Radio Quiet Zone, in an area in which things are kept so RF quiet that only diesel vehicles are allowed... "Wired" has a very nice on-line article and photo spread on this magnificent antenna:
http://www.wired.com/wiredscience/2009/10/gbt-nrao-tour/

Listen to "El Silbo" Voice-Powered Rig!

POWER SUPPLY

Michael, AA1TJ, has had more contacts with his voice-powered DSB rig. (Scroll down a bit for a look at the schematic and more comments on this amazing project.) Michael has posted two recordings of his signal (as received at distant stations). When I played these files, Ubuntu showed one of those semi-psychedelic groovy "visualizer" displays, complete with oscilloscope-like patterns; the signal looked FB Michael!
Have a listen: http://mjrainey.googlepages.com/elsilbo

I0/N2CQR WINS CQ WW DX CONTEST!!!!

I'm proud to report that in the category "Homebrew QRP Double-Sideband Phone, Western Trastevere" I think I'm the winner! I came in with massive point count of 7! And guess what -- ABSOLUTELY ALL of the reports I received were 59! Even when it seemed like I had to repeat my call 59 times!
The rig I used is pictured above. More details at:
http://www.gadgeteer.us/PORTABLE.html

Genesis Q5: QRP and QRSS TX for $19.95

Nick,VK1AA, from GenesisRadio sent us a note about a new kit:

Q5 is our 1W 30m CW transmitter kit. Amongst other things, it is suitable for QRSS builders who wants to modify this baby for QRSS projects. I have already received number of reports from G's who made it to VE1 and they all praise excellent stability of this design.

It is only $19.95 -- that's less than you pay in some places for coffee and slice of cake!

GenesisRadio will take you to the roots of homebrewing where electronics and ham radio is still contagiously exciting. Genesis Q5 is a radio transmitter kit designed for novice kit builders and QRP radio enthusiasts. "Hook 'em on ham radio while they're young" is GenesisRadio's motto.
And the Q5 series will definitely meet your expectations: with forty quality components and a professionally manufactured circuit board, the Q5 will get you transmitting on crystal controlled International QRP frequencies running a solid 1 Watt in no time! Price: US$ 19.95 + postage.

For more information visit http://www.genesisradio.com.au/Q5/

Watch two-minute Q5 promotional "Hook 'em on" video produced by 12 years old Josh, VK2FJDX:

http://www.youtube.com/watch?v=5klKvQHqqJ4

SolderSmoke Podcast #117

http://www.soldersmoke.com

In SolderSmoke 117:

24 October 2009
Climbing Monte Calvo + Horseback riding + Piggy-backs = LOWER BACK PAIN
Visit of Bob, W8SX, Soldersmoke correspondent in Dayton
AA1TJ's point contact adventures -- Backwaves and Backwash
AF Collins on Kindle -- "William" Marconi
Hans Summers and Turkish Piracy
RSGB Convention via Skype
"Air and Space" Aurora Article
My new, old Pentium III with Ubuntu (Thanks Jorge!)
Roadkill computing
CQ interviews Joe Taylor, K1JT
New Spart and new Sprat CD
AA1TJ's voice-powered transmitter (and some advice from Italy)
QSOs from Ponticelli: DK1HW/P (SOTA) and UN9GD.
SOLDERSMOKE THE BOOK -- WEEKEND SALE!
MAILBAG

"El Silbo": Michael Rainey's Amazing Voice-Powered DSB Transmitter

Oh man, the wizard of the Vermont hobbit hole has really outdone himself this time. Michael Rainey, AA1TJ, has posted a very interesting report on his experiments with voice-powered radio. I was, of course, delighted that he went with DSB. Check it out: http://mjrainey.googlepages.com/elsilbo

I don't mean to seem like I'm taking any credit for this, but I did provide Michael some technical advice on how to increase power output:

Michael: Obviously the Italian elements in the project were of critical importance. Some of them may have escaped your attention. I note that an olive can was involved... For further progress I think you should consider working in some of the other substances that help keep Italy going: cappuccino, Nutela, and perhaps some vino bianco...

Another thing: While you are shouting, be sure to use the proper gesticulations. I recommend that you go Neapolitan here -- they are the best. I'd say that before each CQ, you should put yourself in a Neapolitan frame of mind: imagine that someone has bumped into your car and that you and the other guy are arguing about who is at fault. This should generate at least 20 mW!

In boca a lupo! 73

Bill

Weekend Sale: Save 15% on "SolderSmoke -- The Book"

For shipping from a printer in the U.S. (probably better for N. American buyers) Click here: SolderSmoke USA Version

For shipping from a printer in the UK, Spain, or the USA (probably better for UK and other European buyers)
Click here: SolderSmoke EU Version

The two versions are identical, except for a minor difference in the paper used. That's why the prices are a bit different.

Enter coupon code 'TRICK' at checkout and save 15% off any purchase - maximum discount $35 per account. Enter coupon code 'TREAT' and save 20% off on any order of $500 or more - maximum discount of $500 per account. Discount cannot be used to pay for, nor shall be applied to, applicable taxes or shipping and handling charges. Promotional codes cannot be applied to any previous order. No exchanges or substitutions allowed. Only one valid coupon code may be used per account. Offer expires on 10/25/09 at 11:59 PM GMT. Lulu.com reserves the right to change or revoke this offer at any time. Void where prohibited.

Great CQ Article on Joe Taylor, K1JT

The October 2009 issue of CQ magazine has a really interesting article on Joe Taylor, K1JT. Joe is a winner of the Nobel Prize in Physics. The article is by CQ magazine editor Rich Moseson, W2VU. I was particularly interested in the Joe's description of how his radio astronomy work led eventually to his creation of the WSJT and WSPR programs that many of us are now using. (Above you can see a WSPR report showing Joe's station in New Jersey receiving my 20 mW WSPR signal.)

CQ magazine has put a "Digging Deeper" article on Joe on its web site. It is not the full October 2008 magazine article, but the on-line article has much of the tech info from Rich's interview with Joe, and in some areas goes deeper. Great stuff! Here it is:
http://www.cq-amateur-radio.com/Joe_Taylor_webOct09.pdf
Thanks Rich! Thanks CQ! Thanks Joe!

Some Interesting QSLs from W7ZOI

Wes, W7ZOI, just put up on the web some QSLs from his collection. They are all very interesting. Take a look: http://w7zoi.net/qslcards/qsls.html I especially liked the "lemon QSO" card shown above.

While visiting the QSL page, I also came across the story of Wes's first encounter with homebrew ham radio. As a kid, he he would listen to a local 75 meter AM operator who was a hardcore homebrewer. On this guy's rig, "even the knobs were homebrew." Wes was listening with a crystal radio! What a great way to get started. More on this here: http://w7zoi.net/shack.html
Thanks Wes!

Duct Tape Repair of Lunar Rover

Hey, doesn't that mountain ("Shorty") on the moon look a bit like Mount Calvo (the one that Billy and I were climbing last weekend, see below)? But I digress. This is all about Duct tape. Apollo 17. The right rear fender on the moon buggy gets broken. Duct tape to the rescue!
http://science.nasa.gov/headlines/y2008/21apr_ducttape.htm

Monte Calvo and a Summit on the Air

We had kind of a mountain theme this weekend. We were out in the country again. After some horseback riding in the morning, Billy and I and some friends decided to hike up a little mountain in the area. It is part of Monte Calvo. We didn't make it to the summit (too much underbrush) but I managed to send an e-mail with the coordinates of our highest point. I put the location it on Google Earth --you can see how we did. On to the summit next time!
Speaking of summits, I only made two contacts with the HW-8 this weekend (from the house, not the mountain). The first was a contest station on 20 meters, UN9GD. But the second (also on 20) was a QRP "Summit on the Air" station. DK1HW/P was running four watts from a KX-1. It was nice to work another QRP station. (It was cold in the mountains this weekend -- my fist was not at its best!)

When all else fails... THE KNACK

Kurt, N3JTW, alerted me to an excellent article on the blog site of the Dutch magazine Elektor. It is about a major flood in the Netherlands in 1953. Cut off from the mainland and without communication gear, OM Hossfeld whipped up the transmitter pictured above and set up a vitally important communications link. He used an 807 tube in the final. 10 Watts out on 15 meters. Note the coil wound on the bottle. The call was PA0ZRK. FB!
Here's the link: http://theelectronicball.blogspot.com/2009/10/radio-to-rescue.html

A REALLY Different Kind of Construction Problem

OK, so you're building a Large Hadron Collider, hoping to conjure up the elusive Higgs-Boson particle. But somehow, every time you try, smoke gets released. Here is one recent theory (reported in the New York Times) about what is going on:

"I'm talking about the notion that the troubled collider is being sabotaged by its own future. A pair of otherwise distinguished physicists have suggested that the hypothesized Higgs boson, which physicists hope to produce with the collider, might be so abhorrent to nature that its creation would ripple backward through time and stop the collider before it could make one, like a time traveler who goes back in time to kill his grandfather."

Wow! This is really useful troubleshooting information! Who among us hasn't been working on something that could be considered "abhorrent to nature"? We are, after all, the "ugly" construction guys. Perhaps if things get a little too ugly, a WHOLE DIFFERENT set of problems kick in. No wonder I couldn't get that 440 Mhz transverter working!!!

Micro Men on the BBC: Sinclairs, Acorns, and the Knack

Now these guys look like some proper British boffins!
Tony Fishpool, G4WIF, sent me this link to a wonderful new BBC program about the early days of home computing: http://www.guardian.co.uk/technology/gamesblog/2009/oct/08/armstrong-freeman-micro-men-bbc

Tony also sent me his own story of computer derring-do in the early days. Here Tony once again marks himself as a true Knack victim, and a true wizard. Commenting on the BBC show, Tony wrote:

...I enjoyed a huge dose of nostalgia. I owned both Sinclair and Acorn computers back then and I suppose they launched me on a geek career that's put food on the table ever since.

One of the first Christmas's of my early married life tested my new bride's
patience with a knack victim for a husband.

A long awaited Acorn Atom kit computer finally arrived on Christmas Eve. All during Christmas day I was hunched over a steaming soldering iron installing every capacitor, resistor and semiconductor in the computer's printed circuit board.

That evening after the last component was installed I applied power and
there was a beep and the TV (which should have been showing Christmas
movies) displayed :-

Acorn Computers

Ready>

Wow!

How I managed to get that computer working first time still amazes me to
this day. How I am still married amazes me even more - but I was "in the
zone" and that computer just had to be built.

The TV show is called "Micro Men" so look out for it.

Kind regards
Tony G4WIF

RSGB Convention... via Skype

The fellows running the RSGB convention asked me to come up to the UK and speak at this year's event. I couldn't make the trip, but we decided to try to set up a virtual appearance via Skype video. Brian, G8OSN, put it all together, and the link worked like a charm. It was really a lot of fun, and I didn't have to be away from the family.
As noted below, you can see a video of one version of my talk by clicking on the video links off to the sides of this blog page. Thanks again to RSGB, and especially to Brian, for giving me the chance to do this.

Video Smoke

There is a special SolderSmoke video on YouTube today. Look for the
M0HBR channel. Or use the SS Video link to the right on this blog 73
from Ponticelli
Bill

Columbus Day Sale on SolderSmoke (The Book) Save 14.92%

Enter coupon code 'PINTA' at checkout and save 14.92% off any purchase - maximum discount $25 per account. No exchanges or substitutions allowed. Only one valid coupon code may be used per account. Offer expires on 10/12/09 at 11:59 PM GMT. Lulu.com reserves the right to change or revoke this offer at any time. Void where prohibited.

Lunar Impact on October 9 -- LCROSS Hits the Moon

It is a bus-sized object and it will hit at approximately twice the speed of a bullet!

Even though my telescope is a bit smaller than the recommended minimum, I'd be tempted to see if I could see it.... But that 1130 GMT impact time would make it difficult from Rome!

Kid in Malawi Builds Homebrew Wind Power System

This is a very nice story. Inspirational stuff. Young William Kamkwamba wanted to bring electricity to his family. So he went to a library, got some plans for a windmill, then gathered the parts and built one.
http://williamkamkwamba.typepad.com/

AA1TJ's Nifty Fifties Pixie

Once again great things are happening in the underground lab of Michael, AA1TJ. Michael has temporarily put aside his work on Iron Pyrite-based receivers, and is now working the world with 50's era point contact transistors. I can feel the enthusiasm, even all the way over here in Rome. I particularly liked Michael's description of the QSO in which the other guy heard his backwave. Backwave is the very small signal that is sometimes put out when the key of simple transmitter is up. For example, the oscillator on my old VXO-controlled 6 watter (from "QRP Classics") ran all the time -- I just keyed the amplifiers. Sometimes guys would report hearing some of the RF from the oscillator even when the key was up. (By the way, the term backwave reminds me of a word used sometime by Billy and Maria: backwash. As in, "No Maria, you can't have a sip of my soda -- you always leave backwash!")

In his e-mails, Michael mentions that the physics of the point contact devices are a bit of a mystery for him. I recall that the book "Crystal Fire" by Riordan and Hoddeson had some pretty good info on how these early transistors worked.

Here are some excerpts from Michael's e-mails on this project:

I haven't had time to document this pyrite/tunnel diode receiver on account of a phone call that I had two weeks ago from Jack Ward at the Transistor Musuem. Jack approached me with an idea to recreate the first ham radio contacts using transistors. Of course, the point-contact transistors involved are now pretty rare items. No problem for a fellow with a transistor museum though!

Jack kindly sent me a couple of Western Electric, 2N110 "relics." I had some initial trouble with "squegging," and I wasn't able to produce oscillation above 380kHz. To read a recent tale of one fellow's trouble trying to tame the 2N110, please see

http://homepages.nildram.co.uk/~wylie/GEC/radio/article.htm

I especially liked where he wrote, "I did seriously consider giving up at this stage and taking up heavy drinking." ;o)

However, I located an old textbook that discussed circuit design theory using point-contact transistors (the physics of these devices are still clouded in mystery). What I learned made all the difference. A few more hours at the bench and I had an 80m transmitter putting out 10mW.

The story gets better though, Ned. A circuit briefly described in another old book really caught my attention. It was pretty much the same circuit as was used by George Rose, K2AH, in his first transistor QSO. Only, a circuit (designed by G3IEE) showed a pair of headphones in dotted lines, next to the collector resistor. The text merely said

"As indicated, the circuit also functions as an oscillating detector type of receivere for local continuous wave operations whith head phones plugged into the collector circuit instead of resistor R3. Good reception and break-in operation were obtained."

That got my blood moving! Positive results came right away on the bench. The received signals were every bit as strong as with my Reggie and the Cub Scout heterodyne (what I started calling, "Chester," after the name of the mine where the pyrite was found).

I had my first QSO last week using Jack's point-contact transistor (made in 1956) in the transceiver designed by G3EII (in 1954). Jim, W1PID, was my first contact. Since then I've made over a dozen QSO's with five different stations.

FYI, I'll paste a message below that I sent to Jack Ward this weekend. One thing I forgot to add is that W1VZR copied my 10mW signal on his Cake Pan regenerative receiver over in Maine last week. Aside from my three QSO's with VE3DJX at a distance of 319 miles, the other notable results to-date were hearing both W1DFU and W1PID - in the course of separate QSOs - when they dropped down to an output power of 100mW.

Again, I haven't had a chance to post much on my web site, but I do have the current schematic up, and you can see both K2AH and G3IEE's circuits in scans from the old transistor book. G3IEE's circuit is shown in Figure 16.2 in the second jpeg image.

http://mjrainey.googlepages.com/projecttransistorqsoii

One more thing, Ned. I hooked up this past week with G3JNB. Victor was one of the fellows (he was only 21 at the time) working with Tony, G3IEE, back in 1954 to make the first-ever, UK ham radio QSOs using transistors. Victor has already posted an envelope containing copies of his log, the QSL card from G3IEE and the original, 1954, Wireless World article describing their results. In the course of our Skype video call last week, Victor held up to the camera the RAF telegraph key that he used for his QSO with Tony. Pretty neat, eh?

I've got to get back to work here. Congratulations on getting your Reggie up and running, Ned. I look forward to seeing the photos and I'd surely like to hear about any contacts you make with it. Speaking of which, I have some photos of Jim, W1FMR's beautifully constructed Reggie that I've been meaning to post on my web page. Once I get around to it would you mind if I include one of your photos as well?

Best wishes,

Mike, AA1TJ

Hi Jack,

Yes, I had great fun with our little 2N110's this past week. Of of now, I've had well over a dozen radio contacts with five different stations. I used 10mW of output power to make these contacts. The distances shown are all "as the crow flies."

W1PID, Sanbornton, NH, 67miles; lowest power used on his end 100mW
VE3DJX, Smith Falls, Onatario, 319 miles; 10watts on his end
W1DFU, Wallingford, VT, 42 miles; his lowest power was 100mW
W1VZR, Limerick, ME, 100 miles; 40w

Pete, the last fellow listed, heard the 2N110 while it was running as a "beacon" with a continuously looped Morse code message. Having received my call-sign he located my email address and shot off a reception report. I saw his message pop up on my computer and quickly looked up his telephone number. He was still at his radio when he picked up the phone. I found him pretty excited as my signal strength had sharply risen in the last few minutes. He asked if there was a problem with my keying circuit as he could still hear a faint tone on my frequency when my transmitter should have been silent. "Ha!" sez I, "You're hearing a 100 microwatt back-wave radiation!" The distance separating us divided by the 100uW power is equivalent to 1 million miles per watt; a very impressive figure!

One more station answered my CQ this past week from near Hartford, CT. However, I can't recall his call sign and I'm currently at work but my logbook is at home. My output power was up to 17mW during that contact; on account of a temporary change that I made to the circuit. However, pushing the transistor to that power level reduced the quality of the keying, and so I returned to 10mW following that contact (earlier, I'd reported that my output power was 12mW, but a more careful measurement indicated that I was only putting out 10mW).

You might have noticed that I've posted the schematic to my web site. However, I expect the circuit will change over the next week, or so, as I still want to tinker with the keying circuit. By all reports my signal is good but it has just a touch of keying "chirp." Chirp is what hams call a variation in the received signal tone when the telegraph key is first depressed. Again, I expect to have that sorted out before long.

Yes, it was a real pleasure talking with Victor, G3JNB. FYI, I'll send you copies of all the documents that he provides. He said that he's including some original data sheets for point contact transistors that he's held on to these past 55 years. I'll keep copies and send the originals to you.

I asked Victor if he'd like me to build a duplicate radio for him using the second 2N110 that you sent me. I think he was thrilled to hear my offer. Don't you think it would wonderful if he, of all people, managed to make a contact using a reproduction of the point-contact transmitter that he and Tony, G3IEE, used in those pioneering days?

The order of business next week is to finalize the circuit design and begin building two identical circuits into permanent radios. Of course, I'll take time off, now and then, to try and make more contacts. I'm already astonished that it was possible to span a distance of 319 miles (not once, but thrice!) using your ancient transistor relic.

Acting on your suggestion, I looked up the other fellows mentioned in K2AH's article. It turns out that Tommy Thomas, W2UK, was quite a radio pioneer on VHF.

http://www.infoage.org/html/p-43W2uk.html

Unfortunately, I've learned that he passed away not so long ago. The call signs of the other two fellows are not currently in the FCC database (I suspect because they are gone as well). A quick search on the Internet turned up nothing on them.

Victor, G3JNB, remarked that he believes that he is the only one left of his original group of transistor enthusiasts. Doubtless, one reason is that he was only 21 years-old at the time of the experiments with G3IEE.

Victor reports that Tony, G3IEE, worked as an engineer for Mullard. I guess that explains where his transistors came from. Victor used a standard vacuum tube transmitter for his first contact with Tony, but sometime later he built his own one-transistor transmitter following Tony's design. Victor says that he used it to make one or two contacts across town before he put it on the shelf. Again, I'll be very interested to see the photocopy of his station log from that period.

One more thing, Jack. I'm fortunate to count George, G3RJV as a pal-o-mine. George is a recently retired Anglican vicar, but he also founded the GQRP; what began as a society of UK amateurs interested in low power operation. Since then, it has become something of an international institution. I had a message of congratulations this week from George; saying that he's keeping a watchful eye on our project. In return, I inquired if George might be able to put me in contact with folk that might help shed light on what was going on at that time (transistor-wise) in the rest of "Hamdom". That is, I'd like to assemble a folder on the topic of "first transistor QRP QSOs" for Japan, Western and Eastern Europe, Australia, etc.. I'll keep you apprised of any news.

That's all from here, Jack. Once again, I'd like to express my thanks to you for including me in your project. It's already been great fun and a real pleasure to meet some wonderful people.

Kind regards,
Mike, AA1TJ

Vietnam Junk Box Robotic Homebrewers

http://english.vietnamnet.vn/tech/2009/09/869993/

Inspirational stuff. Wizards at work!

SolderSmoke Podcast #116

http://www.soldersmoke.com

27 September 2009
Wild Boar Hunting Season Opens
SPRAT and QQ on Kindle?
Kite Antenna Day -- An idea whose time has come!
Doublet antenna in Ponticelli
Ponticelli QSOs on 40, 20, and 15
Steve Roberts -- Knack on a Bike
AA1TJ goes Iron Pyrite and Point Contact
Princess Elettra Marconi
SolderSmoke Book:  Price Reduced AND Oktoberfest Sale!
Prices reduced on T-Shirts, coffee cups, bumper stickers
MAILBAG

SolderSmoke (The Book) SAVE 20% ALSO: WE NOW HAVE SHIPPING FROM USA , UK, AND SPAIN

Lulu is running an Oktoberfest sale. You can save 20% on SolderSmoke (The Book). Please help spread the word to those who (gasp!) might not be checking this blog every day. Promo 1: Enter coupon code 'PROST' at checkout and save 20% on the purchase price of any order up (maximum discount $25. Promo 2: Enter coupon code 'OKTOBERFEST' at checkout and save $50 on the purchase price of any order of $200 or more. Discount cannot be used to pay for, nor shall be applied to, applicable taxes or shipping and handling charges. Promotional codes cannot be applied to any previous orders. No exchanges or substitutions allowed. Only one valid promotional code may be used per account. Offer expires on 09/27/09 at 11:59 PM GMT. Lulu.com reserves the right to change or revoke this offer at any time. Void where prohibited.

For the version that ships from Europe use this URL:
http://www.lulu.com/content/paperback-book/soldersmoke----a-global-adventure/7708153

For the version that ships from the USA use this URL:
http://www.lulu.com/content/paperback-book/soldersmoke/6743576

Meeting Princess Elettra Marconi

Last night at a diplomatic reception in Rome I had the privilege of meeting Princess Elettra Marconi, daughter of the inventor. She is a charming lady. We talked about ham radio, about her dad, and about some the recent books that have come out about him (including Thunderstruck.) Above is a photo of Princess Elettra on her eighth birthday, onboard Marconi's yacht Elettra. This must be a very poignant photo for the family -- the caption indicated that the inventor died later that day.

Auroral Memories from W7ZOI

Hi Bill,

I was really on top of it this time and listened to Soldersmoke 115 yesterday evening, the same day I got it from the Internet. I was intrigued by your description of the aurora in 1972. I don't recall that one. By then we were in Oregon. We have had some strong ones down this way, but missed them visually because of cloud cover, a common problem in Oregon. But I have fond memories of the first and most spectacular show I ever did see. This happened when I was trying to go on the air in eastern Washington. I knew that I had put something in my log about it, so last night I pulled my log books of that day and started looking. It took a while, but it was there. QTH at the time was Richland, WA, which is in the SE corner of the state, right on the Columbia River. The station is the first B&W photo on my web site.

I see in my log that on 9/12 of 1957 I had been active. I called a ZL at 1:40 AM on 20M CW. (All times are Pacific time. Probably daylight time.) Then I had worked w2gqn in NJ at 18:11. But the band became quite noisy after that. I have log entries for September 13th, '57, starting just after midnight:

0020. "Tremendous Northern Lights display. Approx 300 degrees of the sky was colored. Sky had green tinge to the north and red in east and west which extended almost to the direct south. Noise level on 14 mc very high. Noise had the character of an electric shaver. Noise masked all signals except W6ULS on 14.048. Noise cleared at 00:44 and heard KG6AAY (Guam). Static crashes remained. 7 mc seemed unaffected by the noise."

00:49. called KG6AAY. No luck.
00:56. called ZL2AHA. Again, no luck.
No more entries until 16:25 when I worked a local friend, Wn7JII on 7 mc.

Yea, I know; the frequencies were in mc back then.

Thanks for stirring up some really fun memories.

73, Wes
w7zoi

AA1TJ's Point Contact Contacts

I was very glad to see that Mike, AA1TJ, is back in his underground shack and once again pushing the limits of QRP technology. This may be one of his greatest QRP-capers:

Gents,

It was one of those rare days on the bench where everything I touched
turned, if not to gold, at to least silver. At the end of my last shop
session on Friday I could only get Jack Ward's point contact
transistor to oscillate as high as 385kHz. And that was without a
load. I brushed up on the theory over the weekend and set upon the
circuit today after lunch with a vengeance.

Better yet, over the weekend I found a wonderful circuit in a
transistor handbook dating from 1956. This circuit first appeared in
"Wireless World" in may of 1954 ("160 Metre Transistor Transmitter").
At first glace, the circuit looks identical to George Rose, K2AH's
historic circuit. However, Mr. Cockle (don't yet know his call sign)
shows a dotted transformer and headphones next to the collector bias
transistor. He'd figured out the point contact oscillator could double
as a direct conversion receiver! A 1954 vintage "Pixie," only
simpler! The key to it all is the signal tank in the base circuit.
That is to say, the transmitter output power is picked off the base
circuit tank. It sounds daft, but bear in mind the circuit has more in
common with a tunnel diode oscillator than it does a feedback
oscillator that most of us are familiar with.

I'll cut to the chase as I want to get back on the air ASAP. The
Western Electric point-contact transistor is sending 12mW up the
transmission line. The same circuit is working FB as a receiver with
full break-in and 800Hz RIT offset. I put it on the air at 2234 this
evening. At 2247 K1IQI answered my CQ. He first sent a "QRZ?" so I
repeated my call several times. He came right back with my call and
gave me a 219 report from Monson, MA. Unfortunately, QSB wiped out my
next transmission. He returned with an apology, wished us better luck
next time and then he was gone. Close but no cigar!

I'm headed back to the shack once I send this message. I'm rock-bound
on 3533.6kHz. I'll be calling CQ and listening until 0300, or so.

Right, here I go.

73/72,
Mike, AA1TJ

"I didn't care. I had a secret life..."

Dreams of Escape…

It began in Kentucky in the early ‘60s: I was a ham radio operator known as WN4KSW, a skinny burr-headed prisoner of school, isolated in the cultural drought of the Midwest. I was theoretically a smart little bugger, according to test scores, yet I kept hearing that I had attitude problems and wasn't working up to my potential. With the exception of science fairs, my academic performance was apparently disappointing to authority figures. Oh well. I didn't care: I had a secret life.

Thus begins the really amazing and inspirational story of Steven K. Roberts, N4RVE, the "Knack on a Bike" guy whose videos I mentioned last week. Stop whatever it is you are doing, and proceed to his web site. Read his story:

http://microship.com/resources/technomadic-tools.html

And don't miss the other great content on his site. Click on his resources link.

Weekend QSOs from Ponticelli on 40, 20, AND 15

When we returned to the Ponticelli site on Saturday I found that one end of my new doublet antenna had fallen down. No problem. One throw of the old rock-and-string and we were back in business. On Sunday I fired up the solar-powered HW8 and worked four stations on three bands: OZ8SW and US7IVW on 20, S59DDR on 40, and --icing on the cake-- OY1CT in the Faeroe Islands on 15 meters (the picture above is of his QTH). I haven't had a contact on 15 in a long time. I really like the frequency flexibility of the twin-lead doublet antenna.

SolderSmoke Book "Pirate Day" Sale! 15% off

Looks like Lulu is running a 15% off sale for "Talk like a Pirate Day." Apparently you just have to write "AHOY" when they ask for a promotional code. Here is what Lulu says:

Enter coupon code 'AHOY' at checkout and save 15% off any purchase (up to $100). Discount cannot be used to pay for, nor shall be applied to, applicable taxes or shipping and handling charges. Coupon codes cannot be applied to any previous orders. No exchanges or substitutions allowed. Only one valid promotional code may be used per account. Orders must be in U.S. Dollars. Offer expires on 09/20/09 at 11:59 PM GMT. Lulu.com reserves the right to change or revoke this offer at any time. Void where prohibited.

Knack on a Bike: Steve Roberts Video

Oh man, this is great! The Winebikko! Gizmology! He even had an Oscar 13 satellite station on the bike. You guys are gonna love this:

SolderSmoke: The Book NOW ONLY $19.99

I found a way to bring down the price on SolderSmoke -- The Book.
It is now $19.99 plus shipping. Check it out:

http://www.lulu.com/content/paperback-book/soldersmoke---a-global-adventure-in-radio-electronics-%28ships-from-a-us-printer%29/6743576

This all has to do with paper availability, so this version ships only from U.S. printers. This will be a good deal for most buyers, but for buyers in Europe and Asia shipping costs might make this version too expensive. I will put up a standard version that ships from Lulu printers in Europe in a day or so.

Ponticelli QRP Station Gets New Antenna

At the country place I now have a table on the front porch for the HW-8 and assorted gear. In the picture above you can see the Trastevere Flea Market Pi Section antenna tuner (upper left), a Japanese SWR meter (also from the flea market) , HW8 and Radio Shack speaker, Volkswagen Solar Cell, 12 Volt gel cell, key and cans...
I had been using a piece of wire just thrown up in the trees, but I thought I could do a bit better. I had some TV twin lead in the shack, and there was this useful-looking center connector... I had some AC line cord. Next thing you know I had a sorta-doublet antenna supported by a Roman Pine in Sabina (pictures below).
And it gets out! Worked IT0ULN in Sicily on 40 meters. Then I spoke to another QRP station, 2W0NNN in Wales, on 20. Also UU4JDD/P on Tuzla Island. Finally E53AX in Estonia.
Ioan, 2WONNN, sent this report:

Hi Bill, thanks for the email, I look forward to seeing the pics on your blog too. Very interesting reading, same goes for your QRZ page too. I had to laugh at your DX with an astronaut on Mir!!!

Your HW-8 and doublet is certainly working well; I remember you were completely readable with a good signal about 90% of the time, it was only the QSB that made it difficult. To be honest I was surprised to have a QRP QSO with someone in Italy. I was using my FT-817 with a new Par End Fedz that I'd catapulted over a tree. The top was about 15m high but oriented as a sloper to the north west. I've had a fair number of QSOs with East coast US stations so I thought I'd go for an over-the-pole route to the West coast... there in Italy you're pretty much spot on the opposite direction so I'm not sure it's all that directional!

73 and hopefully speak to you again for more QRP/QRP!

Ioan,

2W0NNN

Armadillo Aerospace Video

SolderSmoke Podcast #115

http://www.soldersmoke.com
Camping in Sabina
Michelangelo's late start
Anniversaries: Internet, SolderSmoke, Hack-A-Day
From Kitty Hawk to the Moon 
Carrington flares and childhood aurora
Calculating speed of light (using cheese)
Mythbusters
Hubble Space Telescope, Sliding Spring Observatory 
Europa
Transistor Museum
Understanding Mixer products
FALL SALE AT SOLDERSMOKE CAFE PRESS STORE! 
MAILBAG

Mixing it up

OK, enough of the pretty pictures from outer space, now it's time to go back to mixer math.

In the podcast, on this blog, and in the SolderSmoke book I have chronicled my efforts to understand how mixer circuits REALLY work. For some of us, the trig is just not enough. We want intuitive understanding. Ya' gotta draw us a picture. Mike KC7IT, and Dennis W6DWF, both alerted me to a good one. It is from a new book "RF Front-End: World Class Designs", Edited by Jane Sullivan Love. The chapter on mixers is available online here:
http://i.cmpnet.com/rfdesignline/2009/08/C0429pt1.pdf

I really like figure 9.6 (above). You can really SEE how the switching action that is driven by the LO kind of "chops up" the RF signal and produces the complex waveform that is the IF. The neat thing about the IF waveform in this drawing is that you can clearly see both the sum freq (the smaller squiggles) AND the difference freq (the overall movement inside which the smaller squiggles are present). Go ahead, count them up! Sums and differences!
This is a special kind of mixer: a polarity-reversing switching mixer. When the LO is negative, it inverts whatever is at the RF port. From this you can see why mixers are described mathematically as "multipliers." This mixer is multiplying the instantaneous value of the RF input by +1 (when the LO is positive) and then by -1 (when the LO is negative).
I think it is quite a bit harder to "see" the genesis of the sum and difference freqs when you are working with non-switching mixers, but this diagram is, I think, really useful in gaining an intuitive understanding of what goes on in the mixing process.

Hubble Space Telescope: New and Improved!

I know, I know, it is not exactly ham radio, but look at it this way: electromagnetic waves from far, far away! REAL DX. And some very cool gear to receive the signals. And some recent repair and modification work... So you see, this is really not so far afield after all.

I've been a big fan of the Hubble Space Telescope for a long time. When I was closer to the equator (in Santo Domingo) sitings of the HST were quite common. I'm glad to see that the recent repairs and mods worked out so well. Here is a really nice video on the new and improved Hubble: Hubble Space Telescope Video

Saving the world, finding comets....

Well I guess the hours are not great, but how about the job satisfaction! Rob McNaught works at the Sliding Spring Observatory about 400 km from Sydney, Australia. The observatory searches for comets and asteroids that could do to us what they may have done to the dinosaurs (see below). A significant fringe benefit of this job is that Rob gets to discover new comets. He recently set world record by finding his 50th. Congrats Rob!

The mission of the Siding Spring Survey is to contribute to the inventory of near-earth objects (NEOs), or more specifically, the potentially hazardous asteroids (PHAs) and comets (PHOs) that may pose a threat of impact and thus harm to civilization. The identification of the iridium anomaly at the Cretaceous-Tertiary boundary (Alvarez et al., 1980) and associated Chicxulub impact crater (Hildebrand et al., 1991) and perhaps recently the Australian Bedout crater (Becker et al., 2004) associated with the Permian- Triassic "great dying" (although the presence of shock metamorphism has not yet been adequately demonstrated), strongly suggests that impacts by minor planets play an important role in the evolution of life. These are a natural result of the accretionary process that formed the Earth and planets. Indeed, the 1994 impact of D/Shoemaker-Levy 9 on Jupiter provided tangible evidence of this. Although the collision frequency is much lower than in the past, the question is not whether there will be other impacts, but when.

Early Crystal Set in Altoids-like Box

Even way back then, British homebrewers had an affinity for Altoids-like boxes!
David, M0VTG, sent me the above pictures, and this description:

I enclose some pictures of a kit produced in the early to mid 1900s of crystals and a holder for use in a crystal radio; unfortunately the cats whisker is missing! The box is marked:

Front: NEUTRON Back: Neutron Ltd

Trade Mark Sicilian House

Wireless Crystal Southhampton Row

1/6 Phone Museum 2017

Catswisker and

Directions Enclosed

The 1/6 refers to the price (one shilling and six pence) pre-decimalization and converts to seven and a half pence today (although the half pence has been dropped thorough inflation). I should add that the box measures about an inch and a half in length.

Carrington Flares, Aurora, Where were you on August 4, 1972?

Greg, KC2DWF, sent me a really interesting story about the work of the English solar astronomer Richard Carrington. He discovered a kind of solar flare (named for him) that comes along every few centuries and could knock us all off the air.

As I was reading the article, I started to think about a childhood event that I think I mentioned in one of the podcasts. I have vivid memories of a summer night in which the skies were filled with really bright colorful lights. The article about Carrington notes that there was a major solar flare (but not of Carrington levels) on August 4, 1972 that caused auroral displays far into the southern part of the USA. The year is a bit later than I thought (I was 13 at that time) but the time of year is correct. And that flare was big enough to have caused really vivid aurora over New York.
The NASA site "Brushfires in the Sky" provides this very helpful list for people, like me, trying to figure out what we saw, and when:

The Aurora Watchers Handbook lists the following "Great Geomagnetic Storms" of the 20th century when auroras were seen much farther south than usual. If you have a childhood memory of aurora borealis, it may have come from one of these storms.

• October 31 - November 1, 1903
• September 25, 1909
• May 13-16, 1921
• April 16, 1938
• February 11, 1958
• July 8, 1958
• August 4, 1972
• December 19, 1980
• March 13-14, 1989

Looks to me like my event was August 4, 1972. Anyone else have memories of this storm?

Here is the article that Greg sent:
http://science.nasa.gov/headlines/y2008/06may_carringtonflare.htm

The Transistor Museum

Wes, W7ZOI, relayed to us this great site found by from Jeff Damm, WA7MLH. This is a real treasure trove of transistor history:
http://semiconductormuseum.com/Museum_Index.htm

Alaska QRSS Grabber Controlled from CHINA!

Our friend Laurence leads an interesting life...

http://www.kl1x.com/

Hi Bill and greetings from the NE coast of still summery China - actually its cooling down a bit from boiling over to just cooking.

Just been home to Alaska. Whilst and between lumberjacking 20 dead trees on the property I had a few mins to throw up a K9AY and connected it via 250ft of Walmarts best RG6U into the R75 - with a little help of Ham radio delux, Citrix and Skype I have control of the radio from here in China - Mostly on 30m but really shoved it up for the winter lf/mf season but of course WSPR and visual modes have proved very popular. So until a moose walks thru, a Wolf chews threw or wife cuts thru the antennae wire it will be up.

Here in China I'm sporting the second r75 and this supplements the SDR IQ - my antennae are gradually getting blocked towards the states and Eu by every rising high rises just in front and I can actually measure the increasing losses at LF and HF as the beast rise. Still looking for your WSPR signal and keep up the good work.

Regards
Laurence G4DMA et al - KL1 X and in BY3A

A Good Old VFO (by Rick, KK7B)

Here is another really great message from Rick, KK7B, sent to the emrfd yahoo group: [emrfd] A Good Old VFO Saturday, August 22, 2009 10:29 PM From: Rick To: emrfd@yahoogroups.com For several critical receiver applications in my lab I've used old Collins PTOs converted to solid state (I just replace the triode in the classic Hartley circuit with a J310 and run the circuit from a 9 volt regulator). I have half a dozen of them in dedicated propagation study receivers, and one SSB exciter I occasionally use on UHF. The other day I was changing something else in one of my receivers and connected the solid-state PTO to the frequency counter on my bench. The PTO was set to 3.100000 MHz. From a cold start (it hadn't been turned on for years) it drifted three Hz over the first ten minutes, and then a total of 10 Hz over the next few hours. When I calibrated one of my 144 MHz propagation study receivers 25 years ago, total frequency drift was <18Hz/hour. I expect most of that was aging of the overtone crystal oscillator in the premix circuit. Old Collins PTOs are common (someone at Dayton this year had a box of unknown ones in decent shape for $10 each, and there are R390 PTOs in the current Fair Radio flyer). I've never had one fail, tuning resolution is infinite, phase noise is low, digital noise is zero, and once I build one into a receiver, that part of the project is done--no improvements, software upgrades, needed. My research receivers are connected to a baseband Fourier analyzer (yes...even 25 years ago). The finest resolution I've used for serious experiments is 10 milliHertz, but more often I use 1 Hz resolution, with 1024 channels in the output spectrum. I often average spectra for more than a minute, so frequency drift needs to be less than 1 Hz per minute. The solid-state Collins PTO is much more stable than needed even for those critical experiments. This is not a fluke. Every Collins PTO I've converted to solid state using a U310 or J310 has had similar performance. Sometimes it is useful to remember that the major benefit of digital frequency synthesis is that it is quick, cheap, and frequency agile. No commercial manufacturer could afford to build a transceiver with a Collins Mil-Spec PTO in it these days. But for an amateur with mechanical skills or access to surplus hardware who needs just one good oscillator, the venerable Hartley with a temperature compensated tuned circuit and a JFET can provide outstanding performance. In music, art, architecture, automobiles, motorcycles. .. there are recognized "golden eras" where some combination of factors resulted in technical hardware that is widely recognized as being superior to what is being produced today. Often the difference is directly related to the amount of skilled labor needed during production. As technical hobbyists, we automatically assume that new is better, but as experimenters, we should be open to the idea that sometimes the technology, ideas, and block diagrams of an earlier era are superior to the cost-driven disposable technology coming off fully automatic assembly lines in some out-of-the-way place with inexpensive labor and attractive business tax codes. The idea that old technology designed decades ago by retired guys might be better than new technology is a radical concept in electronics. But NASA is using a brand new, hand built, Traveling Wave vacuum tube in the current Moon exploration mission. After 100 years of radio experiments- -it is fun to look back and find old technology that might actually work better than some of the new things we've been inventing recently. Best Regards, Rick KK7B

Sonya's Rig

Stewart, G3YSX, provided us with Part II of his article on the espionage radio work of the Soviet spy Sonya (who had the Knack).

Sonja Continued

A few days after my article on Sonja the Spy was published in the September 2004 edition of the CARC newsletter, I received a letter from club member Eddie Ramm
DK3UZ filling in a few additional details.

The Fuchs antenna that Sonja used was first described by Dr Josef Fuchs, OE1JF, in 1928 and is a half-wave end-fed design.

End-fed half-wave antennas are very efficient and do not need a particularly good ground, but they are very high impedance and need a suitable matching circuit. For a spy the use of a simple, but efficient, antenna of this type would have its attractions.

Eddie then pointed out that the design is of current interest to the QRP community by pointing me to the following URL: http://www.qrpproject.de/UK/fuchs_ant_.htm. This describes a 5 band portable QRP antenna designed by Frank, DL7AQT, based on the Fuchs design. The antenna is a 40m to 42m length of wire and the ATU is a parallel tuned circuit using a pair of toroids and a 200pf variable capacitor. It is worth reading the English version of the manual, which discusses the issue of self-resonance in these high impedance matching circuits. Matching circuits of this type only function correctly below the self-resonant frequency. Frank used of a two toroid arrangement to the move the self-resonance from 18MHz to 60MHz, thereby producing an ATU that operated correctly from 80m to 10m.

The second point that Eddie raised was the term “Three Point Oscillator” that Ruth used to describe her (Sonja’s) transmitter. The German term is “Dripunktsender” (three point sender), which Eddie tells me is the term was used to describe both the Hartely and the Colpitts based transmitters. Both oscillator designs are similar in the way that they use the reactive components in the tuned circuit as an impedance transformer to provide the coupling between the tuned circuit and the amplifier, so the use of the common term makes sense. He included an article dated January 1939, which shows a 3W automatic transmitter for maritime use, which is of the Hartley design and is described as a Dripunktsender. The article can be found at http://www.radiomuseum.org/funkschau/1939/funkschau_12jg_0339_1v2.pdf and the Hartley transmitter circuit is shown above.

We have no way of knowing which type Sonja actually used, although, as I suggested before I would suspect that it was the Hartley. This is likely because the Hartley was popular in the amateur radio world at the time and we know that she improved here spy transmitter by using amateur radio techniques. Secondly, because her transmitter had to fabricated, without raising suspicion, using material found in the field, a Hartley would seem to be the preferred design. A Hartley has no critical capacitors, just a coil which can be fabricated out of an “innocent” piece of wire or metal, and adjusted to give both the right inductance and the right feedback.

Stewart G3YSX

SolderSmoke Podcast 114

A particularly big one. Not the one we heard.

http://www.soldersmoke.com

Roman Forum, Sabina, Snakes! Wild Boar!
Amateur Engineering?
WSPRing again (cheap thrills?)
Trastevere flea and a return to 1995
Electric airplanes
Ether rediscovered?
Galileo!
Sir Douglas Hall
Sonya had The Knack
Altoidism?
MAILBAG