The "Snort Rosin" Test Gear Philosophy

Steve Smith, WB6TNL, and I often find ourselves on the same frequency:

Hi Bill,

After reading your latest blog post, I realized that you and I are somewhat kindred spirits. You successfully build and test relatively complex amateur radio equipment using the most basic and inexpensive test equipment.

As part of my business (land mobile radio) I own expensive and complex test equipment, however when I build and test homebrewed amateur radio gear I prefer to use inexpensive home-built or kit-built test equipment because that is what is generally available to most hams. My philosophy is that it is very important to impress upon beginning homebrewers the fact that fancy, complex test gear is not absolutely necessary to be successful in homebrewing.

Perfectly functional test gear can be built using only basic electronic tools. Certainly, homebrewed equipment might not have all the 'bells and whistles' of commercial gear and won't do everything 'automagically' but with careful calibration and learning how interpret the results, homebrewed test equipment can provide very accurate measurements.

One good example is your Palomar R-X Noise Bridge. Most every ham wants a MFJ 259B or Autek VA-1 antenna analyser but an inexpensive bridge like the Palomar or a homebrewed equivalent can provide many of the same measurements. Sure, a ham-band or general-coverage receiver is required to use a noise bridge but, by using -very- simple circuits, a very competent test receiver can be built using the most basic test gear. Even with only a good SWR meter and a little math thrown in, +/- Xj (reactance) measurements can be made (See http://www.qsl.net/n8xpv/ for information regarding "the 3 meter method" ).

One of my favorite resources for simple test equipment is Monty Northrup's (N5ESE} site: 73.......

Steve Smith WB6TNL "Snort Rosin"

From:

"solder smoke"

To:

"Steve Smith"

Great message Steve. Yea, I think the best troubleshooting tool is a real understanding of what is happening (or supposed to be happening) in the circuit and an ability to think logically about what could be causing the problem. Technical detective work. And indeed, that SWR bridge can tell you a lot.
73 Bill

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Test Gear/Workbench Maintenance

I mentioned in the last podcast that I was going to take a break from construction projects and spend a little time fixing up tools, test gear, and the work bench. First up was my old soldering gun. I bought this thing almost 40 years ago! It is pretty beat up, but I managed to patch it up and it now works fine. Even the original light bulb works.

I use this little AADE L/C meter a lot, but was having trouble getting parts across the test terminals. So I soldered alligator clips onto one of the parts connectors that came with the device. Makes testing easier.

Just a little audio oscillator. Puts out .2 volts at 713 Hz. Useful for testing the phone rigs.

I picked up this little Lafayette power supply at a hamfest and found it quite useful. But then I managed to knock the needle off the meter while fooling around with trivial electric motor. Any ideas on where I could get a replacement meter movement, or on what value I should use?

Here is a wave meter that I picked up at the Kemptom Park rally in London. Apparently at one point all UK radio amateurs were required to have one of these devices. I'm tempted to chop it up for parts. That variable cap with the reduction drive looks promising. And could that meter solve my problem with the power supply (above). If anyone can think of a reason to keep this as a wavemeter, please let me know.

Further proof of my extreme retro-ness. This is what I use as a signal generator. A Heathkit SG-6. Older than me!

This is my scope. HAMEG. Supposed to be good to 10 MHz but of course I can use it at higher freqs (which I do). I need to upgrade. Any suggestions?

A very useful little square wave generator.

I need to make more use of this noise bridge. Lots of potential here.

Obviously a London purchase. Very useful little AF sig generator from the UK's equivalent of Radio Shack. My only complaint: No auto-off. I forget to turn it off and run down the two 9 V batteries.

Long time listeners will remember this device. This is the one in which I soldered in the chip upside down. It works fine on th 5 Hz to 100 MHz range. Dead on the 4 - 600 MHz position.

I bought this power supply at the Kempton Rally, then converted it into a current limited supply using a chip and a circuit provided by Tony, G4WIF. My daughter Maria helped paint the cabinet. Lots of soul in this little machine.

Just three meters. The middle (analog one) is still very useful, and has considerable sentimental value for me -- my wife got if for me when we were back in the Dominican Republic.
My version of the W7ZOI power meter. Mike, KL7R, and I built versions of this device back in 2004 or so.
This is Cappuccio. He joins me in the shack most mornings. I'm not really a dog person, but I'm growing fond of him, even though he occasionally eats resistors and capacitors.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Homebrew Ferrari

Speaking of homebrew motors, a number of people sent me this YouTube video about another intrepid European with amazing workshop skills. Great stuff. (It reminded me of the title of one of Jean Shepherd's books: "Ferrari in the Bedroom.")

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

The Woz's Early Exposure to Electronics

Here is what I was trying to --- hic-- say about Steve Wozniak --hic-- in Podcast #139:

From "Steve Jobs" by Walter Isaacson:

"One of Steve Wozniak's first memories was going to his father's workplace on a weekend and being shown electronic parts, with his dad "putting them on a table with me so that I could play with them." He watched with fascination as his father tried to get a waveform line on a video screen to stay flat so that so that he could show that one of his circuit designs was working properly. "I could see that whatever my dad was doing, it was important and good." Woz, as he was known even then, would ask about the resistors and transistors lying around the house, and his father would pull out a blackboard to explain what they did. "He would explain what a resistor was doing all the way back to atoms and electrons. He explained how resistors worked when I was in the second grade, not by equations, but by having me picture it."

This is clearly the approach to electronics that we see in the book "From Atoms to Amperes" by F.A. Wilson.

Mike, KC7IT, gave Woz a new title "the uber-knack-master of all time":

Woz is the uber-knack-master of all time, and always has been in my book. His Apple II design is a work of genius in getting ten pounds of function out of five pounds of parts.

One of many examples: Apple II was the first personal computer to use DRAM memory chips, which were brand new then and kinda scary even for us pros. DRAMs store data as charges on tiny leaky capacitors. Every 20 milliseconds or so they have to be refreshed.

Everyone else had counters and logic just for refresh. Woz arranged the Apple II's display memory, so reading out the pixels to the TV screen 60 times per second did the refresh too, at no cost in circuits or performance. The elegant design of a pure knack genius.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Hiccups in SolderSmoke 139

First there was the whistling of my SSS sounds (a speech defect that I had been blissfully unaware of due to a nullifying case of tinnitus!) Then, in SolderSmoke 139 the long-suffering SolderSmoke listeners had to put up with hiccups. Yea, around 53 minutes into the show there began an annoying series of hiccups. Being an essentially analog kind of guy, I'm sort of pleased to point out that these are DIGITAL hiccups, apparently introduced by the Audacity software during the actual recording (not when I converted the show to mp3). I've been having more than my normal share of road-kill computer problems lately. The laptop I'm using to record the show ate a couple of the recent episodes before I had a chance to upload them (I had to do them over -- that's very frustrating). So this time I was recording the show on a thumb drive. Apparently it was filling up as we got close to the end, which led to the hiccups. The worst part was that a hiccup came just as I was delivering a key quote from The Woz. (I'll post it.)

If anyone has any gear laying around that might with these problems, please send it my way. Obviously I could use a bigger thumb drive. An external sound card might be nice. I could probably use another laptop also...

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

30% off on SolderSmoke, The Book. December 7

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm

Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke

Our Book Store: http://astore.amazon.com/contracross-20

Messaging ET (METI), and Silicon-based Life Forms

My fellow beacon fans will like this one. The ultimate (REALLY ultimate) beacon! http://www.newscientist.com/article/dn21236-lets-build-a-beacon-to-tell-aliens-who-we-were.html?page=1

And then there is this article about silicon-based life forms. (At first I thought they were talking about us!) http://www.universetoday.com/91449/why-silicon-based-aliens-would-rather-eat-our-cities-than-us-thoughts-on-non-carbon-astrobiology/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast #139

December 3, 2011

http://soldersmoke.com/soldersmoke139.mp3

Halloween, Thanksgiving, and Billy's Birthday (on the range!)

Astro-Knack: CCD camera in the telescope. Solar astronomy.

Winter approaches: Shack heating by Heath, Halli, Hammarlund and Drake.

2B troubles on 17 meters.

Rig Re-Cycling: Rebuilding 17 meter rigs from the last solar cycle.

Azores DSB re-build: Oscillator troubles then adding a JBOT.

Manhattan style construction and the need for urban renewal.

Book Review: Steve Jobs. (Woz has the Knack!)

MAILBAG

Our book: "SolderSmoke -- Global Adventures in Wireless
Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

An Inspirational Homebrew Motor from Spain

Bruce, KK0S, alerted me to this inspirational masterpiece from Spain. It is, as he points out, one of a number of really great videos about top level homebrew craftsmanship from Europe (remember the French homebrew tubes?).

Other comments from Bruce:
Did you notice that the calipers and micrometer this guy was using were seriously old-school. Totally manual readout. Not even a dial on that set of calipers! On top of that, his little lathe was manually fed. Notice in one of the shots, he is shown turning the cross slide feed wheel. No CNC anywhere. I can't be positive, but I don't think the lathe had a digital position readout either. This man is a machinist in the truest sense of the word. The Knack not only lives - it thrives!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Secret Listeners -- The Voluntary Interceptors

Jim, AL7RV, and several others sent me the link to this really interesting video about the British radio amateurs in WWII. Real "stiff upper lip" spirit in this video. Musn't grumble! Great stuff from Great Britain: http://www.eafa.org.uk/catalogue/5108

That regen receiver they showed looks a lot like the beast that I brought back from the UK with me. Once again, I am hearing the siren song of the diabolical regens....

Progress continues on my Indian-ized Azorean DSB transceiver (with JBOT amp). I now have the amp nicely stabilized (thank God!). Now I just need to get the output from the balanced mod close to the 1 mW PEP level needed by the amp. Should be done soon. And my cold seems to be going away, so maybe I'll be able to share my tales of JBOT derring-do in a podcast this weekend.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20