Micro-Shocks (and QRP Power?) from Nearby High Voltage Lines (video)

I spotted this on Hack-A-Day.  It caught my attention because many time, while riding my bike along the Washington and Old Dominion bike path, I have felt electrical shocks from the handlebars. 
Now, before you all conclude that OM Bill is losing it and start suggesting that I wear an aluminum foil hat, realize that the bike path is directly under some seriously high voltage power lines.  And that esteemed UK newspaper "The Daily Mail"  confirms that these shocks are, as the kids say, a thing.
http://www.dailymail.co.uk/news/article-2655190/Cyclist-told-grab-metal-bike-time-rides-overhead-power-line-gives-ELECTRIC-SHOCK.html
So think these Russian dudes are onto something.  How long will it be before the QRP community starts exploiting this power source?   (Please be careful about where you put the antenna!)

Another Thermatron Receiver (video)

Thanks to Steve N8NM for sending this along.   He said it seems to be crying out for a synthesized VFO -- I disagree,of course. 

I like the filter arrangement -- one crystal at 455 kHz,  two tune-able IF cans and a phasing control.  This seems like a good way to get both AM selectivity (broad) while still having the ability to narrow the bandpass for SSB. 

The builder did a great job. Does anyone know who he is? 

The Soul of the Old Machine

I continue to peruse the stack of Electric Radio magazines that Armand WA1UQO gave me last month.   Great stuff.  I'm really struck by how much of our ham radio history is captured in the pages of ER... and nowhere else.  This is a resource that should be protected.

In the last podcast I shared a few lines from the "Amateur Radio SSB -- The First Fifty Years" series or articles.  Today at lunch time I was reading the March 1994 issue, there was an article by Don Meadows N6DM entitled "A Homebrew CW Receiver."  From the last paragraph:

"This homebrew receiver as the main station receiver until 1975... In 1989 the homebrew receiver was finally mothballed... In its place I acquired an imported box that does everything.  This box is friendly and cooperative, but I have no rapport with its soul. When it ultimately falters, it will need to be cured in the manufacturers sanitarium for sick gear instead of on my own workbench.

I've always been proud of this homebrew receiver. It did its job exceedingly well. Retrieving recently this old friend from storage for photographs, cleaning out the dust and dead insects, inspecting its wiring up close --  all this evoked fond memories."

Stepping Inside an AM Transmitter (video)

Very cool video.  We have visited VE7ZWZ's amazing shack before. This time he takes us inside a BIG commercial AM transmitter that he has modified for use on the amateur bands.

I know that he had the plate voltage turned off, but I still felt myself cringing when he reached up to touch the plate connectors on those enormous thermatrons.  The filaments were on, adding to my unease.  Dude, don't do that! And if you are standing INSIDE the transmitter, keeping one hand behind your back might not be as beneficial as it normally would be.

His comments on his VFO were interesting.  I was kind of disappointed that he went with a varactor circuit.  A varactor?   Amidst all those bread slicer variable caps?  It just doesn't seem right.  (And BTW they are bread slicers, NOT "potato slicers.")  But I kind of liked the heater--thermistor--insulation set up that keeps the VFO at constant temperature.

I thought it was interesting that these transmitters were kept on, with the tubes glowing for years at a time.

Thanks Mr. Carlson, for another great video! 

Very Useful Toroid Info Web Site

This site provides the kind of info we need when working with toroids.  It even tells you the length of wire to cut. It links to the W8DIZ "Toroid King" website, but I can't really tell if this site is the work of DIZ himself.   In any case, very useful.  We award this site our coveted rating of "Five Soldering Irons."

http://toroids.info/FT37-43.php

Video of a REAL Homebrew QRP Contact (by WU2D)

I think Mike's video does a good job of showing what it is really like to get on the air with simple, homebrew QRP gear.   It takes some patience and operating skill.  I guess it is sort of like fly fishing (with home made lures); there are easier ways to catch fish, but they are not as rewarding.   

Discrete Dead-Bug O'scope Pong

Thanks to Bent KD0GLS for alerting us to this excellent example of the awesome power of discrete transistors and dead--bug construction.

Check it out.  There is a video.

https://www.eevblog.com/forum/projects/oscilloscope-pong-for-1-or-2-players/

Another Excellent QRP Video from WU2D -- Retro Solid State QRP Receivers

Hot Water BITX 40

Fred's idea really resonated with me.   My first SSB rig was an HW-32A, the 20 meter version of the rig shown above.  If -- as I suspect -- these rigs are anything like the HW-101, they are not aging well. Heath's drive for economy resulted in rigs that don't hold up to well over time. I remember the sound of the  plastic HW-101 dial clutch cracking when I pushed the button.

BITX40 Modules to the rescue! Put a mono-band board inside an old mono-band rig.   There are a lot of possibility here.  Some ideas:

-- Put that Heath VFO to use.  Maybe convert it to solid state.  Or just put the LCD from an Si5351 in the window (Pete did this with an HW-101).

-- Get the S-Meter wiggling.  

-- Keep the final amplifier circuitry in there and let the BITX drive it.  This will give you a QRO option.  (Uh oh, we're in trouble again!)   

Hello Fellows,

Attached is a picture of my BITX-40 V3 adapted to a Heath kit Single Bander HW22. This is a work in progress but what a neat way to bring an old boat anchor into the present.

 

The only parts of the HW 22 used were the front panel and case and knobs. Modifications yet to be  incorporated include: AGC , a USB port on the front panel to access the Arduino, and a PTT/CW mode switch.

 

I enjoy your pod cast and web site…Best of 73 KC5RT.

Hearing the Roosters from Boa Vista, Brazil

The ham radio day got off to a good start at N2CQR yesterday.  40 meters was open in the morning and PV8AL was calling CQ.  Helio had a strong signal, due in large part to his 3 element 40 meter yagi.   Helio lives on a farm outside Boa Vista,  Brazil. As he spoke, I could clearly hear the roosters crowing in the Amazonian dawn.  Very cool.  It brought me back to mornings in the Dominican Republic, and in Central America. It also reminded me of one of my first DSB contacts from the Azores -- I could hear the parakeets of Amadeu CT2HGL in Coimbra, Continental Portugal.  Obrigado Helio!  Obrigado Amadeu!

Fast Radio Bursts and the Molonglo Radio Telescope (with video)

7,744 circular dipoles on 843 MHz  feeding 176 preamplifiers and 88 IF amplifiers!

Read about how the Molonglo Radio Telescope has recently been used to study the mysterious Fast Radio Bursts:
http://www.sciencealert.com/confirmed-mysterious-radio-bursts-detected-by-astronomers-really-are-coming-from-outer-space

There is a Grote Reber connection:
https://en.wikipedia.org/wiki/Molonglo_Observatory_Synthesis_Telescope

SolderSmoke Podcast #195: (We need some help!) BITX, 60, SSB History, Tribal Socketry

SENDING IT BACK

SolderSmoke Podcast #195 is available.  Link appears below (scroll down)

We’ve got a problem:   Pete Juliano and the QRP Hall of Fame  :-(  PLEASE HELP!

BENCH REPORTS

Pete Releases Smoke (wiring harness)

Pete's DifX on 60

Architecture and Dual Conversion (uBITX:   uses ALL THREE clocks on the Si5351)

The Big Kahuna

ON HACKADAY with Philco SB100 SEE!  QRP!!!!!

BITX60

Cap Stack Hack mod (with leads)

Let the smoke out of an Si5351 (shorted output) Several actually.

(Same day delivery zone for Amazon -- but no drones or parachutes yet.)

Installed scanning switch

Observations on 60.  All the weird bands have a 6 in them: 160, 60, 6

The good:  100 watt limit, wire antennas 
The bad:  Kind of cliquish-- like 75, not much of a CQ band.  Channels.  Not much activity.

Met Josh KE8CPD on 40.  BITX 40!

TRIBAL KNOWLEDGE:

Socketry:  How to keep BNC jacks from spinning loose?

Do you heat shrink?

Feel Tech Sig Gen might not have blocking cap at the output.

Speaking of which, when I spoke of the Ne602, I mostly meant blocking caps, not bypass caps.

How come they don't have a cable TV channel devoted to radios?  They have HGTV? Why not HBTV?

REPORT FROM WINTERFEST

Bad weather.  Tailgaters wimped out!

Combined forces with Armand WA1UQO.

Met up with Charles AI4OT.

Acquisitions:  1/4 phono jacks, carbon mic, vero board, disc caps, weather radio,

LARGE collection of Electric Radios from Armand.  Wow.

Electric Radio notes:   1st Fifty Years of Sideband 1991 articles by Jim Musgrove K5BZH

Why LSB on 75? -- so AMers couldn't follow to top of band

W2, W6, W8s liked phasing, W3, W4, W0 more into filter rigs.

Early SSB guys turning on carrier and talking AM hams into SSB RX.

Kelvinator Refrigerator rigs.

A reading on the homebrewing of SSB rigs.

Tony Fishpool on QSO Today!  Pete mentioned prominently.

Good Hacks from ND6T on BITXHacks,   Stockton Bridge

MAILBAG

LINK:  http://soldersmoke.com/soldersmoke195.mp3