Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, May 6, 2017

SolderSmoke Podcast #196 Rockets, Pete's EXPULSION, SDR, DiFX, '602 rigs, T.O.M.

View from rocket. I'm in front of the swing-set, with hat on. Billy to my left.

SolderSmoke Podcast #196 is available.
5 May 2017
http://soldersmoke.com/soldersmoke196.mp3

Shenandoah Rocket Launch -- With video!



Pete and the QRPARCI HOF: We thank you for your support! 
Note the strange seasonality of these kinds of events... Always in the Springtime...
April is the cruelest month. Especially the FIRST DAY!  

Feel Tech Follow-up -- the DC blocking cap issue.

HBTV?  Roku Challenge? 

A tube of Desitin?  Why?


SDR Misadventures. 
SDR on a tablet  Just like WA7HRG
Pi Day   More RaspPi Linux observations  TOO HARD
The problem of Si5351 and updated libraries -- old sketches don't work!
My SDR question: If we go with direct sampling, no need for I and Q at front end  No image problem, right?  But why is there often a digital I and Q in the direct sampling receivers?

BITX MODULE
Getting RF in through the DDS jack.

Electric Radio:  Reading from the history of SSB.  And from the T.O.M. article
Joe Carr K4IPV : Homebrew Hero from Falls Church Va.  Any more info on him?

Pete's newest DifX
Pete's new digital scope.

Bill's NE602 RIG, Epiphyte History.
He put AADE crystal filter impedance match circuits in backward  That's why he needed RF amp. Duh.
The perils of a crowded box 
Building RF amp board (BITX Module design) for the NE602 rig.
NE602s do not put out a lot of power. uW
BITX Module Amp circuits very stable.
Chassis as the heat sink.
Mic amp?  We don't need no stinkin' mic amp!  But yes, we do. 741 on the way.

Parts on e-bay very expensive!  Back to the hamfests. On to Manassas!


Congrats to Tony Fishpool G4WIF, who received the Don Cameron, G4STT, Award for an outstanding contribution to low power amateur radio at the RSGB AGM meeting in Cardiff.

MAILBAG

Friday, May 5, 2017

Rocket Key-Chain Camera Video!


This project started almost 5 years ago when Billy, his friend Ben and I built a nice BIG Estes Model Rocket that Elisa had bought me for my birthday.  Here is the original post about this:
http://soldersmoke.blogspot.com/2012/09/video-model-rocketry.html

Building the thing was no problem, but finding a place to launch it was.  Model rocket launches are prohibited inside the Washington DC beltway, and when you get outside the beltway it is hard to find a suitable open field. Out rocket camera sat in a box.  We said "someday" for five years.

Yesterday I was going out to the Shenandoah Valley of Virginia picking up Billy after the completion of his freshman year in college.  I decided that yesterday would be the day.  I used Google Maps to look for places with a big open field near the highway.  I recharged the key chain camera.

At the first of my possible launch sites we found lots of fields, but also lots of fences, and cows and horses who might not like our noisy rocket.  We were about to give up hope when I spotted a farmer at work.  I explained the situation to Randy.  He agreed to let us launch, but wanted us to do it from his nearby house so that his family could watch.  This was very nice of them.

After one failed attempt, WHOOOSH!  That D12-3 engine really pushed that thing up there!  The family loved it.   It was  great.  The parachute deployed perfectly.  Billy would run across the field to retrieve the rocket (you can see him running up to get it in one of the attached videos).  When we got home I was amazed to find that the little camera had worked perfectly on all three launches. 

The Waters Edge Rocket Research Society would be so proud of us.  VIVA LA WERRS! VIVA!

Monday, May 1, 2017

Color Code Violation -- Almost as Bad as Breaking Ohm's Law!


A cautionary tale:   How would you read the color code on that little resistor?    It was plucked from a strip marked 2.2 ohms.   And indeed it is red-red-gold.  2.2 ohms, right?   But no,  my friends. On the DVM it reads 2.2 kilo ohms.  2200 ohms.  Believe me, that makes a big difference when it is in the Vcc line of your driver!  It took me a while to find out WHY that driver wasn't driving very well.  

This turned out to be one of those very satisfying trouble-shoots --  the problem was elusive and it wasn't all my fault.  But I should have MEASURED the resistor value before soldering it in. 

Here is the scary part:  The next resistor from the same strip was marked the same way, but measured 2.2 ohms.  Be careful out there. 

Saturday, April 29, 2017

How LCD Displays Work (Video)



8 Bit Guy does a great job de-mystifying the LCD displays that we have been using.

Friday, April 28, 2017

An Old but Cool DiFX: The Epiphyte



I've been hearing about this rig for many years.   It first appeared in the September 1994 issue of QRPp, the journal of the NORCAL QRP club. A condensed version of that article appeared in SPRAT 81 (Winter 94-95). The designer is Derry Spittle VE7QK from Vancouver, British Columbia.

The name always puzzled me.  Here is the explanation:  It started with the Neophyte: A very simple direct conversion receiver that many of us built.  The Neophyte was mostly an NE602 and an LM386.  In the Epiphyte, a crystal filter and a second NE602 were added, turning the Neophytes into a superhet receiver and -- with some additional circuitry -- an SSB transceiver.  The Oxford English Dictionary reportedly defines an Epiphyte as "a plant that grows on another plant"(see picture below).   The Epiphyte grew out of the Neophyte.

And this plant grew in British Columbia, which seems -- like Australia and New Zealand -- to be fertile ground for simple phone rigs.  I'm pretty sure the "Wee Willy" DSB rig also came out of BC, and it may have had a similar purpose:   allowing for portable contact with the BC Public Service Net on 75 Meters.  

There are many features of the Epiphyte that I like:  There is a simple 455 kHz filter and a ceramic resonator BFO/Carrier oscillator. The original design featured a VXO-like circuit using a ceramic resonator at 4.19 MHz.  And it ran off AA batteries (as did the NE602 DSB rig I took to the Dominican Republic).

Unlike my NE602 rig, the Epiphyte made an artful use of the fact that NE602's can be set up to have TWO inputs and TWO outputs.  Where I used DPDT relays to switch inputs and outputs from both NE602s,  OM Spittle left all the inputs and outputs connected, and simply switched the VFO and BFO signals.  Ingenious.  

There were updates and improvements.  The Epiphyte 2 and 3 featured increased power out (5 watts vs. 1 Watt).  Version 3 has an IRF-510 in the final, driven by a CA3020A chip.  That chip is capable of 70 db gain.  Wow. 

In 1996 NORCAL and G-QRP donated 50 EP-2 kits to radio amateurs in third world countries. Very nice.

In 2000 NORCAL did a kit of the EP-3 -- it sold out in 24 hours.  Here is a nice article on the EP-3:
http://www.norcalqrp.org/files/Epiphyte3Mnl.pdf

And above we have a video from Japan of an EP-3 in action.



Wednesday, April 26, 2017

Video (Audio) of N2CQR (me) on 40 Meters with BITX DIGI-TIA



This was the icing on the cake.  Ruben AC2RJ up in New York was monitoring as I called CQ with my BITX Digi-Tia last night on 40 meters.  He recorded the contacts that ensued.  I was really glad that he recorded VE3XBO describing his experiences with a BITX 40 Module at his local radio club -- The WAX Group of the Barrie Radio Club in Ontario. 

Farhan's module is really starting to show up more often on the band. On the 19th of April I talked to Bruce KC1FSZ -- he was on his Peppermint Bark BITX 40.  And on March 30 I talked to Josh KE8CPD on his BITX 40.

Click on the arrow (above) to listen to Ruben's recording.  Ruben has a nice YouTube channel here:
https://www.youtube.com/channel/UCXClX_GBzFQIiqTwgnt8qxA

Sunday, April 23, 2017

DiFX! My New NE602 Rig is On the Air


Pete would call this a DiFX:  a transceiver that is Different from a BITX.  This started with my effort to get an Si5351 working with a little 1 inch square OLED screen.  Tom Hall AK2B helped me with the software (thanks Tom). Once I got that done, I figured I could build a simple receiver with a homebrew 11 MHz crystal filter, two NE602 chips, and an LM386 AF amplifier.  That was working great, then Pete told me to turn it into a transceiver.  I used some of Pete's boards (thanks Pete).  

The Epiphyte transceivers also use two NE602's, but they ingeniously switch the BFO and VFO between the two chips.  I didn't switch the oscillators -- instead I switched the inputs and outputs of the two chips using two DPDT relays (thanks Jim).  A third DPDT relay switches the antenna between T and R, and turns on and off the PA stage and the AF amplifier.

This is a DIFX, but there is some BITX circuitry in there.  The power amplifier stages are right out of the BITX Module, as is the AF amplifier (thank again Farhan).

The only real problem I ran into had to do with the very low power out of the NE602 VFO mixer on transmit and the impedance matching between the NE602 and the PA chain.  I had to increase the gain on the first RF amp (pre-driver) using ideas from Steve Weber's 40 meter SSB CW QST contest rig (thanks Steve).  I experimented with various connections between the NE602 and the BP filter.  Finally I got it going.

The heat sink on this one is different too:  it is just the chassis.   The IRF 510 is bolted (insulated) to the aluminum box.

I fired it up this afternoon and in spite of horrible conditions on 40, quickly had a nice rag chew with KJ4ZMV in Indiana.  I haven't even built a mic amp yet!  I am running the D-104 right into the NE602 balance modulator.  There are no signs of unwanted modulation or spurs.

FB!   TRGHS!   VIVE LA DIFFERENCE!


  
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column