Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, December 29, 2019

KK4DAS Michigan Mighty Mite Heard by WEB SDRs -- CBLA Mobilized!



Dean KK4DAS continues to do great things with his Michigan Mighty Mite.  He has been calling CQ on the Color Burst Liberation Army (CBLA) frequency of 3579 kHz.  I think I was the first one to hear him, but since that memorable moment he has been picked up by multiple Web SDR receivers, including the one at Penn State (PETE JULIANO'S ALMA MATER!)  (screen shot above, listen by clicking URL below).  He has also been heard by Web SDRs in Concord Mass,  Newport News Va, and Cleveland, Ohio.  FB Dean.  

So come on folks -- this is a mobilization call for the CBLA!  Get those MMMs on the air.  Send us reports and recordings from Web SDRs or the RBN. 

Listen to Dean's MMM as received at the Penn State Web SDR: 


It sounds great!  And nice CW Dean!  





Wednesday, December 25, 2019

Santa Came to SolderSmoke! From Australia!


Oh wow!  Santa Claus made a really long distance DX trip to SolderSmoke's East Coast HQ last night.   His chief Elf this time was Peter VK2EMU who crafted the AMAZING Morse key you see in these pictures.  This is truly a work of art.  I will indeed put it on the air with a homebrew transmitter.  And we will keep on soldersmoking.  

Thanks very much Peter.  This was really great.  

Merry Christmas to all!  


Sunday, December 22, 2019

Dean KK4DAS Puts Michigan Mighty Mite on the air! And is heard in Falls Church, Virginia! (video)



QRZ.com says we are 5.9 miles away.   The U.S. Postal Service almost prevented this from happening -- they objected to my just putting the crystal in an envelope and mailing it.  Dean's wife had to pay postage due.   

The rig didn't work at first, but Pete N6QW provided sage advice and tribal knowledge.  Adjustments were made and Dean experienced the Joy of Oscillation.  Then, he connected an antenna and was heard at the SolderSmoke East Coast HQ. 

Obviously the beret was the key to Dean's success: 


This was a lot of fun.   And it is a reminder of the power of the MMM.   Dust off those Mighty Mites!  Call CQ and see if you can be picked up by the Reverse Beacon Network.  Let us know if you succeed.   
Getting ready


Done!  Dean's MMM


Saturday, December 21, 2019

SolderSmoke Podcast #216 Is Available: BITXs, Paesano, Paraset, ET2, Antuino, Mailbag

Bill's uBITX with HB keys and the mic that used to be the podcast mic! 
SolderSmoke Podcast #216 is available 

21 December 2019

HAPPY HOLIDAYS TO ALL! 

http://soldersmoke.com/soldersmoke216.mp3

Pete's Bench 
Sprat Article
BITX 40 Fun
ZL2BMI Rig
Paraset.   Three tubes!  Almost an ET-3!

Bill's Bench
ET-2 Adventure over,  Rig on the wall
Final QSO count. 20   3 "random" 
Last QSO with AA8OZ
Lessons learned:  100 mW not the problem. Crystal Control cramps your style. 
N0WVA regen amazingly effective.
Tried for the Sunrise Net.  Walter sent me some crystals.  

On to the uBITX. 
Accidentally wiped out calibration and BFO settings. 
Had to do recalibration and reset BFO. 
Learned a lot about the rig. 
How they did CW and how they do it now. Shift TX?  Or shift RX?  Or just shift BFO on RX? 
How all the signals end up as upper sideband.  Only one BFO freq.  Very cool. 
TalentCell 12 V Lithium Ion 3 AmpHour battery. Size of a deck of cards. 
Inspired by Peregrino -- I ordered EFHW Tuner from QRP Guys. 
Homebrew Straight Keys

Antuino upgrade 
SMT soldering. 
Back to Arduino Nano and the IDE.  
A very cool tool. 
Antuino filter analysis.
Version 6 of uBITX out. 

The "Watt Meter" DC power meter.  Very useful.  8 bucks.  LINK:
https://www.ebay.com/itm/Digital-DC-combo-Meter-LCD-Watt-Power-Volt-Amp-RC-Battery-charging-Analyzer-M/152339793114?fbclid=IwAR0u9SlZi2Dm6zOJyZt4fDTu7w_pjBIEYD_FiNfLymxtQUbMjcNHjfB17P0

SPRAT, balloons and hardcore homebrew hydrogen. 

MAILBAG
VK3HN's AM receiver.  I ordered 6kHz 455 kHz filters from Australia. 
Dean's MMM
Peter VK2EMU   Hertz not hertz. 
Ben KC9DLM LTSpice YouTube Videos
Steve Silverman  Electroluminescent Receiver Kit
Lyndon N0LFX back to listening.  FB OM
Steve M0KOV built a pill bottle variometer.  Did you get the regen going? 
Anthony VU3JVX   FB HB uBitx.  
Allison KB1GMX  Great to hear from her
Leif WB9IWT -- helped me trouble shoot my uBITX (BFO was low)
Mike EI0CL  old buddy from Azores days.  Recognized his voice on 20.  Great QSO.  

Monday, December 16, 2019

YouTube LTSpice Tutorials

For those who want to get started in circuit simulation, or to improve your use of the LTSpice program:

https://www.youtube.com/playlist?list=PLT84nve2j1g_wgGcm0Bv3K4RSl2Jdjsey

And this one for the inductor:

https://www.youtube.com/watch?v=65fNDRows90&feature=youtu.be

Thanks to Ben  KC9DLM for alerting us to this.

Sunday, December 15, 2019

Hangin' it up (the ET-2)


My ET-2 minimalist QRP CW adventure is (for now) officially over.   I have taken the rig - festooned with the callsigns of all the stations I contacted -- and have put it up on the wall.  This may be a new form of art.  I think I am the first radio amateur to do this.  I think it is pretty cool. 

Here are the stats:   I made 20 contacts with the rig. I had it on the air from 12 October 2019 to 7 December 2019.    Seventeen of the contacts were the result of my posting pleas for help on the SKCC Sked page and/or the Summit DX page.  Three of the contacts were completely random. One station -- W1PID -- provided four of the contacts.  Thanks Jim. 

My power out was usually around 100 milliwatts.  I used either a 40 meter coax fed dipole or a 135 foot doublet fed with window line. 

My best distances were Wisconsin and Georgia. 

Crystal control was the real limiting factor.  100 milliwatts didn't seem to be much of an impediment. The most amazing thing about this rig is the N0WVA regen receiver.  It took a lot of peaking and tweaking, and it took some skill to operate. but once I got it going it was an amazingly good receiver.  Really Amazing for just ONE J-310 FET. 

The last contact was really nice.  I was calling CQ and AA8OZ came back.  He was in a cabin on a trip with some scouts.  He too was on a wire antenna.  He was one of those guys who said WOW! when I told him about the rig.  We had a nice long conversation on 40.  It was a great way to wrap up the ET-2 adventure. 

Thanks to all who helped me make contacts and for all those who tried to work me. Thanks to N0WVA for the regen inspiration. And thanks to Glen Yingling W2UW (SK) for the ET-1 idea. 

The rig is standing by.  On the wall.  Perhaps it will return to service, maybe during solar max. 




Saturday, December 14, 2019

Farhan's New uBITX Version 6!



I'm currently reviving my "version 3" uBITX and putting it on CW.  It sounds and works great, but when I saw this I realized that I am falling behind.    

Farhan wrote: 

Here is what it looks like :
And of course, yoiu can buy it on hfsignals.com. The shipping will happen from Tuesday onwards. We have a limited supply of the first 200 boards. The rest is for after christmas.

The most important thing about this revision is that the  Radio circuitry is almost unchanged. We have incorporated the connectors on the PCBs. So, this kit needs none of the confusing soldering. You snap in the TFT Raduino onto the main board, plug the power and antenna from the back, snap on headphones, plug in the mic (supplied with the kit) and off you go!

It is offered in two kits now : The basic kit (150 USD) is without the box (like old times) but with a microphone and two acrylic templates for the front and back panels. 
The Full kit (199 USD) has the box with speaker, mounting hardware etc. Both are described on the website. 

Now, about the TFT display: 

For those who are using the 16x2 display and you would like to upgrade, you will have to do three things:
1. Add a heatsink to the 7805 of the raduino
3. Grab the new Arduino sketch from https://github.com/afarhan/ubitxv6

Background : 
I have been hacking away at adding a TFT display for the Arduino for sometime. Finally, I managed to do this with a really inexpensive 2.8 inch TFT display that uses a controller called the ILI9341. The display update is slow but, clever guy that I am, the display very usable. it uses the same pins that earlier connected to the 16x2 LCD display. This display is available everywhere for a few dollars. 
_._,_._,_

Friday, December 13, 2019

Crystals -- Old and New and World War Two


I was watching Greg Charvat's great video about the WWII ARC-5 receiver yesterday. Greg admonished all of us to preserve any WWII gear we might have in our shacks.  Just one day earlier I had found the crystal pictured above in my junk box.   There is some old stuff floating around in here! I will preserve this one. 

Speaking of crystals,  Walter KA4KXX recently sent me some 40 meter crystals for use with my ET-2 transceiver.  Walter suggested that I use them to check into the daily (1300Z) Sunrise Net on 7123 kHz.  These were modern "short" computer crystals.  So I put them into FT-243 and FT-241 holders.  (Don't worry Greg, no WWII gear was destroyed in the process).  It was kind of fun to put the new rocks in old boxes. They work just fine in the ET-2.  Thanks again Walter! 



Finally, Chris KD4PBJ has been helping a buddy of his buy a Drake 2B.   This morning Chris asked about the E Crystal adjustment coil on the back of the Drake.  I told him that was to allow the use of "overtone" crystals.  But, sadly, I advised him not to worry about it too much because the days of ordering bespoke crystals (overtone or otherwise) are behind us. 

Thursday, December 12, 2019

VU3JVX's Beautiful Homebrew Scratch-built uBITX


When Farhan announced that BITX40 Module boards would no longer be produced,  my first thought was that it is, of course, still possible to homebrew a BITX.  Anthony VU3JVX proves that in his wonderful description of his uBITX scratch-built homebrew project.  Anthony obviously learned a lot  -- perhaps the most important lesson for new homebrewers is what Anthony did when he couldn't get the receiver to work: HE TOOK A BREAK and went back after a few days.  That is very important. 

I also liked very much the fact that Anthony did what Farhan did when the receiver came to life -- he stopped building the transmitter and just listened to the receiver that he had built. FB OM.  

And three cheers for Anthony's XYL -- she was very wise to suggest that he take on a project like this when he found himself out of work.  


Anthony VU3JVX wrote: 

I would like to share my journey of building ubitx from scratch, I would also like to dedicate this to Farhan (hope he will read this sometime) as he has always motivated to homebrew stuff.

I got my license 'VU3JVX' on March 2017. Passing the exam and getting on HF bands is still two different things. Yes, I started to transmit to local VHF repeater with cheap Chinese Bafong radio, I believe the most economical way to start the ham operator experience. However, I knew that I am missing something since I was not able to operate on HF bands.Coincidentally I saw that bitx40 became available as kit from HF Signals during the same time. I was happy to try it and that's how I made my first HF rig. Then I came to know about the BITX20 forum and joined the same, one of the best thing I did after buying bitx40. I have learned a lot from all the great people caring and sharing information. I will try to contribute whatever way possible from my side in coming days.

I was already thinking of building bitx40 for other band (because the way Farhan Sir has drawn the schematic it becomes so tempting for DIY) and then ubitx happened and it changed everything. I started studying the ubitx circuit and collecting all the required components, even ordered the exact toroid from W8DIZ website (during my good days and travel to US) but I was not having enough time to put things together on the bench as I am by profession a computer network & security engineer.  I was not sure what to do next, during this time my XYL suggested me that why don't I focus on something which I always wanted to do. And that's how my journey started to build the ubitx from scratch.

Honestly, I was not sure if this was the right time to start this project. So I started to work on building the receiver segment of ubitx only. I had my challenges during this time and at one point I thought I made a wrong choice of building ubitx, instead I should had tried the bitx40 circuit first. I was almost on the verge to pack up and shelf the project because I was not able to hear anything from the receiver itself forget about building the transmitter. Then took a break for few days and then started troubleshooting each segment one by one. Finally I found it after reading through the bitx20 forum that my Q70 to be defective then I also came to know that is it better to replace it with audio type transistor 2sc945.
I believe during this process I have read most of the content on bitx20 forum. Some name which repeatedly comes to my mind are Raj (vu2zap), Allison, Jerry and thanks to all other hams out there. I had all the version schematics but started my work based on V5 and wanted to get the best out of all the version so I kept the build approach modular and laying them almost like the schematic for easy troubleshooting (you can see those pic on my qrz page).

Next challenge was trying to be too good student and follow everything the master said (pun intended). I made a cocktail of 12 Mhz with 11.059 Mhz crystal filter (Farhan Sir I believe the schematic is still showing X7 as 12 Mhz) and after changing the X7 to 11.059 Mhz I was able to see the radio signal making it through the crystal filter, then came the next hurdle of fine tuning the USB and LSB and fiddling with the software for the right value. After the receiver started working I took a break from building the radio and started enjoying the receiver and checking all bands. One evening I narrowly missed Farhan ji on air but anyway I would not have been able to communicate with him since my ubitx transmitter was not ready.
After that day I thought of building the ubitx transmitter soon. I was quiet confident about the transmitter build by this time and thought it should be straight forward. Logically yes it should had been that way but I was so wrong. Following all the recommendation from the forum about harmonic issue and how to avoid them I started building the BPF. Then I started to work on the PA section then came tuning the IRF510 current (I call it "Bell the cat moment") luckily I never blew any IRF510. However, the output watt on 40 M was hardly 2-3 Watts and other higher band less than 1 Watt. I knew something was wrong with those MOSFET but out of circuit the test look normal. I had some other stock from different source even those performed the same. Played around with different PA transformer settings and checking/tracing the RF signal. Everything looked normal till IRF510. Chances of fake IRF510 is less (as debated on the forum) as it is not an expensive RF part like RD16HHF1. Now I was confused, I had some spare new RD16HHF1 which I got online, which I was not very hopeful thinking that it might be fake. I thought of giving it a try (pin layout configuration was easy for me as I have taken the island cutting approach on single side copper board).

Voila ! I got a whopping 10+ Watt 40M, 5W on 20, 10W on 17M, 10W on 15M, 5W on 12M and 10M. Yes there are lot of fake IRF510 out there. Now it was time to test the homebrew rig on air, checked in at evening into All India Net and got 59 report and the net controller thought I am using commercial rig. Finally during these difficult time in my personal life I was able to smile and sleep well that day. The icing on the cake was installing the Nextion 3.5 display (If I remember correctly this is single most expensive component in the radio and thankfully it is optional).

Does that mean everything is 100% with my home brew ubitx ? Nope, I am still trying to figure out the feedback issue from the speaker during transmit. I traced the issue and found the audio leaking from emitter of Q6. I would like to mention that I tried all the audio circuit and finally settle for TDA2822 circuit. However, the issue is still there during transmit so I have made the audio circuit offline during transmit, I know this will impact my CW listening while transmitting when I upgrade my license . I have exhausted all solutions from Bitx20 forum but still no luck. I would be happy is someone can point me to the right direction. I would be also happy to share any information related to my build or the software settings/tuning, yes I like programming especially 'C' so I am comfortable with Arduino programs. I am thinking of building another PA module with IRF510, I personally feel IRF510 (I got the original finally) has made the home brewing so interesting. 




Anthony VU3JVX



NOAA Prediction for Solar Cycle 25



A peak sunspot number of 115 might seem paltry, until you remember that we are at ZERO now. 

https://www.swpc.noaa.gov/news/solar-cycle-25-forecast-update

Wednesday, December 11, 2019

Antuino Filter Analysis



Farhan had given me one of the early Dayton Hamvention models of the Antuino SWR/PWR/SNA RF test lab.  He later identified the need for a few mods to improve performance on that early model.  So I brushed up on my surface mount soldering, got the needed (tiny!) parts and made the mods.  I also put the battery pack inside the box and put some feet on the Antuino cabinet (it just seemed like the right thing to do). 

Antuino has already proven to be very useful as an SWR analyzer.  I know have a much better understanding of the SWR bandwidth of my wire antennas. 

And it is very useful in evaluating the passbands of filters.  I had an old 11.273 MHz filter from an old CB radio in my junk box.  I have no specs on this device -- I didn't know what impedances it was designed for.   So it was time for some Antuino technical detective work. 

First, take a look at the filter with nothing between it and the Antuino.  Input and output on the Antuino are 50 ohms, so here is what the passband looked like with 50 ohms: 


Next I put in two 47 ohm resistors, one in series with the input, the other in series with the output.  Antuino connected at the other side of each resistor.  Here is what it looked like.  Note the improvement in skirt shape.  But there is still a lot of ripple in the passband: 


Then I went to 100 ohms.   The passband ripple was reduced noticeably: 


Then up to 330 ohms.  Here the passband doesn't seem quite as flat as it was with 100 ohms: 


Finally, 1000 ohms.  Definitely too much.  Note the ripple. 
 

Farhan prefers the passband with the 100 ohm resistors.  I agree.  

BTW the filter is from TEW of Tokyo, Japan.  Model FEC-113-2  11.2735 MHz  No. 2   A    2
It had three crystals on the board with it:  11.275 and 11.272 -- these are obviously for LSB and USB.    The third crystal is at 11.730 MHz, indicating to me that they had a second IF of 455 kHz in this rig.   If I use it, I think I'd stay with single conversion. At 11.273 MHz the filter is of ideal passband width for SSB.  I do feel the urge to build something around this filter. 

Doing the mods on the Antuino was fun, and having worked on the device at least a little bit I feel more of a connection to it. 



Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column