Podcasting since 2005! Listen to Latest SolderSmoke

Saturday, February 29, 2020

How to Measure Output Impedance (video)



Thanks to Tony Fishpool G4WIF for alerting us to this very useful video by Alan Wolke W2AEW. 

Alan's video channel is a real treasure-trove for homebrewers.  

It was very cool to see "AEW" inscribed on the function generator that Alan built 30 years ago. 

Be sure to stay to the end of this video for some electronics humor from Alan.  (Steve Silverman:  Take note -- we might want to add this to the lexicon.) 

Now I'm going to search Alan's YouTube channel for a video on how to measure input impedance. 

Thursday, February 27, 2020

From a Student of C.F. Rockey, W9SCH

C.F. Rockey W9SCH

We have discussed the monumental work of C.F. Rockey, W9SCH, SK before.  Yesterday a comment appeared under that post that is just too good to leave buried in the comments.  It appears below.   Jeff's comment also caused me to dig up my small collection of "The Five-Watter" issues from the Michigan QRP Club.  Rockey wrote a column for that magazine.  It contains a lot of tribal knowledge.  Here is Jeff's look back:  


This turned up for me in a Google search for "Charles Rockey QRP ARRL" during a phone call with a friend of mine who was bemoaning that he never got a novice license because he could not master Morse code (he is in his mid-60s, as am I). I was taken back to the communications electronics class I had my freshman year at New Trier East in Winnetka (not Wilmette) IL in 1971. That class was taught by none other than C.F. Rockey, known to us students as The Rock. I think about him fairly often because I grew up to become a very hands-on engineer and can recall parts of his class quite clearly, even at this remove. Somewhere I still have the reports we had to write (typed on a typewriter) each week. He was a huge influence on me and I was saddened to have his passing undeniably confirmed for me. I have the little chemistry book he authored beside me now *Electrons, Atoms and The World* and am glad to be able to read his obit. One thing needs to be added to it: He won the ARRL 5000 mile-per-watt award for working Anzio, Italy from his home north of Chicago on 5W. I am very lucky to have had him as a teacher and mentor for those years. Thanks for sharing. Cheers, Jeff Mizener, DFW-TX

Monday, February 24, 2020

SolderSmoke Podcast #218: S-38E Woes; CW filter for uBITX; A Teensy Explosion; Mint, Cheese and Peaberries; Mailbag; A SPECIAL PLEA FOR FEEDBACK


SolderSmoke Podcast #218 is available 



SolderSmoke 218 is Sponsored by AF4K Crystals
 Bry Carling can get you the crystals you need. 



Flying drones with Billy.  Amazing tech out there.  In the 50 buck range with video cameras and facial recognition and tracking.  Check out Air Pix. 

Bill's Bench: 

Active CW filter in uBITX. 
Hi-Per-Mite from 4 State QRP.  Easy to do. Works well. 
uBITX to 5 W level. 

S-38E adventure.  
Replaced antenna input coil BUT -- it came from an earlier S-38 and doesn't resonate. 
So I bought a junker on e-bay and will take the E model coil out of that one. 
Had to re-string the dial!  And add rosin to it from Maria's old violin. 
BFO was not working.  Bad buzz sound. 
So:  Re-cap, Re-tube, Re-string, Re-align, Re-build power supply.  
Shortwave sounds good.  Nice to hear music coming from our machines.  
SHAMELESS COMMERCE DIVISION:   Please use the Amazon Search Box in the upper right hand portion of the blog.

Pete's Bench

A teensy-weensie explosion and fire
Mint!  Kl7FLR
60 Meters
Cheese    Microscopes
Peaberry
Radig
California hams using online SDR receivers for local nets.  

News You Can Use!
J-310s in LTSpice


MAILBAG

K5HCT August via Regen and YouTube

Doug WB5TKI and his wife read "Us and Them."

Rich K7SZ finally following SolderSmoke Podcast.  Welcome aboard Rich. 

Rick KD4KRA  His son was one of the kids in the MIR-Classroom contact that I monitored around 1993...

David AD8Y  Read SolderSmoke Book.  Similar Knack story.  Shared 1978 story:  Homework net on 75 meters.  

Paul KL7FLR Tapping and other tribal knowledge. 

Dave K8WPE   Says I'm fortunate to have a supportive wife.  So true. 

SPECIAL REQUEST:   IT IS VERY DIFFICULT FOR US TO KNOW HOW MANY PEOPLE ARE LISTENING TO THIS.  SO PLEASE, SEND AN E-MAIL TO SOLDERSMOKE@YAHOO.COM   JUST SAY THAT YOU LISTENED TO PODCAST #218 AND TELL US HOW YOU LISTENED TO IT (ITUNES, DOWNLAD FROM BLOG, STITCHER, PODBEAN, WHATEVER...  THANKS





Sunday, February 23, 2020

TRGHS: Hearing K5HCT Through a Single 12AU7 Tube with 12 Volts on the Plate (Video)



The lower portion of the column on the right-hand side of this blog is where I put links to interesting blogs, YouTube channels, and web sites.  Yesterday one of the links there led me to the above video. It presents a regen receiver using one 12AU7 tube and a 12 volt power supply.   Wow! I have many of those tubes.  And at 12 volts I am unlikely to electrocute myself.  Count me in.  

In the final minute or so of the video, the builder tunes around the 40 meter phone band.  Suddenly I heard a familiar voice.  It wasn't recorded long enough for the callsign to be heard, but I was pretty sure it was our old friend August, K5HCT (Here Comes Texas) from Odessa

Odessa, Texas is a good skip distance from both California and Virginia, so Pete and I have both talked to August many times. When I was testing out new homebrew contraptions, August was often there to help me out.  

I was pretty sure it was August in the video.  I checked with Pete -- he too recognized the voice.  Then I got an e-mail response from August -- yea, it was him.  

On the air, I often recognize a voice before I hear a callsign.  In this case it happened via a somewhat wobbly regen and the internet.  

THE RADIO GODS HAVE SPOKEN. 

Now where did I leave those 12AU7s? 


Saturday, February 22, 2020

VK3HN's AM Pulse Width Modulated Homebrew Transmitter



I'm still working on trying to match the excellent results Paul achieved with his AM receiver.  Then this morning I wake up to a Hack-A-Day article describing his even more impressive achievement with his AM transmitter.  

There was one line from the Hack-A-Day article that made me think of Pete Juliano: 

Younger hackers will note the Arduino Nano at the heart of the project, running the VFO and handling all the relevant transmit/receive switching. We can only imagine how welcome modern microcontrollers must have been to old hands at amateur radio, making synthesizing all manner of wild frequencies a cinch.

Indeed.  

And once again this story about Paul's AM operations has made me jealous of the obviously great AM homebrew culture that exists in Australia. 

FB Paul! 


Friday, February 21, 2020

PH2LB's Homebrew Hi-Per-Mite CW Filter in his uBITX



I really like the way Lex PH2LB measures and demonstrates the effectiveness of the Hi-Per-Mite CW filter designed by David Cripes NM0S.   Watch the short video above.  The blue trace is the audio input to the filter, the orange trace is the output.  Watch the output change as Lex sweeps the audio frequency range. 

He wrote: 

After studying the schematic I shifting through my spare parts stock to collected the components and build one according there design on a breadboard (I changed the center frequency from 700 to 600Hz).
I hooked up my signal generator with a amplitude of 2v max and sweeped it from 250Hz to 2KHz looking at the output on my rigol osciloscoop. On 2khz VMAX=0.04V, 885Hz=0.2V, 700Hz=1.5V, 662-585Hz=2V, 400Hz=0.2V, 500Hz=0.9V, 250Hz=0.04V. So a nice flat top between 585Hz to 662Hz.

A full description of Lex's project (with more videos) is here: 

https://www.ph2lb.nl/blog/index.php?page=ubitx-mods3#ubitx-mod14

Lex's Knack Story and the intro to his blog is here: https://www.ph2lb.nl/blog/index.php?page=history

Thursday, February 20, 2020

Tribal Knowledge: More on Tapping Metal


Back in 2014, when I was putting together my EB-63A solid state amplifier, I had to learn how to tap aluminum so that I could attach my transistors to the heat sink.  I did short YouTube video on how I did this (with tales of woe!).  This video turned out to be amazingly popular -- more than 27,000 views!  Apparently there is a great thirst for this kind of knowledge out there.  Recently someone in Alaska came across my video and shared with us some more useful information on how to tap metal.  Here is some tribal knowledge from Paul KL7FLR:  

Hi Bill and Pete,

Stumbled over Bill’s YouTube video about tapping in Aluminum and I would like to add my experience doing such. I have probably tapped over a 1000 holes in various metals, cast iron, steel, aluminum, bronze and brass from 0-80 to ¾-20. Each metal poses its own problems and solutions. There was nothing in error with your video or the method you presented.

My comments:

What causes broken taps is the tap is not being perpendicular to the work. A hole not perpendicular to the work, a worn/dull tap (this applies to the drill bit too) and lack of lube.
Every hole to be drilled and tapped must be perpendicular to the metal. A hand drill electric or battery will not be perpendicular unless two other people can spot the drill operator. Not possible when you are alone in the shop.

Any serious homebrewer should have a drill press. A small bench drill is very inexpensive. Even the $69 Harbor Freight model is adequate for the average ham’s workshop.  I see these items at flea markets and on Craigslist all the time cheap. Estate sales not so cheap but sometimes on last day you might get a bargain. Adjustable from 500 to 3600 rpm will cover all the normal sizes of drills. An x-y table could be added ($$) for added accuracy if desired. (search x-y table for examples and sources)

The size of hole you drill makes a difference too. Most drill charts assume you are tapping at 75% of thread contact. This is amount of the male thread of the bolt/machine screw threads contact the female thread in the piece. This is about the max you can expect without some precision tooling that won’t be in the average home shop.  75% provides maximum strength of the fasteners.  So unless you’re working on something that requires strength like a tower support bracket or the wings of an airplane you don’t need 75% as 50% thread contact is more than adequate. So when the drill chart shows that a #43 you can instead use a #42 or a 3/32 drill. A little bit larger hole will be a lot easier to tap threads.

The type of tap will also influence the difficulty of tapping threads. The typical hardware store tap is a straight 3 or 4 flute taper tap. The chamfer of a taper tap is 9 threads making tapping much easier. This is the tap for hand tapping.  The plug tap has a chamfer of 5 threads and is best used in a tapping head or fixture. The bottom tap is for tapping threads in a blind hole, usually after started with a taper tap. That increases the pucker factor x10. The normal taper tap cuts as it is rotated in a clockwise direction or counter-clockwise for left hand threads. The cuttings will clog the tap and you must back the tap out frequently to clean the cuttings from the flutes preventing the tap from seizing and possibly breaking the tap. Breakage is easily done with the smaller taps but also will happen to a larger tap too.  There is a style of tap called a spiral point tap. It will push the cuttings up to the top of the hole and not clog the flutes as easily as the straight flute taps. I still back it out and clean it out of habit. These don’t cost any more than the hardware taps. A 4-40 is about $2.90 the last time I bought one.

Avoid “carbon steel” taps. These will break easier than “high speed tool steel” taps and they are usually a few cents cheaper too.

Lubrication is necessary. Bill’s use of 3-in-1 oil is a good lube but “Tap Magic 20016A Aluminum” fluid is better for tapping aluminum and regular “Tap Magic” for everything else. https://www.amazon.com/Tap-Magic-20016A-Aluminum-Yellow/dp/B00065VEUO

The metal you are tapping can be an exercise in patience. “Hardware” store aluminum comes in various grades from crappy to real crappy. They are of an alloy best suited for the extrusion process and are not wonderful for the tapping process. Aircraft grade aluminum is nice stuff to work with but not cheap. Comes in many grades from 1000 series to 8000 to match the application. Grade 2024 is communally found and is easy to work with while 7075 works like steel.  Since most of us won’t be buying a 21 foot stick of aluminum or a 5x8 foot sheet we must take the hardware store grade into account when tapping holes and lean towards the 50% thread engagement, plenty of lubrication and lots of patience. I frequent several aluminum boat building firms and they let me pick through their scrap piles and I’ve made frequent donations of a case of soft drinks or a can of coffee to the break room fund and have also paid the going scrap price for the scrounging privilege.

Worn taps:  These get dull with use and will break at the worst possible time and in an expensive  workpiece. Broken taps  can be removed but are time consuming and require some expertise in doing so. Best to retire them when worn. I used to keep a chart of how many holes a particular tap had been used and at 35 holes for the small taps they got retired. 50 holes for taps larger than ¼”.  I once spent over a week of evenings extracting a worn tap from a locomotive cylinder casting. Never again! As my mentor said many times, “dull tools cause accidents and ruined work”.

Clamp the work to be tapped stationary if possible. You don’t want it moving around thus inviting a broken tap. Use some method of a tap guide (as Bill did with a block of wood, not great but better than nothing). I use what is called a “Piloted tap wrench”, https://www.amazon.com/Set-Wrench-Piloted-Spindle-Capacity/dp/B077SVQD4S .

Picture is of my setup.
Step 1: Work clamped securely to table at desired hole location.
Step 2: Drill hole.
Step 3: Use piloted tap wrench to tape hole.
Step 4: Done.

Wednesday, February 19, 2020

Hi-Per-Mite Active Audio CW Filter Installed in uBITX (video)



Coming home from the Dominican Republic, this was a major item on my list of desired mods for the uBITX: a narrower passband for CW.  Using the 2.3 kHz SSB passband, you could have many CW QSOs audible in your headphones.  Narrow that passband to 200-300 Hz and life gets a lot easier. 

Farhan had discussed adding a 12 Mhz IF filter of suitable CW bandwidth, but this seemed difficult to me. Besides, I have long wanted to use an active audio filter for this purpose. 

The Hi-Per-Mite filter from 4 State QRP Group is just what I needed. I built the kit without problems in about an hour, then I put it in the uBITX box, with  switch on the front panel that lets me put it in the circuit or take it out -- this is very satisfying and a lot of fun.  

The Hi-Per-Mite just goes between the uBITX audio out and the speaker/headphone connection. I built mine for "no gain" -- the uBITX provides plenty of audio. 

The selectivity with the Hi-Per-Mite compares favorably to that of my Drake 2-B with the 500 Hz LC filter.  You can get an idea of the performance in the video. 

Three cheers for the 4 State QRP Group and their Hi-Per-Mite!  Here is the page with all the info: 

http://www.4sqrp.com/hipermite.php


Monday, February 17, 2020

K6RRE's One Tube Rig Project


Mike will send us more info later... 

Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column