Other Kinds of Knack: Woodwork Wizard! (video)

This guy has some amazing tools, and even more amazing skills.  I find it inspirational to occasionally take a look at other kinds of workshops.   Check it out.  Video above. 

Along similar lines, the young Englishman Leo was in Washington state with his girlfriend when the lock-down and travel bans kicked in, so his work on Tally Ho (and his videos) continue.  See:
https://youtu.be/zXV0ywqj7zY

SITS! or Stay in the wood-shop! 

Brace Yourselves: DK7IH's New Transceiver -- The Gimme Five

Lock-down is bad enough, but now we will also have to cope with the feelings of homebrew inadequacy that Peter's rigs always cause.  But look on this as an opportunity for inspiration.  Peter once again raises the bar.   

https://radiotransmitter.wordpress.com/2020/04/11/gimme-five-reloaded-a-compact-5-band-qrp-ssb-transceiver-in-smd-technology/

This looks like it is the first in a series of blog posts. Just what we need in quarantine.   Thanks Peter.  

Videos on the Q-31 Quarantine AM SW Receiver Project (and some pictures)

I've been making some short, stage-by-stage videos of my Q-31 receiver project.  So far I have seven videos.  They are here: 

https://www.youtube.com/user/M0HBR/videos

Please subscribe to my YouTube Channel.  And give me some "thumbs up" if you like the videos. 

Thanks.  SITS!  FlattenTheCurve!  73 

Pads from Pete, toroids from Farhan

The diode ring

Altoids-sized tins will hold the circuit boards

Stay In The Shack -- Or in the front yard. 

Blog -- "Chinese Electronics Products Tested"

I was looking for information on my  FeelTech FY3200s Signal Generator.  I came across a very informative blog; it covers a variety of other Chinese gear and parts.  

Here is the Feeltech FY3200S article: 

https://chinese-electronics-products-tested.blogspot.com/p/fy3200s-function-generator-tested.html 

Here is the home page of the blog: 

https://chinese-electronics-products-tested.blogspot.com/

And here is backround information on the author: 

Thanks Jos! 

WB9IWT's Quarantine Mighty Mite and N3FJZ's "Hiram Percy Maxim Recognition Factor"

Leif WB9IWT has, during the emergency, been working on a Michigan Mighty Mite (See pictures above and below).  FB Leif.  

But also check out the very astute comment from Rick N3FJZ (below) .  I am, of course, all in favor of the HPMR Factor.  Almost all of my rigs would score quite high.    Others, I know, would seek a low score.  To each his own.  This is all for fun.  

Leif,

Great work.  If a ham from the 1920's were to see this rig, they
probably wouldn't recognize the actual components right away (but
knowing hams, they would no doubt figure it out), but the breadboard
layout circuit flow would be immediately recognizable; e.g. the plug-in
crystal, the coil, binding post.  The transistor and variable capacitor
may baffle them at first, but seeing there are three leads on the
transistor would start to give them clues.

That's the cool part about analog discrete component radio, no matter
how many years go by, and the appearance and size of the actual
components change, the physics of what's going on at the electron level
stays the same (SDR not withstanding).

I guess this could be a litmus test for us analog radio builders.  It
could be called the "Hiram Percy Maxim Recognition Factor" or "HPMR
Factor" with a range of 0 to 1.  After you  build your rig, take a look
at it and pretend that you could present it to Mr. Maxim and the more he
could understand the circuits, components and circuit flow on his own,
the closer to a factor of 1 your radio would achieve.  For example, an
SDR might only achieve a factor of .1 or even maybe 0, where as your rig
may achieve a factor of .8, and one of your crystal receivers would
definitely get a 1.

Someone could even workout a check list or formula where you would add
or subtract some fractional numeric values for each component you used;
e.g. you would subtract some value for every IC chip, microprocessor or
LCD display you use, and add some fractional value for each hand wound
coil, vacuum tube/valve or open air variable capacitor, et cetera.

Fun to think about.

Keep building.

Rick - N3FJZ

Quarantine Reading: Tribal Knowledge: Two Gems from Pete Juliano N6QW

WB9FLW recently reminded us of two very useful documents that have been kind of buried on one of Pete's web sites.   I think these documents are just the kind of thing we all need during these dark days of quarantine.  So just sit back, StayInTheShack,  and soak up tribal wisdom from the Wizard of Newbury Park.  

http://www.jessystems.com/Homebrewing%20for%20QRP%20SSB.pdf

http://www.jessystems.com/How%20To%20Stuff%20A%20Junk%20Box.pdf

Here is the message from WB9FLW that unearthed these gems:  

Morning Pete,

Three cheers for posting the Simple SSB Transceiver as a possible project during the pandemic lockdown.

Suggestion, folks that are new to your Website may not have seen some of your earlier posts especially on jesssystems.com. 

"Homebrewing For QRP SSB" is a gem and a great lead in to the simple SSB Transceiver project.

http://www.jessystems.com/Homebrewing%20for%20QRP%20SSB.pdf

There is a lot of wisdom in those pages, perhaps you can add a link for those interested in building the rig.

"How To Stuff A Junk Box" is good as well.

http://www.jessystems.com/How%20To%20Stuff%20A%20Junk%20Box.pdf

Hope you and the family are doing well.

Pete  WB9FLW

ZL2CTM Charlie Morris on "QSO Today" with Eric Guth 4Z1UG

Eric Guth 4Z1UG had a really nice interview with our friend Charlie Morris ZL2CTM.  Charlie shared with Eric a lot of wisdom about how to homebrew radio gear.  I especially liked Charlie's comments on keeping most of his rigs on the wooden prototype boards.  He said something important when he talked about the benefits of taking a break from a difficult problem, then coming back to it with a rested and refreshed mind. I noted, however,  that he said most of these frustrating problems have to do with software.  

I got got several chuckles out of Charlie's comments on the difficulty of building stable analog LC VFOs (here he seemed to be channeling our good friend Pete Juliano).  I chuckled because as I listened I was happily building the analog LC VFO for my Q-31 Quarantine receiver.  The centerpiece of this project is a variable capacitor that Pete gave me;   Pete took it out of an old  Galaxy V transceiver.   Believe me guys, no rotary encoder could possibly look as nice or have as much soul as that capacitor from Pete, with all its gears, reduction drives, and anti-backlash mechanisms.  It even smells of machine oil.  Call me a Luddite, but I will stick with the coils and capacitors.  

Listen to the interview here: 

https://www.qsotoday.com/podcasts/zl2ctm

Thanks to Charlie and Eric. 

The Low-Cost, Open Source COVID-19 Ventilator that Farhan is Helping to Build (Video)

While many of us are just trying to pass the time by building Quarantine ham radio rigs, our good friend Farhan VU2ESE has been hard at work on a really serious project:  He has been working out how to use an Arduino microcontroller as the electronic core of a simple ventilator that could save thousands of lives in the current crisis. See video above. 

Here is background info on the project (from ARRL): 

03/23/2020

Amateur radio volunteers from around the world have volunteered to assist University of Florida Professor Sam Lampotang and his engineering team in their quest to rapidly develop an open-source, low-cost patient ventilator that can be built anywhere from such commonly available components as PVC pipe and lawn-sprinkler valves. The amateur radio volunteers are developing Arduino-based control software that will set the respiratory rate and other key parameters in treating critically ill coronavirus victims.

Multiple volunteers responding to a call for help from Gordon Gibby, MD, KX4Z, included noted software developer Jack Purdum, W8TEE, and  uBITX transceiver maker Ashhar Farhan, VU2ESE. University of Florida physicians are working to address the critical legal aspects as the design moves closer to fruition.

The ventilator’s valves would precisely time compressed oxygen flow into patient breathing circuits under Arduino control, allowing exhausted patients with “stiff” lungs impacted by viral pneumonia to survive until their body can clear the infection. The software design team is also adding simple features such as an LCD display, encoders to choose parameters, and watchdog safety features. -- Thanks to Gordon Gibby, KX4Z

It is important realize that in countries around the world, many victims of COVID-19 will have no hope of getting anywhere near the kind of $50,000 ventilators found in U.S. or European hospitals.  That is one of the things that makes this low cost, open-source project so important. 

More details on the project here: 

https://github.com/afarhan/osventproto

Please pass the word on this project.  Please forward on Facebook, Re-tweet, etc. 

Quarantine Project: An AM Receiver for the 31 Meter Band. The Q-31.

During this StayInTheShack (SITS) emergency, it is good to have something to work on.  I decided it would be best to try to build something using only items currently in my parts collection.  I've been getting into shortwave listening again, and I've discovered that the 31 meter band (9.4 - 9.9 MHz) is my favorite. Thus the "Quarantine On-Hand 31 Meter AM Receiver."  A big part of the inspiration for this project comes from the AM receiver of Paul VK3HN. 

I propose that we all designate rigs built during quarantine as "Q" rigs.  This will be the Q-31. 

I had an old chassis on the shelf.  It held my WSPR DSB rig in Rome, and various other projects over the years.  It has so many holes in it that it looks like it has been used for target practice.  

A while back Pete N6QW sent me this really magnificent variable capacitor with at least two reduction dries and an anti-backlash gear.  I've been looking for a project that will allow me to use AND display this beautiful part.  It will be the main tuning cap for the Q-39. It will stay -- like the tubes in the rigs of days-gone-by --  above the chassis. 

While in London many years ago I picked up an old regen receiver at the Kempton Park rally.  The parts are still in my junk box.  A very nice 1.7 uH plug in coil (with socket) was there.  That will be the main coil in the Hartley Oscillator that will be the VFO.  I will add a few turns for the feedback coil (see circuit diagram below).  I wonder of that Eddystone coil was around for the Blitz? 

On the recommendation of our old friend Rogier (originally PA1ZZ), a few years ago Elisa got me a set of grey Altoids-sized metal boxes.  I will have three of these atop the target-practice chassis (they will provide shielding and will cover up the holes): 

-- One will hold the bandpass filter (designed with the Elsie program) and the mixer (probably diode ring, with transformers from Farhan). 

-- One will hold two IF amps with a 10 kHz 455 kHz IF filter between them (thanks to Bruce KK0S for the filters). 

-- One will hold the AM detector and the AF amplifiers. 

-- A fourth box will be under the chassis and will hold all the powered parts of the VFO circuitry.   I base my VFOs on this simple circuit from page 34 of Solid State Design for the Radio Amateur: 

This quarantine looks like it is going to last a long time, so it is best to take your time on projects like this.  I might work on the VFO today.  No need to rush... 

I am shooting videos as I go along and will at some point start putting them up on my YouTube channel.  

So, I suggest that any of you who are feeling bored and confined (that would be almost all of us) fight back by launching a Quarantine "Q-Rig"  project.   Send reports to me -- I will try to put them on the SolderSmoke blog. 

Remember:  StayInThe Shack!   #SITS!  #flattenthecurve. 

73  Bill 

SolderSmoke Podcast #220 -- S-38Es, AD9833s, Pete's Phasing Rig, FT-8

Java on the S-38E Tuning Dial

SolderSmoke Podcast #220 is available

http://soldersmoke.com/soldersmoke220.mp3

Hunkered Down.  StayInTheShack:  SITS!  Flatten the Curve!  It is working.

Teaching English again – via Zoom.  Kids completing the school year remotely.  

BILL'S BENCH

-- Finishing up on the S-38Es.

  

-- I wrote up my alignment, isolation and dial string experiences.

-- SWL  WRMI Radio Miami International on 39 meters 9.4-9.9 MHz.  Rock and Roll.

-- S-38E work is causing me some serious legal problems.  They are threatening to take down our sites and our podcast.   Google has put a CEASE AND DESIST ORDER on my blog:   Check it out http://soldersmoke.com/CEASEANDDESIST.JPG

--S-38E caused me to want to get my HRO dial receiver on the SW broadcast bands with a good AM detector.  

-- Next up: Hayseed Hamfest cap for my Drake 2-B.  And I have an idea on how to easily broaden it for AM:  Tap the 455 kc output on the Q multiplier jack.  455 AM detector to audio amp. 

SHAMELESS COMMERCE DIVISION

PETE’S BENCH

AD9833

Phasing Rig Project

.

DEAN’S PROJECT – Step by step.  Trouble shooting.  Understanding.  Receiver triumph.  FB.

MAILBAG

Jack 5B/AI4SV doing well in Cyprus

Daniel SA7DER listens during commute in Sweeden.

Peter VK2EMU building a 6 meter amp.  With Tubes

Jim WA8ZHN  says there are still 7751 Novices on the books.   FB.

Mike WB2BLJ modding his BITX – having a lot of fun.

Fred KC5RT – Great idea on isolation transformer in my S-38E.  

Jerry Palsson: S-38C's curves vs. S-38E's exotic places.  Java. 

Krakatoa East of Java

The Year of Living Dangerously

Anonymous mail:  FT-8 DX -- Are these contacts legitimate? See below. 

Dear Bill and Pete: 

I've been meaning to share with you something that has come to my attention by a rather circuitous route. 

As you guys know, I've been involved in the software/IT side of ham radio for many years. I've watched many digital modes come and go.  I've always enjoyed my work, but lately I've seen something that makes me uneasy. 

I'm sure you guys have heard of the fantastic DX that is being worked by many guys using FT-8.  It seems like all they need to work Jakarta is a couple of watts to a wet noodle. Shazam!  Contact! 

Well, I learned something that calls into some question the legitimacy of many of these contacts....  

As i understand it, certain manufacturers, in cahoots with a major American ham radio organization (that happens to be very dependent on ad revenue from that manufacturer), have secretly set up a system that combines the internet and ham radio. 

Here is how it works:  Suppose Joe Ham gets on FT-8 on 40 meters.  He puts out a call using his QRP transmitter and the aforementioned wet noodle.  No way that signal is going to Jakarta, right?  Well, it will with a bit of help.  

The system has SDR transceivers  and great antennas set up at strategic points around the world -- these are really great locations -- think mountain tops near the coastlines, always with high speed internet T5 connections. I think this is part of the whole “contest superstation for on-line lease” business model.  

One of these stations picks up Joe Ham's FT-8 call. Sometimes it will just re-transmit it, sometimes is will send it to a counterpart station on the other side of the globe.  Bingo, Joe Ham's signal is suddenly in Jakarta.  A station there enthusiastically responds, and that signal goes back with the same kind of repeater/ internet assist.  This is all done out of the reach of the FCC.  They are usig overseas locations,  some of them in Mexico.

Of course they have to be careful not to "facilitate" these kinds of contacts during times in which the bands are obviously dead,  That's why 40 is so useful for this system.  Obviously they can't keep this kind of thing secret forever -- they just want to get guys hooked on FT-8, then they can reveal the system, selling it as nothing unusual, you know, sort of akin to Echolink.  

Of course, this hasn't been made public (for obvious reasons!) but I can tell you the name of the system:   They tried to make it sound like something familiar (in this case like APRS): They call it  "Automatic Private Radio Internet Link 1."  My understanding is that when they do their “roll out” they will offer the new service to those willing to pay a subscription.

Obviously as an old-school, traditional ham, I'm troubled by all this.  What do you guys think?  I wonder what your listeners would think. 

Please don't mention my name..  But here is a site that describes the new system: 

http://www.automaticprivateradiointernetlink1.com/

Thanks and 73... 

Please let us know if you have any information on this, or have observed any unusual and suspicious success with FT-8.