Hurricane Sandy backup station at N2CQR
SolderSmoke Podcast 147 is available for downloading:
http://soldersmoke.com/soldersmoke147.mp3
October 29/30 2012
Hurricane Sandy on the way
Thanks for birthday wishes
Einstein -- a very nice fellow with a bit of the Knack
Rocket project update
808 key chain cameras (thanks for the Amazon support!)
Audio output transformer for Barbados Barebones RX
Mighty Midget RX -- breaking it, fixing it (with help from friends)
Freq counter connection to Tek scope
Halli S-38E -- How to avoid electrocution?
The HQ-100's anti-drift alarm clock
Book Review: "Instruments of Amplification" by H.P. Friedrichs (5 Soldering Irons!)
BANDSWEEP: 20 meter SSB via DC receiver on hurricane day
Report on outcome of the hurricane -- inverter saves the day (really the night)
MAILBAG (a big one).
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Here's your S-38x modification suggestion. First polarize the plug so that it has a HOT (short blade) and a Neutral (long blade). You can replace the plug with a modern one, but also splitting the 'designated neutral' with a wire cutter will make it wide enough to never go into the narrow slot.
ReplyDeleteThen, rewire the POT switch so that it goes directly to the HOT.
http://km5z.us/S-38B_refurb.php
It makes a swell receiver, though not quite as good as a ham rig of the era.
Mike Yancey, KM5Z
Dallas, Texas
Another hexbeam build;
ReplyDeletehttp://www.k7peh.com/HexBeamInstall.html
73 Kim VK5FJ