Sunday, October 6, 2013

BITX BUILD UPDATE #13 -- VIDEO TOUR



I hope to get the next podcast out within a week or so.  The BITX has been keeping me busy!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
at

3 comments:

  1. DavidOctober 11, 2013 at 9:49 AM

    Would it be feasible to complete this project without access to a Tektronix 465 or equivalent?

    ReplyDelete
  2. Bill MearaOctober 11, 2013 at 10:58 AM

    David was asking if it would be possible to build a rig like this without access to a Tek 465 'scope or equivalent. Yes (but of course life is better with a 'scope, especially a Tek!). But I don't think this is a project for a beginning builder. Better to start with simpler projects: A Direct Conversion receiver, then later a Double Sideband Transmitter. See Peter Parker's wonderful projects.

    ReplyDelete
  3. English UK NewsOctober 18, 2013 at 3:35 AM

    This comment has been removed by a blog administrator.

    ReplyDelete