Friday, April 1, 2022

SolderSmoke Podcast #236 -- Bill's 17-12 Rig, Pea Shooter, VFO Wisdom, Temp Compensation, Need Code for Max2870, Making Enclosures, MAILBAG

ARC-5 R-23 Nav Receiver Parts

SolderSmoke Podcast #236 is available!

http://soldersmoke.com/soldersmoke236.mp3

Winterfest!  Many Boatanchors.  Lots of old good analog test gear.  Talk with Dean KK4DAS.  Met up with Armand WA1UQO and Charles AI4OT. 

Pete's Bench: 

-- Looking for help in software development for MAX2870 board.  
-- Tapped Capacitance Impedance Matching
-- The Pea Shooter (See N2USD's version in videos
 below).
-- Tribal Knowledge on Making Enclosures

Bill's Bench: 

-- 17-12 Band Imaging SSB Transceiver.  It works on both bands. 
-- Plan for Glowing Numerals (N6QW has been there and done that!)
-- WU2D's videos on VFOs.  
-- Temperature Compensation:  HT-37 capacitor.  FT-101 VFO,  even in the ARC-5 receiver! 
-- Trying to get more rigorous about receiver design.  Gain distribution, IMD, Dynamic Range, etc. 
-- Do I need a true RMS audio voltmeter?  Or can I get the same info from freeware audio spectrum analyzer and soundcard?
-- 6EA8s replace 6U8s in MMRX 

SHAMELESS COMMERCE DIVISION:   We have a sponsor!  

PARTS CANDY out of Chicago produces quality test leads for your bench.  The guy who runs the company is Carlos, and he is one of us.  He is an electronic tinkerer. See the ad on the left hand column of the SolderSmoke blog.  Just click on the picture of the test leads and you will be taken to Carlos's ebay store.  Go for it. 

Mailbag

Walter KA4KXX in Orlando -- Diodes in BITX Bilats -- Why?  Farhan says To prevent reverse junction of off transistor from conducting and clipping waveform. 
Tony G4WIF -- Audio test gear and G3ROO paraset
Todd K7TFC Pine boards, TIAs and 12 meters
Dean KK4DAS  Ceramic Variable Oscillators on 40.   Juliano Criteria? 
Mike WU2D   VFOs and Temp compensation. ARC-5s
Chris KD4PBJ   A really nice parts care package -- Thanks Chris! 
Steve M0ECS.  Inspired by SS, moved something off the Shelf or Box of Shame. 
Jason KD2RKN Building a DC receiver.  It is all our fault. 
Chris Mannon in Indiana joining the CBLA
KC4GMH is listening! 
Ed N2XDD has been armed with a 3.579 MHz crystal.  
Harvey Wa3EIB working on his museum 
Tim AG4RZ is BACK IN THE SOLDERSMOKE! 
Fred KC5RT -- an old friend -- recommends Bangood RF sig gen for 88 bucks. 
Shlomo 4X4LF listening and homebrewing from a Kibbutz in Israel. 
Chuck KF8TI was a Peace Corps Volunteer in the Philippines. 



2 comments:

  1. Good idea Keith. But TechieTatts prefer schematic diagrams or formulae. Portraits cost extra. I don't think I would go with HPM. But maybe Frank Jones.
    73 Bill

    ReplyDelete