Good Vibrations!

Somehow this goofy circuit diagram (sent to me by Mike, KC7IT) seems appropriate this morning. That is because, gentlemen, this diagram represents the kind of homebrewer I've been this week. After far too much struggle, and with the kind assistance of wizards from around the globe, I succeeded this morning in making an astable multi-vibrator do its thing. Not exactly a momentous achievement, I know. What you may ask, was the problem? Simple: Hans Summer's diagram called for 680K resistors from the power supply to base. But I somehow managed to put in two 68K resistors. This apparently results in an entirely different RC time constant!

Anyway, it is now percolating along nicely. The 2N2222s work fine, as do the two 10 uF electrolytics in parallel. It seems to produce a frequency of around one cycle every 15 seconds. That should be just about right for the QRSS FSK.

Thanks to all for the help and assistance provided. And thanks to xkcd for the cartoon!

Astable Multi-NON-Vibrator (Help!)

Having made good progress on my Ugly, Discrete Component, DC recever for 30 meters, this week I turned my attention to the little QRSS transmitter that I mentioned last week. The idea is to run this thing out at the country house. The inspiration here comes from Hans Summer's ultra-simple QRSS transmitter:

I ran into trouble this morning. The oscillator is running fine. But the little two transistor astable multivibator that is there to put some FSK on the signal is not vibrating. What am I doing wrong here? Instead of the BC-107s or 108s used by Hans, I'm using 2N2222s. Hans used 22uF caps. I didn't have any, so I just put two 10uF electrolytic caps in parallel. But nothing happens. It just sits there. Any ideas? Hans was running his rig off bleach batteries and was struggling to keep current low -- I don't have this constraint, so maybe by using lower value resistors to the collectors and bases?

Help me! Help me!

(I apologize in advance if this posting results in ads for other kinds of vibrators!)

G0UPL's Ingenious QRSS Circuit

Just look at that circuit! That's a complete QRSS beacon transmitter, including a multivibrator (the two transistors on the left) to generate a recognizable pattern on the grabber screens. This diagram appears in SPRAT 134. Hans Summers ran this rig with just a couple of volts from his homebrew bleach-based battery system back in 2008. I plan on putting a version of this rig into the solar powered lawn lamp I showed you two posts ago (scroll down).

In other news, I finished building the Ugly Weekender AF amp this morning, and it passed the smoke test. My WSPR system went toes up this morning, so today I am QRSSing on 30 meters. I'm running my usual upside down FSK. Please let me know if you see me.