This post has a definite San Francisco vibe.
Hamilton KD0FNR appeared on the SolderSmoke blog way back in 2011. Perhaps he should join forces with N6ASD who lives quite close to him in SF, and seems to share radio interests. Also in their area is the esteemed Bay Areas blogger and homebrewer Dave AA7EE ; Dave recently sounded the CBLA alarm, alerting us to the presence of an intruder on 3579 kHz. In the process, Dave mentioned the Pt. Reyes Web SDR, the presence of which came as welcome news to Hamilton. Finally, Dave and Hamilton mention the KPH Web SDR, which brings to mind Dick Dillman W6AWO who has been on the SolderSmoke blog several times.
Hamilton and his kids have their rig (a Rockmite and a Tuna Topper in a Dole Pineapple can) mounted at the feedpoint of their dipole (in the red shopping bag above). They link to it via WiFi and Bluetooth. FB. Thomas Witherspoon has a nice presentation (by KD0FNR) of the TouCans project on his blog: https://qrper.com/2023/12/field-radio-kit-gallery-kd0fnrs-rockmite-20-and-tuna-topper/
Hamilton KD0FNR writes:
At the moment, the kids whose dad I am, better known as the gang—12, 10, and 8 year-old Diaze, Mota, and Tawnse.. all internet aliases—are big into 20 meters QRP CW with Project TouCans, a Rockmite coupled to a Tuna Topper. The radio and the amp that popped us out of QRPp to plain-old QRP are both housed in a Dole Pineapple can with a tuna can as a cover and antenna mount. The whole rig is still very much mounted in our half-wave dipole!
Project TouCans consists of a Rockmite feeding a 5 Watt Tuna Topper, all of which is housed in our dipole antenna. The Rockmite has a single crystal bandpass filter on it's rx input. That makes it a pretty wide reciever which is fine, but it's particularly sensitive to its tx frequencies, 14075.5 and 14058 kHz AND—for some reason I have yet to understand—10459 kHz. By watching the SDRs that now—thanks Dave—envelope us here at our home QTH in San Francisco, we can see the frequencies of incoming signals. That information keeps me from responding to 14059 kHz signals in vain.
And now, the headphone repeater: TouCans is completely wireless with respect to the ground. That means there's no power line, no feedline, no keyer lines and no headphone line. Keyer controls are handled via wifi to a Raspberry Pi Pico-W on the rig while audio is brought back to my headphones via Bluetooth. Power is provided by a USB-C battery pack that lives in the rig which is mounted above us in the antenna. (Yes, all of this is becuase I thought feedlines matches and baluns were too mystical and hard to understand years ago. Yes, this has probably all been more work than a balun. Yes, I am still totally enamored of my original design decision. :) ) Anyway, the bluetooth range is about 50 feet and the wifi range is shorter than that. The short of it is—pun not intended—that I can't quite use the rig while I'm in my office. But, I can send CQ to the rig every half minute or so via a memory keyer, then turn on the SDR in my office, and then sprint a bit closer to the rig when someone calls back. (It helps that houses in SF are a bit tiny.) So, SDRs are kinda an integral part of our QTH setup and it's awesome to learn about a new—to us—one! Thanks again!
Posts
