Excellent New Video from Grayson KJ7UM on his Thermatron version of the Michigan Mighty Mite

Here is a really wonderful video from Grayson Evans, KJ7UM, author of Hollow-State Design for the Radio Amateur.  

I really loved this video.  Throughout we see Grayson's sense of humor.  Early on he explains the differences between a tube (what remains from a roll of paper towell), a valve (like the plumbers use) and a THERMATRON (like a 6146).  Grayson is the inventor of the word Thermatron.  We should all pledge to use it whenever possible. 

Grayson's humor also shows up when describing the parts acquistion process for the Thermatron Michigan Mighty Mite.  He puls out a coil (a huge coil) and laments that it is not -- despite its large size -- sufficiently inductive. 

There are wonderful shout outs to SolderSmoke, to Electric Radio, to the Color Burst Liberation Army, to Pete Juliano,  and to Rex Harper.  

Grayson describes the utility of Rex Harper's Thermatron ME pads.  

During the video, Grayson actually builds the Thermatron MMM.  In under 2 minutes!  He then experiences the Joy Of Oscillation, or JOO as it has come to be known.  OM needs a contact -- listen for him on 3579.  He is calling CQ.  

Grayson talks about his book, Hollow-State Design.  I have a copy with me here at SolderSmoke Shack South in the Dominican Republic.  Great stuff.   The above link takes you to Lulu, where you can order the book.  You can also get it from Electric Radio Magazine here: https://www.ermag.com/product-category/books/

Thank you Grayson for bringing us this video, and so much more over the years.  And for giving us the very useful and fun word:  THERMATRON!  

Hammarlund and Homebrew Heroine: Janis AB2RA, HQ-100 Filter Cap Question

 

I was searching for Hammarlund HQ-100 wisdom when Google pointed me to the Electric Radio articles of Janis AB2RA.  They were in  ER #380 and #381 (February and March 2021).  Lots of good stuff  in there.  

This morning I happened upon a 2014 SolderSmoke blog post (as you do) about my Tuna Tin 2. Turns out that Janis was my first contact with this rig.  And she too was running a homebrew rig. TRGHS. 

https://soldersmoke.blogspot.com/2014/03/i-too-built-tuna-tin-2.html

I continue to work on my HQ-100.  The AC hum is getting worse so I have ordered a replacement capacitor can from Hayseed Hamfest.   But I was a bit confused about which cap to order.  Hayseed has two caps listed for the HQ-100 -- one (it seems) for the early model of this receiver and one for later models.  Is that right?  Did Hammarlund update the power supply to add filter capacitors?  Take a look: 

https://hayseedhamfest.com/collections/hammarlund

Dean KK4DAS is getting ready to work on his dad's HQ-170A.  He too will find lots of wisdom and tribal knowledge on Janis's wonderful web site.  

Her main page: http://www.wireless-girl.com/  (with a vast amount of technical info available through the links on the upper left side of this page) 

About Janis: http://www.wireless-girl.com/AboutMe.html

Thanks Janis!  

The Original Wireless Girl

http://www.wireless-girl.com/OrigWirelessGirl.html

Joe Galeski's 1960 "IMP" 3 -Tube Filter SSB Transmitter, and the Spirit of SSB Homebrew

Here is another important bit of SSB history.  In  May 1960, Joe Galeski W4IMP published an article in QST describing his super-simple SSB transmitter.  While Tony Vitale's "Cheap and Easy" rig was a phasing design, Joe came up with a filter rig.  He built USB filter at 5775 kc.  With it, he ran a VXO at around 8525 kc. This put him on 20 meter USB. 

Here is the QST article: http://marc.retronik.fr/AmateurRadio/SSB/A_3_tubes_filter_rig_%28SSB%29_%5BQST_1960_5p%5D.pdf 

In discussing how to put this rig on other bands, Joe got the sideband inversion question exactly right: 

Thank you Joe!  

Joe even provides an comment that seems to capture an important element of the homebrew SSB ethos.  Joe homebrewed his filter, but he mentioned the possibility of using a store-bought filter: 

That's the spirit Joe!  

Along the same lines, Jim Musgrove wrote in Electric Radio: 

Having built Lew McCoy's Mate for the Mighty Midget receiver (which also used just three tubes), I can't help thinking that an IMP-ish transmitter would be an excellent complement to the Mate for the Mighty Midget.  

Jim Musgrove K5BZH knew Joe Galeski and wrote about him in the January 1992 issue of Electric Radio.  Jim wrote that Joe was an optometrist by profession. When OE1FF wanted to know the cost of building an IMP, Joe Galeski boxed up the original and sent it to him.  FB Joe. 

In December 1961 Joe Galeski published a QST article describing a transistorized version of the IMP -- this rig ran on 15 meters.  K5BZH wrote that Joe later published an article about a small, solid-state transceiver,  appropriately called "The Shrimp." 

W2EWL's "Cheap and Easy SSB" Rig -- And The LSB/USB Convention Myth

In March 1956 Tony Vitale published in QST an article about a "Cheap and Easy" SSB transmitter that he had built around the VFO in an ARC-5 Command Set transmitter.  Vitale added a 9 MHz crystal-controlled oscillator,  and around this built a simple phasing generator that produced SSB at 9 MHz.  He then made excellent use of the ARC-5's stable 5 - 5.5 MHz VFO.  His rig covered both 75 meters and 20 meters.  Here is the article:

http://nebula.wsimg.com/2b13ac174f7f2710ca2460f8cf7d6b8b?AccessKeyId=D18ED10DA019A4588B7B&disposition=0&alloworigin=1

Because it used the 9 and 5 frequency scheme, over the years many, many hams have come to think that Vitale's rig is the source of the current "LSB below 10 MHz, USB above 10 MHz." This is  wrong.   An example of this error popped up on YouTube just this week (the video is otherwise excellent): 

First, Vitale's rig had a phasing SSB generator. All you would need to switch from USB to LSB was a simple switch.  And indeed Vitale's rig had such a switch. Pictures of other Cheap and Easy transmitters all show an SSB selection switch. So with a flip of the switch you could have been on either USB or LSB on both 75 and 20.  With this rig, you didn't even need sideband inversion to get you to 75 LSB and 20 USB. 

Second, even if hams somehow became so frugal that they wanted to save the expense of the switch, leaving the switch out (as suggested above) would NOT yield the desired "75 LSB 20 USB" that the urban legend claims that W2EWL.   As we have been pointing out, a 9 MHz SSB generator paired with a 5 MHz VFO (as in the Vitale rig) will NOT -- through sideband inversion -- yield LSB on one band but USB on the other.   

W2EWL's rig could not have been the source of the LSB/USB convention.  I still don't know where the convention came from. I am still looking for the source. 

But leaving the LSB/USB convention issue aside, Tony Vitale's rig is an excellent example of early SSB homebrewing, and of a very clever use of war surplus material.  In the January 1992 issue of Electric Radio magazine, Jim Musgrove K5BZH writes of his conversations with Vitale about the Cheap and Easy SSB.  Tony told Jim that this rig came about because the Central Electronics exciters required an external VFO -- they recommended a modified BC458.   B&W had recently come out with a phase shift network. Vitale went ahead and built the whole rig inside a BC458 box.  FB Tony! 

In the December 1991 Electric Radio, Jim K5BZH reports that Tony was recruited into the ranks of SSBers when he watched a demonstration of SSB by Bob Ehrlich W2NJR in November 1950. Tony very quickly started churning out SSB rigs.  His daughter Trish Taglairino recounted that when her father had "done something great again" there would be a parade of hams to the basement shack.  About 30 guys showed up when Tony put his first SSB rig on the air -- they sent out for beer.  

Thanks to Jim for preserving so much SSB history. 

Grayson Evans KJ7UM's New Blog -- Lots of Great Technical Info

 

Our friend Grayson Evans KJ7UM, author of "Hollow State Design" has launched a new blog.  It is filled with great technical info.  The blog has links to the articles Grayson wrote for Electric Radio magazine.  

Check it out:  https://kj7um.wordpress.com/ 

Amazing Homebrew/Boatanchors QSOs on 40 --Six solder melters in a row!

Al W8VR

After a day of happy tinkering with the Direct Conversion receiver I've been working on, I turned off the soldering iron and got on 40 meter SSB with my BITX Digi-Tia. 

First -- Steve W4IJ came back to my CQ.  Steve is a boatanchor enthusiast and has written for Electric Radio magazine.  FB. 

W4IJ Boatanchors

When Steve signed off, I got into a contact with Pete W8NBO.  We had spoken before and he had told me of a homebrew transmitter he'd built as a kid.  This time I asked for details: It was a 6AG7 oscillator to a 6L6 amplifier.  He ran it with an S38 (brave man!).  He described what must have been a very painful effort to hack (literally) the needed holes in the transmitter chassis using just a spike, a hammer and a file.  I told him this brought back my memories of similarly painful chassis work (mine was for a power supply for a Heath HW-32A).

At this point we were joined by Arnie, W2HDI.   Arnie's rig is in Stowe Vermont, but he was running it remote from the South of France where he and his wife were celebrating their 50th wedding anniversary.  Arnie shared with us memories of similar chassis pain -- his were related to an external modulator that he built for a DX-40. I think he said that all he had was a hole punch and a file.  Oh, the humanity! 

Then Al W8VR joined the conversation.  Al said that he's been in the game so long that his early rigs were built using cigar boxes as chassis.  I pointed to a connection:  I noted that my BITX rigs are enclosed in what could be considered cigar boxes.  Al's QRZ page picture has a magnificent AM rack rig that he said was actually built twice.  There is also an HRO-60 in the picture.  FB. Check it all out at Al's web site.  Click on the mic for the write ups, the key for the pictures.  http://www.w8vr.org/

Then Dennis K0EOO called in.  Holy Cow!   Dennis and I spoke not long ago.  You may recall my enthusiastic write up of his beautiful 1974 SSB rig: 

http://soldersmoke.blogspot.com/2017/08/k0eoo-homebrew-ssb-in-1974.html

and

http://soldersmoke.blogspot.com/2017/08/more-on-k0eoos-amazing-homebrew-ssb-rig.html

This was almost too much.  Rarely will you spontaneously come across so many hams who have melted so much solder.  FB. 

Icing on the cake:   When I returned to the bench, I fired up the DC receiver and heard Mike KN4EAR talking about his BITX40.  I switched to the Digi-Tia and gave Mike a call.  He reports making many contacts with his rig. FB. 

TRGHS. 

SolderSmoke Podcast 199 Eclipse, Regen, BITX, DC RX, 3D OLEDS, Iphone Boxes, Mailbag

SolderSmoke Podcast #199 is available. 

http://soldersmoke.com/soldersmoke199.mp3

2 September 2017

The Eclipse.  The Floods. 

Sawdust Regen gets John Henry off to a good start. 
Voltage regulators as audio amplifiers

The return of the Simple-ceiver (Direct Conversion)

Ceramic Resonators

3D OLEDS

iPhone Boxes as rig enclosures

Electric Radio on Frank Jones

17 Meter Contacts 

MAILBAG

SolderSmoke Podcast #198 - D-104, HW-8, Juliello, DIFX, Dishal, Baofeng, MAILBAG

Bill Breshears WC3K (SK)

SolderSmoke Podcast #198 is available. 

http://soldersmoke.com/soldersmoke198.mp3

29 July 2017

Sign on a beach store:  SHACK-TACULAR! 

Noticed that EB63 amp was getting hot. Why?  

TT2, Herring Aid5, Farhan's Key:  QRPp and CW!  See?

D-104 lore -- Reading from Bill Breshear's (WC3K) ER article

Astatic  crystal/ceramic element -- disappointingly flimsy

Electret-ing it.  The G-Spot (see picture above)

Walery KB2FIV sent crystal mic element and piezo buzzer (reverse for mic!) FB

HW-8 AF filter Center Frequency Problem.  IT'S TRUE!  Fixed!  Finally. 

Shack re-org at N2CQR

Got Steve Silverman's HP 8640B Sig gen on the bench.  Required reinforcement

Pete's new DIFX

LM373 rigs.  Perhaps with that CA3020 Pete sent me. Chips Ahoy! 

Juliano Yellow? Origins of Blue?  Juliello? Julionyx? 

HB Crystal Filter Capitulation? Don't give up Pete --  just dish the Dishal!

Ceramic VXOs?  K.P.S. Kang

Crystal testers by G7WKE and Dino KL0S.  Impressive. 

Antennas and BITX40 modules.  Antennas are important.

Bill's new Baofeng HT on 440.

Fixing my Sony SW7600GR

MAILBAG

Steve Silverman alerts us to NYC radio row now in the Bronx.

Tony G4WIF on the cover of SPRAT -- Getting the Don Cameron award. FB 

Armand WA1UQO points out that the Berryville hamfest is coming up... 

Thomas KK6AHT F4HDQ writes in. 

On the air with W8NSA

Juliello.  No. 

The Soul of the Old Machine

I continue to peruse the stack of Electric Radio magazines that Armand WA1UQO gave me last month.   Great stuff.  I'm really struck by how much of our ham radio history is captured in the pages of ER... and nowhere else.  This is a resource that should be protected.

In the last podcast I shared a few lines from the "Amateur Radio SSB -- The First Fifty Years" series or articles.  Today at lunch time I was reading the March 1994 issue, there was an article by Don Meadows N6DM entitled "A Homebrew CW Receiver."  From the last paragraph:

"This homebrew receiver as the main station receiver until 1975... In 1989 the homebrew receiver was finally mothballed... In its place I acquired an imported box that does everything.  This box is friendly and cooperative, but I have no rapport with its soul. When it ultimately falters, it will need to be cured in the manufacturers sanitarium for sick gear instead of on my own workbench.

I've always been proud of this homebrew receiver. It did its job exceedingly well. Retrieving recently this old friend from storage for photographs, cleaning out the dust and dead insects, inspecting its wiring up close --  all this evoked fond memories."