Grayson Evans KJ7UM Interview at Four Days in May at the Dayton Hamvention 2025

 

LISTEN TO THE INTERVIEW HERE: 

http://soldersmoke.com/KJ7UM at Dayton 2025.mp3

Grayson said quite a lot in this short 4 minute interview: 

-- At FDIM he was selling his wonderful book "Hollow State Design for the Radio Amateur."  Buy one here: https://www.ermag.com/product-category/books/ 

-- Grayson was also selling a Thermatron version of our beloved Michigan Mighty Mite transmitter.  It is crystal controlled for the 40 meter band, but the Color Burst Liberation Army approves! Here is a wonderful video on this rig:

https://soldersmoke.blogspot.com/2024/09/excellent-new-video-from-grayson-kj7um.html

And be sure to watch Grayson's excellent course on Thermatron Homebrewing: 

https://soldersmoke.blogspot.com/2024/02/grayson-evans-kj7um-video-on.html

-- Asked why someone should build with tubes when so much good solid state stuff is available, Grayson makes some especially excellent points:  The solid state gear is often filled with mysterious little black boxes -- we often don't really know what goes on in there.  Thermatron construction provides a break from complicated SDR nonsense "that is not really radio."  That last comment will generate some criticism, but not from here.  I think Grayson is right,  He earlier expressed admiration for complex circuitry, but he also rightly defends simple, understandable rigs.  

Here are Grayson's Technical Documents (a real treasure trove):  https://kj7um.wordpress.com/

Three cheers for Grayson.  And thanks to Bob Crane W8SX for doing this interview.  

FDIM 2024 Interview with Farhan VU2ESE

Thanks to Bob Crane W8SX we have some great interviews with those who made presentations at the Four Days in May event (FDIM 2024).  Sorry for the long delay -- it is all my fault, but I have excuses.  Our thanks to Bob W8SX, our correspondent at the FDIM event.  

Here is the interview with our friend Farhan, VU2ESE, the ham who has brought so much homebrew goodness to the hobby, starting years ago with the BITX 20 schematic. 

http://soldersmoke.com/FarhanVU2ESE.mp3

Thanks Bob!  Thanks Farhan! 

George Heron N2APB talks about Coherent CW at FDIM: Interview #7 by Bob Crane W8SX

It was great to hear George's voice again.  I was a big fan of his "Chat with the Designers" podcast. And it was great to see that Pete Eaton WB9FLW (an old friend of SolderSmoke) was also involved in this presentation.  

At FDIM George was talking about Coherent CW.  Now, my views on CW have been made quite clear, but I am going to deliberately avoid snide comments about how Coherent CW might be a contradiction in terms.  Thank you.   I think this is something that Pete N6QW and I can agree on. 

Nevertheless, this is all technically interesting.  This reminds me of what happens with WSPR.  But I wasn't quite sure what George was getting at with his discussion of the phase of the incoming signal -- I can see the need to get the receivers' narrow filter exactly on the transmitting station's frequency, but why the phase?  

Here is Bob Crane's interview with George: 

http://soldersmoke.com/N2APB23.mp3

And here are a couple of things with background info on CCW. 

https://www.sigidwiki.com/wiki/Coherent_CW

http://www.arrl.org/files/file/Technology/tis/info/pdf/7509026.pdf

Thanks George, thanks Pete, and thanks Bob. 

Farhan VU2ESE FDIM Interview (#6) by Bob Crane W8SX: VHF Rig, sBITX, and Good News on Raspberry Pi 4

It was great that Bob was able to catch up with Farhan and talk to him about his VHF rig and about the sBITX. 

    

Farhan said that the VHF rig (the BITX23) was presented at the homebrew show-and-tell as a project.  The idea was to encourage others to get into VHF homebrewing.  Farhan points out that many of us are reluctant to go into VHF building, thinking that we need special or exotic test gear. No true says Farhan.   He is trying, with this rig, to bust this myth.  FB.

    

On the sBITX, Farhan points out that he too -- coming as he does from the homebrew tradition -- finds some of the modern rigs quite intimidating.  So he designed the sBITX to be less intimidating.  It is, he says, a tinkerable rig that could be homebrewed. It is all open source.  

    

Farhan points out that the rig is built around the Raspberry Pi 4, a device that has recently been hard to obtain.  This has driven up the price of the sBITX a bit.   But good news:  Farhan says that the word on the street is that the Raspberry Pi 4 will be available in quantity starting at the end of June.  

Here us Bob's interview with Farhan: 

http://soldersmoke.com/VU2ESE23.mp3

BITX23 VHF Rig

And here is a video of Farhan describing the BITX23: 

https://soldersmoke.blogspot.com/2023/05/farhan-describes-his-new-2-meter

Thanks Fathan!  Thanks Bob! 

Greg Latta AA8V on Making Aluminum Chassis -- FDIM Interview by Bob Crane W8SX #2 (audio)

Our correspondent Bob Crane W8SX caught up with prolific builder Greg Latta AA8V.  Greg gave an FDIM talk on how to make aluminum chassis without having a machine shop.  I guess I am now going to have to buy a belt sander from Amazon.   

I was really glad that Greg mentioned his real passion: retro building.  FB Greg.  I have talked to Greg several times on the ham bands -- it is always an inspirational experience.  

Here is Bob's interview with Greg: 

http://soldersmoke.com/AA8V23.mp3 

Here is Greg's pdf file on his aluminum chassis construction technique.

https://www.frostburg.edu/personal/latta/ee/chassis/aluminumchassisconstructionnomovies.pdf 

And here is Greg's amazing web site: 

https://www.frostburg.edu/personal/latta/index.html

Thanks Greg!  Thanks Bob! 

Hans Summers G0UPL and his new QMX: The Bob Crane W8SX FDIM Interviews Part 1 (audio)

http://qrp-labs.com/qmx.html

We are very pleased and grateful to present this year's series of Four Days in May interviews by our FDIM correspondent Bob Crane W8SX.   Once again Bob did an outstanding job interviewing the FDIM participants. 

In this interview, the amazing Hans Summers talks about his latest QRP Labs kit, the QMX.  It is a combination of the QCX Mini and the QDX.  

Hans explains the M:  QMX. The M is for Marriage. Magnificent. Merger. Marvelous, many things like that. It’s what you get when you marry the mechanical and conceptual design of QCX-mini, with the SDR, multi-band digital implementation of QDX. Simply: QDX + QCX-mini = QMX. 

It has a very clever switching power supply that automatically adjust to prevent spurs and harmonics from the power supply from appearing in the band of interest. 

I was especially interested in his plans to implement an SSB option in future software updates.  Hans will use the same very complicated SSB generation scheme used in the trueSDX rig, but hopes to achieve higher performance and  improved signal quality due to the much more robust hardware of the QMX. 

Here is the interview: 

http://soldersmoke.com/G0UPL23.mp3

Here is the QRP Labs site about the QMX:  http://qrp-labs.com/qmx.html

Here is the QRP Labs web site: http://qrp-labs.com/

And here is a really wonderful and very current article by Hans on the evolution of QRP Labs and its rigs from 2010 right on up through 2023 and the QMX.  It is really interesting: 

http://qrp-labs.com/images/qmx/docs/fdim2023.pdf

Thanks to Bob Crane W8SX, Hans Summers G0UPL, and all of the FDIM organizers. 

Hans G0UPL-- Homebrew Hero

SolderSmoke FDIM Interview with Keith W. Whites -- Teaching Electronic Design to EE students using a QRP Transceiver designed by Wayne Burdick

When I first listened to Bob Crane's interview at FDIM with Keith Whites, I thought of the book "The Electronics of Radio" out of CalTech by David Rutledge.  Keith Whites told me that the difference between his effort at University of Kentucky was that Rutledge's course was designed for freshmen at Cal Tech, while White's course was aimed at Juniors and Seniors.  

I told Keith Whites that I had struggled to understand the Gilbert Cell and the NE602, the device that lies at the heart of the rig used in both courses:  The NE-602 Gilbert Cell Mixer used in Wayne Burdick's NORCAL 40A. Here is how I came to understand the device:  https://soldersmoke.blogspot.com/2021/11/how-to-understand-ne-602-and-gilbert.html

Here is Bob Crane's interview:  http://soldersmoke.com/2022 Whites.mp3

Here the slides that Keith used at FDIM: http://soldersmoke.com/2022 Teaching NorCal40A.pdf

Keith's students obviously got a lot out of this course.   Keith has kindly offered to make his course notes available to those who need them. 

Thanks to Bob Crane, Keith Whites, David Rutledge and Wayne Burdick. 

SolderSmoke FDIM Interview: Adam K6ARK and his 2.6 gram Mini-Pixie SMD Transceiver

I've not bee a big fan of the super-simple Pixie transceiver, but Adam K6ARK could make me a believer. 

Our correspondent Bob Crane W8SX interviewed Adam at FDIM.  You can listen to the interview here: http://soldersmoke.com/2022 K6ARK.mp3

The video above shows Adam's tiny Pixie in action in the California desert.  His rig is about the size of a postage stamp and weighs about 2.6 grams. FB Adam. 

Adam did a lot better with his Pixie than I did with my far larger and more complicated SST transceiver. He also did better than I did on 40 when I was using my ET-2 (two FET) transceiver. 

I liked how Adam recorded in the field the CW from his rig, I also liked his key (!) and his EFHW antenna and "tuner."  Adam's ability to cope with no CW sidetone was also admirable.  

Adam's YouTube channel is here: https://www.youtube.com/c/K6ARKPortableRadio

Thanks to Adam and to Bob Crane.  

FDIM Interview with Farhan VU2ESE

I didn't realize that our correspondent in Dayton/Xenia had interviewed Farhan.  There was a typo in the audio file name and I was wondering who this UV2ESE guy was.  A Ukrainian QRPer?   I was really pleased to find out that it was Farhan.  

In Bob's interview you will hear Farhan discuss the capabilities of his new Antuino (pictured above).  Pete's Antuino is in the mail, going transcontinental.  It should arrive in the Newbury Park Laboratory later this week.  

As for the spectrum analyzer that Farhan got me last year, I am waiting for retirement (soon!) to get that one going.  But there is a danger that the Antuino will leave little room for the older tech... 

In the interview you will hear Farhan talk about the Antuino circuitry, and about the roots of the three main devices in the Antuino box.  Very cool.  

Thanks again Farhan. And thanks Bob. 

Here is the interview:

http://soldersmoke.com/VU2ESE FDIM 2019.m4a

Farhan's Antuino page: 

http://www.hfsignals.com/index.php/antuino/

FDIM Interview with KI4IO -- Homebrew Direct Conversion Transceiver

I've been a big fan of Jerry's for several years.  He is the homebrew wizard of Warrenton, Va.  Warrention is just about 25 miles west of us.  Cappuccio the wonder-dog was born on a farm in Warrenton.  

I'm really glad that our ace correspondent Bob Crane W8SX caught up with Jerry at FDIM.  I liked his description of the joy of using a homebrew rig, and of the advantages of direct conversion.   Inspiring stuff!   Listen to the interview here:  

http://soldersmoke.com/KI4IO FDIM 2019.m4a

Be sure to check out the KI4IO page on QRZ.com

FDIM Interview with Hans Summers G0UPL on QSX SDR Rig, Probable Price, Features

Wow, our ace correspondent in Dayton/Xenia Ohio, Bob Crane W8SX, did a great interview with homebrew hero Hans Summers G0UPL.  

Hans discusses the success of the QCX CW phasing rig -- more than 7,300 sold.  That's amazing.  I didn't think there were that many solder melters in the world.  

Even more amazing is his description of his QSX SSB SDR rig, which is currently in development.  Click on the link below to listen to Bob's 6 minute interview.  You will be blown away by the features and the price of the QSX.  Go Hans!  

http://soldersmoke.com/G0UPL FDIM 2019.m4a

Thanks Bob! 

INTERVIEW: Bob Crane Talks to Jack Purdum W8TEE at FDIM. Definition of "Homebrew."

Jack Purdum has been making enormous contributions to the radio art.  His background with digital technology has opened many doors for homebrewers, especially through his books on the use of the Arduino microcontroller.   I think his new "JackAl board" is really going to shake things up.  I was glad that our correspondent in Ohio, Bob Crane W8SX, caught up with Jack and interviewed him for soldersmoke: 

http://soldersmoke.com/W8TEE.mp3

But I have one small disagreement with Jack.   It has to do with the definition of "homebrew."   Jack seems to define true homebrew as "designing and building your own rig from scratch."  My problem is with the "designing" part.  By this definition, those intrepid heroes of days-gone- by who saw a schematic in QST, ripped apart some old broadcast radios, and used the parts to build a 50 watt CW transmitter with a regen receiver were not true homebrewers.   I would maintain that they were.  I agree with Jack that kit building is a bit different, and of course designing the rig yourself earns you the coveted "designer" designation.  But for me, if you start with a schematic and an article, gather the parts and build the thing yourself, that is a homebrew project and you are a homebrewer.  After all, even the designers are very often making use of standard blocks of circuitry (Colpitts oscillators,  common emitter amplifiers, power supply circuits, etc.)

I think we will have to turn to our lexicon expert Steve Silverman for a ruling.  

In any case, thanks to Bob Crane and to Jack Purdum.