Not a Toy! K1OA Making Contacts with the SolderSmoke Direct Conversion Receiver and a KA4KXX Transmitter

This goes to prove what we have been saying all along:  this receiver is not a toy!  It is capable of operating as part of a real 2-way ham radio station. Hall of Fame member Scott K1OA has paired his receiver up with a Merry Christmas transmitter designed by Walter KA4KXX and has been making CW contacts with it (see above).  Walter supplied the crystal and many of the needed parts.  Scott has already worked WA9RNE, N4HAY and W3RJ, and has tried making contact with Walter but no luck yet. He has gotten RBN reports from Germany and New Zealand. All that with just 3 watts.

This is not the first time this receiver has been out to use.   I made one contact with it using a "Ten Minute" QRPp transmitter that I had intended only to use for test purposes: 

https://soldersmoke.blogspot.com/2023/02/first-qso-with-high-school-receiver-100.html 

HoF member Aaron ZL1AUN used his receiver with an SSB transmitter to make contact using his receiver:

https://soldersmoke.blogspot.com/2025/02/soldersmoke-direct-conversion-receiver_23.html  We understand Aaron's article about the receiver has been published in "Break-In" magazine -- we hope to get a copy (electronic would be fine!) 

And who can forget HoF member Nate KA1MUQ who turned his "frying pan"  direct conversion receiver into a double sideband transceiver and used it to make phone contact with Idaho from California: 

https://soldersmoke.blogspot.com/2025/03/nate-ka1muq-turns-his-frying-pan-dc.html 

If anyone is aware of other contacts made using this receiver, please let me know.  

M0NTV's "Crystal Filters for the Fearful" (video)

I really liked Nick M0NTV's approach to making a crystal filter (see video above).  He really simplifies a process that desperately needs simplification. I remember when I was building my first superhet receiver,  I came across Doug DeMaw's schematic for a crystal tester that would allow me to properly build the filter.  But the piece of test gear was far more complicated than the receiver I was building.  I never built Doug's device. 

Nick's technique is simpler even than the G3UUR method that many of us have been using for years.  Nick dispenses -- wisely I think -- with the need to calculate motional parameters, Q,  and equivalent series resistance.  This also eliminates the need to fidget around with the design software such as Dishal or AADE.  

Nick uses the Cohn topology (good choice) and uses kind of an "informed cut-and-try" technique to come up with the capacitor values.  

Filter impedance is determined with series trimmer resistors and the NanoVNA to watch the resulting passband.  Nick says this is a Charlie Morris ZL2CTM suggestion.  It obviously works very well -- the ripple that would result from impedance mismatch is eliminated.  

Nick's determination of the best turns ratio for the impedance matching transformers is brilliant.

Nick apologizes for what he says is a long video.  But it is only 30 minutes or so long, and if you are going to build your own superhet or SSB filter rig, it is well worth watching.   

Three cheers for Nick and for Charlie!  Thanks guys!