Podcasting since August 2005! Listen to our latest podcast here:

Podcasting since August 2005! Listen to Latest SolderSmoke

Saturday, November 14, 2026

SolderSmoke Direct Conversion Receiver Challenge: 140 Receivers Built (132 + 8 honorable mentions). Total Count: 140. Receivers Built in 19 Countries.

This morning we were very pleased to welcome Joe KZ4WC into the Hall of Fame (see above).  Welcome Joe! His is a richly deserved entry.  As with many of our builds, Joe faced some real challenges, but he hung in there and built the receiver.  As Pete said, "these radios don't build themselves." Joe's is receiver # 140.  FB. 

SolderSmoke Direct Conversion Receiver Challenge:  140 Receivers Built (132 + 8 honorable mentions) Total Count: 140.  Receivers Built in 19 Countries.

 -----------------------

NE3U (KY4EOD)  Matt 

KQ4AOP       First ham signals ever heard! 
N9TD             Derek
AC3NG          Ryan
VK3TPM       Peter Marks  
W4KAC         Ken 
W4KAC         Ken built a second one! 
N2EPE           Erik
VA3NCA        Wayde  (Canada)  
KI5SRY         Mark -- Gears on PTO screw
 
KA1MUQ       Frying pan receiver
AA1N              Adam
ZL1AUN         Aaron -- Using SSB transmitter -- (New Zealand)
W8UC             Never before homebrewed. 
VK4PG           Phil -- Nice case, "really pleased"
G7LQX           Working well, video of CW and SSB.  -- (England)
KE2AMP        John     Spring on PTO screw -- great
N9SZ              Steve  nice receiver
KD9NHZ        Piotr  Nice one
KE8ICE          Calvin, Very cool receiver. 
 
WV3V              Jayson!  Got it done!
GM5JDG         Martin.   -- (Scotland) 
KF8BOG          Jim:  A long struggle, but success.  
Chris Wales    Fantastic video.  -- (Wales)
YD9BAX         Wayan! Homebrew transformer!  (Indonesia)
N0NQD         Jeff 
WN3F              Roy -- Made new stickers! 
AB5XQ            Bill  
KB7ZUT          Andy  
AA1OF            Jer

VictorKees        Holland (Netherlands) 
KC9OJV           John -- Manhattan-style convert
WZ5M              1, 2 or maybe even 3 receivers!
K1KJW             Jim in Vermont
KC5DI              Dallas -- friend of WZ5M
Gary                 Australian -- Wooden PTO form (Australia) 
LU2VJM          Juan in Argentina  -- (Argentina)
K1OA               Scott "Most fun in 50 years"
KC9DLM         Ben -- Had EFHW problems
PH2LB             Lex  Yellow, Glue Stick -- (Netherlands)

AI6WR             David
G6GEV            Dave (It was a blast!)  (England)  
KC1ONM        Wayne  MakerLabs NH
KB1OIQ          Andy    MakerLabs NH
KA1PQK         Jay       MakerLabs NH
W1TKO           Mike    MakerLabs NH
K5KHK            Karl
SM0TPW         Mikael  -- (Sweden)
KI7LKB           Brian (coat hanger tube)
M6CRD            Chris  (England) 

W2DAB           Dave in NYC
W4JYK            Wes of VWS
KA4CDN          Mike of VWS
M7EFO             Adrian 
VK5RC             Rob  (Australia) 
KD8KHP          Dave
VK1CHW         Chris (Australia) 
KA0PHJ           Brian
W0IT                Louis
W1PJE             Phil

W2AEW           Alan
KN6FVK          John (Barkhausen-Be-Gone Spray) 
VU2JXN           Ramakrishnan -- (India)
AA0MS            Doug 
9V1/KM7ABZ   Paul  --  (Singapore)
VK2BLQ          Stephen -- (Australia)
N3FJZ              Rick
Daniel               VE5DLD  -- (Canada)
Student 1          Student of VE5DLD
Student 2          Student of VE5DLD

Student 3         Student of VE5DLD
K7WXW          Bill 
NK3H               Mitch
KN4ZXG         Ted
WA1MAC        Paul
N4AVC             Chuck 
K3IY                 Kevin
N6ASD             Ashish in Bangalore (India)
W1DSP             Rick
WD4CFN         Steve

KM5Z             Mike
KF5DAN         Dan
Fritz                 Fritz
N9OK              Joe
WA5DSS         Bill 
K0GDB           Grant
G0JNR            Shane Glow-in-Dark Coil Form
KK7BCO        Tobias
K2BVR            Bob
Robert              Sutton

K5YFO           Dave (Texas) 
KD4PBJ          Chris
KN4GAH        Chris -- EE perspective
F1GMA           Philippe  -- (France)
W2TEF            Todd
EI9ITB            Karl  -- (Ireland)
VU2TUM         Puneit Singh (India) 
AA7EE             Dave Richards
KI5VIR            Jay
CT7AXD       Graham -- Promoted from Honorable Mention! (Portugal)

G3MOT           Josh (England)
KW4H             Steve
NJ7V                Charlie (RedSummit)
N2ETZ            Denny
AB9LM           James
W9XT              Gary
G0PJT             Alex
KF8FZZ         Tyler
N7HPR           Steve (Instructor) (N7HPR Group)
Clark               (N7HPR Group)

KQ4ZHO        Kurt (N7HPR Group)
KQ4OBR        Brian (N7HPR Group)
KR4CUF         Justin (N7HPR Group)
Amanda          (N7HPR Group)
David               (N7HPR Group)
KM4AED       Jamey (N7HPR Group)
KN4MVH      Larry (N7HPR Group)
N5GVW          Dick (N7HPR Group)
W7KAL          Kal
KC9LFP         Joe

SP9DEL         Marian (Poland) 
LB8VA           Ivar (Norway)  
AA7FO          Chuck Adams! 
WE6Z            Doug
N7MN            Jason
VA2GJ           Gerald in Quebec
N6HA             Bill 
Andri             Bandung, West Java, (Indonesia)
K6AUS          Scott
Brett K          Tasmania (Australia) 

Dave             M6XTY
Joe               KZ4WC 
 
-------------------------
Honorable Mentions: 

*AA7U            Steve No PTO
*VK7IAN        Ian -- No Manhattan boards -- (Tasmania)
*KC1FSZ        Bruce's build on a PC board
* DL1AJG      Andreas -- (Germany)
* Matthew      Student of DL1AJG
* Arash           Student of DL1AJG 
*KA4KXX     Walter -- FB 20 Meter version
*M9KCA-ST2NH  Nader - LM386 in place of AF amp

Monday, November 9, 2026

October 21, 1934 at the Tillamook Light Station, Oregon -- W7DIZ Saves the Day by Building a Transmitter (and Receiver!) from Scratch

 
W7DIZ is seated on the right.  Note headphones.

From the January 1935 issue of QST: 


Shown here is the Tillamook Rock Lighthouse as viewed from the south, with Tillamook Head overlooking in the background, in about 1930.


For a truly harrowing acccount of the storm see:  https://www.ohs.org/blog/saga-of-the-tillamook-rock-lighthouse.cfm

Here is what they wrote about W7DIZ's heroic improvisation: 

Without a way to communicate with the mainland, assistant keeper and radio enthusiast Jenkins (radio callsign W7DIZ) showed “perseverance in contriving a shortwave radio sending and receiving apparatus from miscellaneous materials available at the station which resulted in reestablishing communication,” first with Seaside gardener and amateur radio operator Henry Goetze (W7CXK). One telegram, received at 7:10pm on October 23, read:

Derrick gone, water tanks moved, west end rock gone, sixteen plate glass broken stop Telephone cable broken at rock…light will be in operation Thursday stop Assistant Hanson right hand deeply cut stop Recommend sending inspector check station stop Assistant Jenkins Amateur radio in operation reply via Western union care of Henry Goetze Seaside Oregon.

Thanks to Bob KD4EBM for alerting me to this.  It would be great to have more details on the rig that W7DIZ built in the wake of the storm.  Unfortunately, this seems to be one of those cases where AI just seems to muddy the waters.  When asked for details of Jenkin's build, AI came back with some suspiciously detailed answers.  Sure enough, these answers were just guesses that AI made, based on nothing more than the contents of 1930s era ham log books.  

Can anyone tell us more about what W7DIZ actually built? 

Friday, November 6, 2026

OBIT: Cyril Hilsum -- The Many Who Made Big HDTVs possible

For obvious reasons, we don't have a lot of obituaries on the SolderSmoke Daily News. (We are aware of our demographics, and even a moderate inclusion of obituaries might quickly overwhelm the blog.)  But we will make an exception for this one, partly because of the great technical achievments of Dr. Hilsum, but mostly because his New York Times obit had a lot of the humor that I used to find in the British newspapers. 

https://www.nytimes.com/2026/11/01/technology/cyril-hilsum-dead.html?unlocked_article_code=1.OFE.uorU.Gd0R2Ef9O3Dh&smid=url-share

Hilsum is described early on as, "an exuberant British physicist with voluminous, untamed white hair..." Later in the obit, the writer notes that. "Dr. Hilsum... was 101, having suurvived to his 11th decade by avoiding fresh vegetables, and subsisting largely on TV dinners, chocolate and red wine."  

His technical contributions were really substantial: https://www.ieee-ukandireland.org/in-memoriam-professor-cyril-hilsum-cbe-frs-freng-1925-2026/     Thank you Dr. Hilsum! 

Wednesday, November 4, 2026

Stellafane: Homebrew Telescopes -- The Telescope Makers of Springfield, Vermont -- PLEASE COMMENT

https://www.nytimes.com/2026/10/24/science/space/stellafane-telescopes-makers.html?unlocked_article_code=1.N1E.ZDIZ.cdzUED-FHW76&smid=url-share

The above New York Times article reminded me of Sellafane.   You know, I think I would rather go to Stellafane than to Dayton/Xenia.  And I might prefer to go to Oshkosh and the EAA than to Dayton/Xenia.  And I think that says something about homebrewing:  It may be that the true homebrewers are to be found in these other locations.  

Anyway, this is a part of our series on "other homebrews" and other workshops.   Stellafane has an amazing tradition.  

PlEASE COMMENT:  What do you think?  Am I wrong about Stellafane over Dayton?  

Monday, November 2, 2026

Grayson Evans KJ7UM Talks Thermatrons with Charlie NJ7V on Red Summit

 


This is a really great interview.  It is reminder of what a great resource Grayson is, and of how lucky we are to have him in the hobby.  

Grayson mentions SolderSmoke a couple of times.  He talks about a thermatron version of the 40 meter direct conversion receiver.  He talks about a thermatron version of the Michigan Mighty Mite. 

Grayson notes that I am sort of averse to high voltage. I plead guilty. But I have good excuses:  I have done some homebrewing with thermatrons:   My Mate for the Mighty Midget receiver used 6U8 thermatrons.  And I have struggled (successfully) to keep my HT-37 alive in the Dominican Republic.  I have built a DX-40 and a DX-60 from hamfest parts. And decades ago, I stripped an old TV of the parts needed to build a power supply for an HW-32A SSB transceiver.  Somehow, I survived.   

But several years ago I switched to solid state gear, and I developed some bad habits.  I work on the solid state gear while energized.  With it, one hand is NOT behind my back.  I think it would be dangerous for me, at this point, to switch back to thermatrons. So I guess I will limit myself to vicarious thermatron adventures, through Grayson, his book, and his YouTube channel. 

I really liked Grayson's confession that he is just not good at working with metal chassis.  I too have mangled many of these over the years.   

And wow! Fire Hydrant on the Air! As Charlied noted: hey, it's a valve! Pete Juliano would love this idea!  

Thanks Grayson, and thanks Charlie.