Ontario Knack Story

Bill:

I think I’ve finally earned the right to contact you.  I have a really severe case of the knack.  I did not realize it until I discovered amateur radio.  My thinking is that there is no hope for those afflicted with the knack.  I believe that amateur radio helps those afflicted to deal with the condition.  It alleviates the symptoms.   

For years I wandered through the technical wilderness dabbling in physics (I have a M.Sc. in Nuclear Physics), aircraft (I was a tow pilot at a gliding club for several years), high power rockets (www.napas.net), electronics and amateur radio.  The most enjoyable part of radio is not the QSOs it’s the building and the satisfaction of a working device. 

I am relatively new to amateur radio but I’ve always had a passion for all things electronic (and technical).  I am a self-taught electronics geek and have been playing around with digital electronics (PIC microcontroller) for some time know. I starting building altimeters for high power rockets that has the capability of setting off onboard charges  to separate the rocket.  When your rocket reaches 10,000 feet, you cannot open a chute at apogee because it’s going to drift too far and you need to open the rocket at apogee (no chute) and then open the main chute at about 1000 feet to minimize drift. I routinely travel to the US to attend LDRS (large dangerous rocket ships). 

Anyway I had to get my amateur ticket for onboard video camera and trackers (beacons).  Once I got my license and got into radio, it was like a drug!! 

I am now  home brewing everything in my shack.   

When I came across Soldersmoke that was like a super drug.  I downloaded and listened to EVERY episode (seriously!).  I followed you and Mike’s journey and I learned soooo much.  I was devastated when I found out about Mike.   

You inspired me to build my own transmitter.  Earlier this year I built a 20m CW transmitter for my rocket that will eventually send telemetry (in CW from a PIC microcontroller) completely from scratch – no kits – no one’s design. Your early episodes also pushed me to learn LTSpice which I used extensively to model transmitter design of others as well as my own. I’m thinking of calling the transmitter “kaputnik”. 

My design is based on a Chinese AD9850 DDS module which generates a square wave followed by a class E amp (with a tuned circuit).  Puts out 1 watt of power with harmonics down by about 40db.  The reason I used this module with that I can easily change frequency (with mod to tuned circuit)  – after all the DDS module is programmable.  All I need to do now is clean up key clicks because the carrier is turning on too fast.  I playing around with slowly increasing the bias on the mosfet to allow the power output to increase slowly.  Any advice/tips/tricks would be appreciated. 

Next project is a remote antenna switch.   However, you have me close to tackling a SSB transceiver.

Anyway, keep up the great work and I’m looking forward to listening to another 150 episodes!! 

Take care and “stay thirsty” my friend. 

73
Dave Rajnauth, VE3OOI

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

LadyAda Named Entrepreneur of 2012

Watch this video and you will see that Limor Fried has The Knack!
She and her company have brought homebrew electronics back to lower Manhattan.
Some kind listener sent me a gift certificate for Ada Fruit.  We will put it to good use, probably
with Raspberry Pi and Arduino gear.
Three cheers for Lady Ada!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

KJ6VU Talks about Microcontrollers at Dayton

Podcast listeners will recall that George, KJ6VU, of Sierra Radio Systems, was a sponsor of SolderSmoke. When I was running George's announcements, I felt kind of bad about the fact that I really didn't have a good feel for the product, or how I might use it. I've also felt guilty about the fact that I haven't yet put to use the HamStack starter kit that George sent me.

I feel that the time is coming for me to redeem myself. The radio gods are pushing me in the direction of microcontrollers:

1) Billy is getting into them.

2) This weekend, for no apparent reason, I started working on my old N3ZI Digital Dial (a gift from Jerry, NR5A). It is built around a microprocessor.

3) I need a new frequency generator.

4) I came across George's video (above)

In the video, George does a great job of explaining how microcontrollers can be used in ham radio. In answering the last question from the audience, he explains the differences between microcontrollers and the new Raspberry Pi boards.

Great stuff! Thanks George!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20