Podcasting since 2005! Listen to Latest SolderSmoke

Sunday, November 29, 2015

A Very Unusual Explanation of AM and SSB -- What Do You Think?

Wow, I've never seen it presented this way.  Am I losing it or is this just completely wrong?   This comes from this web site:

http://www.dsprelated.com/showarticle/176.php


TRANSMITTED SSB SIGNALS
Before we illustrate SSB demodulation, it's useful to quickly review the nature of standard double-sideband amplitude modulation (AM) commercial broadcast transmissions that your car radio is designed to receive. In standard AM communication systems, an analog real-valued baseband input signal may have a spectral magnitude, for example, like that shown in Figure 2(a). Such a signal might well be a 4 kHz-wide audio output of a microphone having no spectral energy at DC (zero Hz). This baseband audio signal is multiplied, in the time domain, by a pure-tone carrier to generate what's called the modulated signal whose spectral magnitude content is given in Figure 2(b).
In this example the carrier frequency is 80 kHz, thus the transmitted AM signal contains pure-tone carrier spectral energy at ±80 kHz. The purpose of a remote AM receiver, then, is to demodulate that transmitted DSB AM signal and generate the baseband signal given in Figure 2(c). The analog demodulated audio signal could then be amplified and routed to a loudspeaker. We note at this point that the two transmitted sidebands, on either side of ±80 kHz, each contain the same audio information.
In an SSB communication system the baseband audio signal modulates a carrier, in what's called the "upper sideband" (USB) mode of transmission, such that the transmitted analog signal would have the spectrum shown in Figure 3(b). Notice in this scenario, the lower (upper) frequency edge of the baseband signal’s USB (LSB) has been translated in frequency so that it’s located at 80 kHz (-80 kHz). (The phasing method of SSB radio frequency (RF) generation is given in Appendix A.)
The purpose of a remote SSB receiver is to demodulate that transmitted SSB signal, generating the baseband audio signal given in Figure 3(c). The analog demodulated baseband signal can then be amplified and drive a loudspeaker.
In a "lower sideband" (LSB) mode of SSB transmission, the transmitted analog signal would have the spectrum shown in Figure 4(b). In this case, the upper (lower) frequency edge of the baseband signal’s LSB (USB) has been translated in frequency so that it’s located at 80 kHz (-80 kHz). The baseband signal in Figure 4(a) is real-valued, so the positive-frequency portion of its spectrum is the complex conjugate of the negative-frequency portion. Both sidebands contain the same information, and that's why LSB transmission and USB transmission communicate identical information.
And again, in the LSB mode of transmission, the remote receiver must demodulate that transmitted LSB SSB signal and generate the baseband audio signal given in Figure 4(c).

More on Light Beam Telephony


Hi Bill,

Reading about the Photophone and modulating the Sun experiments by G3ZPF reminded me of my own schooldays when as a final year physics project I think in 1970, I and another pupil built a light modulated telephone based on a design published in Practical Wireless of June 1970 by J. Thornton Lawrence. For the optical system it used a pair of spherical mirrors from old projection televisions. The detector was the expensive (for a school kid) OCP71 photo transistor, though we did also try ordinary less expensive OC71 transistors with the black paint scraped off with less success.
As David G3ZPF noted the problem with filament bulbs was the thermal inertia, and as I found it was also possible for the filament to mechanically resonate in the wooden box and start to howl. As we had never heard of, nor could have afforded an LED, we tried a Neon bulb run from an HT battery and modulated with a transformer in series with it. I recall coupling up a broadcast radio as the audio source playing "My Sweet Lord" by George Harrison and receiving it at the other end of the physics corridor very loud and clear on the audio amplifier on our light telephone receiver, much to the consternation and annoyance of the other teachers in the adjacent classrooms.

I found my black and white photo of the light telephone gear, complete with carbon telephone microphone that we used. It did work a fairly good distance in daylight outside across the school playground, not just the couple of feet shown. Also attached are photos of the original magazine cover and index, but regrettably not the article itself.

This was all before I got my ham ticket, but I already was a SWL and had been exposed to a wonderful ham, Tom GM3OWI (Oh Wild Indians) who visited the school and demonstrated all sorts of neat stuff like lighting a bulb from the output of a transmitter, and also voice modulating a klystron 3cm transmitter that the school had for doing electromagnetic radiation experiments, like polarisation, reflection etc.

Come to think of it, we got to play with a lot of stuff at school in those days which would never be allowed now, mercury, radioactive sources, alpha, beta and gamma, X-Ray and UV.  The museum in Edinburgh also had a science area with similar stuff you could play with, and get great shocks from the Van der Graff generator if you put your hand on the glass cabinet and touched the adjacent metal radiator!

Happy days!

73 David Anderson GM4JJJ

Saturday, November 28, 2015

Photophone! Modulating the Sun by G3ZPF (and Alexander Graham Bell, and Mr. A.C. Brown of London)


Yesterday David G3ZPF sent us another very interesting e-mail, this one about some very creative sunlight communication experimenting that he and his brother did many years ago.  It appears to me that David -- on his own -- came up with a version of Alexander Graham Bell's Photophone (pictured above). 

Wikipedia says that Bell's invention was the first ever wireless telephony device.   Bell credited Mr. A.C. Brown of London for the first demonstration of speech transmission by light (in 1878).  

Here is the Wikipedia article: https://en.wikipedia.org/wiki/Photophone 

I think young David's placement of the small mirror on the cone of the AF amplifier's loudspeaker was brilliant! 


Hello again Bill,

Just (literally) finished the book and a couple of surprises awaited me in the final chapters

SSDRA = $200 on Ebay
My flabber has never been so ghasted....and I have a lot of flabber. I will treat my copy with even more reverence now. Srtangely I hadn't heard about EMRFD so I'll need to look into that

Modulating light
Your story about using a laser pen in a receiver reminded me of my method of modulating light which I've never seen anyone else mention.

In the mid 60's my brother had an electronics constructor set for his birthday. After the initial fascination I probably played with it more than him. I remember reading about modulated light transmitters and (because this was before I was anywhere near getting a licence) I decided to build one. My brother was sufficiently curious to help.

We started with the receiver. I purchased an OCP71 and managed to find an old 12" headlight reflector from somewhere. The cork from a wine bottle fitted nicely into the hole at the centre, and the cork was easily drilled out to accommodate the photo-transistor.

My brother constructed the "high gain audio amplifier" project from his constructor kit and we put two legs of the photo transistor across the mic input. We were rewarded by a buzzing sound so loud our parents yelled at us from the other room. It took us a few seconds to realise we were 'receiving' the 50Hz signal off the ceiling light (the house lights were on). Waving the headlight reflector around confirmed this. I still recall the excitement we felt at our 'discovery'.

So far, so ordinary, but the TX side is where I wandered off into the outfield. Normally people modulated an incandescent bulb but this required a many watts of audio power & the 'inertia' of the filament could be a problem.

I cannot remember what prompted me to do this, but next day I pulled the speaker grill off my tiny little medium wave transistor radio and glued a small mirror (from my mothers old 'compact') to the cone of the loudspeaker.

Then we went outside into a field near our house. My brother went to the far end and I set up the lil radio on a camping stool. Moving it around until the sunlight reflected off the mirror hit the headlight reflector about 200 yards away.

Then I turned on the radio. Instantly my brother started jumping up and down excitedly. It worked. My 200mW AF amp was modulating the *SUN* !

All those guys on 160m with their 10w of AM...pah. I had GIGAwatts of power under my control :-)

Looking from the receive end it was possible to see the light from the mirror flickering & I guess the movement of the speaker cone did not move the mirror exactly in the plane of the reflected beam. The 'wobble' fooled the phototransistor into seeing an amplitude modulated beam.

The beauty of this was that only a tiny audio amp was needed. This made me wonder about such a system being used in undeveloped countries (ones with more sunshine) as a comms system, with batteries recharged by the sun.

For the UK I thought about using a slide projector to provide the illumination, instead of the sun. Again a very low power audio amp was all that was needed, and there were no 'inertia' issues to worry about it.

But I was soon to suffer a setback. A few days later the headlamp reflector, sitting on a desk in my bedroom, managed to find itself in a position to focus the suns rays onto the cork holding the photo-transistor. Cooking the transistor & setting fire to the cork. Luckily my mother smelt the burning cork before any collateral damage was caused but I had a face-chewing when I came home from school.

I'd long since forgotten about all this until reading the later chapters of your book.

regards

David G3ZPF










Friday, November 27, 2015

VK3YE's HB Superhet: Simplicity+Serendipity = Elegance



Simplicity + Serendipity = Elegance.  Indeed it does.   I would also point out that Peter's rig contains an admirable dose of ugliness (in the positive sense).  Thanks Peter!

Wednesday, November 25, 2015

Octalmania -- KG7TR's Amazing Thermatron Rigs


Grayson in Turkey alerted us to Mike's homebrew rigs:

Bill, Pete:  

Tuesday, November 24, 2015

M1GWZ's Knack Story: From Crystal Sets to BITXs



M1GWZ writes: "Just to establish my DIY radio credibility, here is a photo of my contest-winning crystal radio. Unpowered, it has logged commercial stations from Ireland to Russia, and from Northern Norway to Algeria. Excuse the mess in the background - the workshop is being re-organized!"


Carissimo Bill (I don't speak Italian. I'm just showing that I have read the book).
One of the benefits of early retirement after ten years in the electronics industry and twenty-five as a University academic is that one gets the chance to research one's interests and also have time to experiment with them. You correctly comment that you doubt you will have trouble occupying yourself in retirement - this is true, but be prepared for the frustration of not making as much progress as you would hope for! Chores still steal your time from you - and you have no excuse for avoiding them when you're retired.
I was recently alerted to the availability of your book via Kindle, but have only just got around to reading it (retirement...). It has been both a joy and a curse. Congratulations! It made fine reading in a couldn't-put-it-down way, but has also added several more items to my already-arm-length retirement project list. This, of course, is the price one pays for education and for evading the curse of boredom. As a radio ham friend of mine says with a sigh, "So many projects, so few lifetimes." As a result of reading your book, I am now pursuing satellite communication with my Yaesu handheld, and will put together a dedicated homebrew Yagi-plus-transceiver system in the New Year. The Baofeng two-bander handheld can now be had for £18 in the UK, so I can afford to dedicate one to the system permanently. Cheap technology to talk via satellites! So far, I have just been listening in - for the last three days.
I have been building radios and short wave listening since I was about nine years old.  If it wasn't for a schoolfriend's father and a crystal set, I might not be e-mailing you now. (They are still talking about killing off MW AM transmissions in the UK. Sad for kids building simple radios, but good news for European DX! Swings and roundabouts.  I'd like to give the Xtal Set Society www.midnightscience.com a mention - virtually all the recent crystal radio technology involved was discussed and developed on their forum. ) Upon graduating in 1980, I found a life without exams strange, so I took and passed my amateur radio licence exams as a way of learning more about electronics. Then life intervened (work, romance, microcomputers, marriage, job changes, son) and it was twenty years before I actually took out the licence. No Morse test so I was initially VHF / UHF only, but later the rules changed and I had a full (phone) licence. However, I only wanted to tinker about with handhelds when visiting friends in the USA (met via crystal radio forums on the internet), so my station consists only of a Yaesu VX-7R and a VX-2R (purchased at Dayton Hamvention) as a backup. I've never wanted to fork out the grand or so for an HF transceiver (although now I'm retired...), but I would like to reach out on 20 metres. Now, curse you, I realize that I have all the electronic parts to build a BITX SSB transceiver - and may have to do so. Another item on the project list...
Apart from amateur radio and DIY discrete-level DIY electronics, it turns out that we might have a couple more things in common. Through visiting the Dayton Hamvention, I now have many friends via the AMRAD club around Washington DC and have met quite a few hams from the Vienna and Loudon groups. I have attended Dayton for about the last fourteen years but circumstances change and we might now decamp to February's Hamcation in Orlando. Meanwhile, I live about four miles away from Kempton Park and have attended most of the rallies there, so there is a good chance that we two may at least have occupied the same room, albeit without actually meeting, on at least one occasion. It's a small, beautiful world.
Anyway, you're a busy man and I'm a verbose retiree, so I just wanted to thank you for the book and the inspiration it has given me to do more in ham radio. I also build DIY audio projects including (music) synthesizers, but at least I can use up a few more junkbox components before they're used to weigh down my coffin.

Regards,

Philip Miller Tate M1GWZ

Monday, November 23, 2015

G3ZPF's Knack Story: Debunking Tech Fairy Tales, Surviving Nixie Tubes and Ferric Oxide



Bill:

I'm finding the book very entertaining, and am currently about halfway
through it. Like you there were a few electronic 'fairy tales' that I
was suckered into and I was pleased to see your debunking of them. My
professional training was structural engineering so anything electronic
I picked up along the road, and was thus an easy mark for misdirection.

I still remember the first time I realized that teachers sometimes don't
understand what they're teaching, but just repeating what they were
told. At age 11 we were using a thin tube with a slug of mercury and was
told that at -273c the air under the mercury would have zero volume. I
knew it was BS, but was too young to know why. A decade later I worked
it out for myself, by accident really, and I still feel slightly
resentful about being misled. Turns out that -273c is a 'convenience'
(aka a fudge factor) which makes the combined gas law work :-p

The first electronic fairy tale I encountered was "the feed impedance of
a half-wave dipole is 72 ohms". Taught to me while studying for the UK
radio exam, and trotted out repeatedly in the RSGB magazine.

This magically mutated into 50 ohms when the Japanese rigs started to appear,
which made me a tad suspicious, and when my very young self finally
scraped enough cash together for the ARRL handbook I spotted the graph
showing variation of feed impedance with height.

I was devastated. I remember wondering why all the old guys at the club
(who I spent most Sunday mornings listening to on 160m AM as an SWL)
didn't know this.

In that instant I saw that all my hours of climbing up & down ladders;
cutting and pruning my very low dipoles to get 50ohms (bear in mind how
changeable and usually awful the UK weather is) had been utterly pointless.

From that point on I used doublets + open wire feeder. Up the ladders
just once and all tuning done in the shack in a comfy chair with a coffee
in one hand using a PROPER balanced ATU, not some shonky single ended
thing with a balun on the back.

Of course I found out about saturating balun cores the painful way (a
T200 core stays very hot for a very long time), and accidentally
discovered the current balun (which I called the idle-mans balun) at a
time when nobody distinguished between a voltage balun and a current one.

I took my inspiration from the 'coax round a ferrite ring' method of
stopping TV coax braid from conducting my RF into the TV. Fast forward
20 years and current baluns are the way to go. Its tough being a visionary.

I remember spending a weeks wages (back in the 70's) on a Fairchild
9H59DO prescaler chip for my TTL freq counter. Like you I hate chassis
bashing and the counter only went in a box after I'd had so many jolts
off the 150v rail to the nixie tubes I figured it was box-it or die :-)





The circuit of the counter was 'designed' by me lifting the simplest
version of each part of the circuit from dozens of peoples designs &
just hoping it worked. By the time I'd finished I had learned enough to
know I was lucky it did work....and what a mess spilled Ferric oxide
makes on a pale grey bedroom carpet.


When GQRP first started up a bunch of us locals used to have a 10m net.
Primarily for ragchews but also to give the newly licensed types at the
club their first ever CW QSO on air. We were all sufficiently enthused
to build a 2w xtal controlled 10m CW TX. Using a 2n3819 in the PA & 2w
meant the matching was easy to 50 ohms.



We were all within a few miles of each other so 599+, so one guy built a
half-watt version. Still 599.

I decided to go for it. Grabbed my sig genny off the shelf. It had a 50
ohm output. Lightbulb moment. Set it to 1microvolt outputans keyed the
aerial with it. 539 all round, albeit with some chirp and drift. Well, it
was a valve sig genny.

1uV across 50ohms is qrpppppp. Thats when I realised the million miles
per watt is no challenge at all when radiating extremely low powers over
short distances.

Might  be harder today though. Back then we could hear the receiver
noise floor on 10m. Not much chance of that now.

But I confess I was always far more interested in operating than
building. Never had the luxury of a workshop. Always tucked into the
corner of a bedroom. If I couldn't hold it in one hand and drill it with
the other it couldn't happen.

I remember hearing that Kennedy had been shot at the instant it
happened. I was on 20m listening to a pair of USA hams rag-chewing and
they both had the TV on. I rushed downstairs to tell my parents who told
me I was talking nonsense "or it would have been on the news". Took a
couple of hours for it to appear on our TV news.

I used to love chatting to the USA novices on 15m CW back in the late
70's. Some of those guys were real pros. You could hear them coming back
to your CQ while screwing the trimmers on their xtals to get co-channel.

I still treasure a letter I have from one youngster. It was his first
QSO outside the USA. He tells how his mom got so excited she ran into
the road telling all the neighbours her lad was talking to England.
.....yes the one in Europe :-)

Life seems a lot more cynical these days.

Even to this day I find the concept of my voice turning into electrons
which throw themselves into space and sometimes hit another piece of wire
in another country and reproduce my voice genuinely 'magical'. Sadly my
grandkids don't 'get it'. They're happy with Skype, facetime, and TXT.

The closest they came to interest was the eldest grandson (at age 10)
saying "grandad, can I have that telegraph key when you're dead?".
Sensing my surprise he added "I'm not interested in morse, but it looks
kinda cool". Now he's 20. Bought his first apartment, and his first BMW.
Making his way in the world and glued to his iPhone.

It would be kinda nice to get back onto 160m AM, but sadly the
electrical 'crud' levels in the UK are S9+ down there :-(

I spent 30 years in front of a TS930, which was able to produce proper
AM because where most rigs had one xtal filter it had pairs of them. You
slide the filters over one another to get narrower passbands for CW and
if you slide them past each other you can gget DSB or AM.

Thanks for taking the time to write your book. You've lived a very
varied and interesting life. I wrote a SciFi novel back in 1980 but at
that time there was only one scifi agent in the UK and she didnt like
it. Maybe I'll get it onto kindle one day.

I was expecting a lot of free time in retirement, but between the 3
grandkids and my 94 yr old mom I have less time than when I was working.
But despite the dodgy knees and eyesight its the best job ever :-)

Regards,

David  G3ZPF
www.g3zpf.raota.org
www.raota.org
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column