Podcasting since 2005! Listen to Latest SolderSmoke

Thursday, August 4, 2011

ARISSat Deployed



I just got back from a vacation trip to New York City (amazing place!) and found out that yesterday Russian cosmonauts launched the ARISSat amateur radio satellite. This one looks like lot of fun. It has a two meter downlink. I'll be doing some listening, and my try to get some of the SSTV signals.

Uh oh.... Just read a post from Mark over on Brainwagon reporting on some problems with the deployment:
http://brainwagon.org/2011/08/03/arissat-1-is-off-to-a-bumpy-start/

Details on how to use the satellite can be found here:
http://www.amsat.org/amsat-new/ARISSat/ARISSatHowTo.php

............................................

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Friday, July 29, 2011

Amateur radio at PAR (W4OP)

An e-mail exchange on QRP-L this morning about using ceramic resonators in 455 kHz filter circuits (great idea Grayson!) led me to the ham radio corner of the PAR electronics web site. PAR is the company run by Dale Parfitt, W4OP.
http://www.parelectronics.com/par-amateur-radio.php.
That's a nice looking 2-B Dale! Please send us the serial number! Even more impressive is Dale's award-wining homebrew solid state version of the 2-B (on the far right). Visit his web site for more info (on his site you can hover your mouse above the pieces of gear for more info).


I'm proud to say that I have a piece of gear in my shack that was built by Dale Par
fitt. The story is told in SolderSmoke The Book: I'd built my own version of Doug DeMaw's Barebones Superhet and had liked it a lot. When I saw another one (this one built on a FAR circuits board) for sale on e-bay, I bought it. It stayed on the shelf for a while. Years later when I started working on it, I turned to QRP-L for help and this fellow named Dale Parfitt came to my rescue. It was only after a long series of e-mail exchanges did we realize that the receiver we were discussing had been built (and sold to me) by... Dale Parfitt.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Wednesday, July 27, 2011

Walford Electronics' "QRP In the Country"

A stiff wind and occasional drizzle did not put off the large attendance of QRP and home building enthusiasts who attended QRP in the Country on July 17th. Hundreds of people from all over England and Holland found their way to Upton Bridge Farm, Somerset where the farm barns provided cover. About 25 stalls and displays showed off or sold everything from components to large construction projects. Apart from a few traders selling components, most displays were from Clubs publicising their activities or of ancient domestic and wartime radios, with a few individuals selling items to make space for new projects! There were also practical construction projects to be seen as ‘students’ built their Cary RXs with occasional help from the Bath Buildathon team led by Steve G0FUW. The catering team led by Tony G0GFL cooked a prodigious amount of special local burgers and sausages from the host Tim G3PCJ’s farm served in rolls baked locally that very morning, and washed down by village beer and cider, under the careful eye of Robert PA9RZ!

A raffle raised £200 for those suffering in East Africa; the main prize being a year’s subscription to PW kindly donated by Rob G3XFD which was won by Graham G4DPH. George G3RJV was asked to select a couple of displays that ‘appealed’ to him for two other prizes. The GQRP Club had kindly donated a special edition of Drew VK3XU’s latest project book which was also won by G4DPH for his PW Sprat project; a Walford Electronics Radlet CW TCVR kit went to Colin G3YHU for his valved superhet. A years subscription to BYLARA was won by SWL Mike Jones who is about to take his Foundation licence course.

After the event Tim G3PCJ said he was said delighted with the increased attendance and wished to thank everybody whose hard work had made the event so successful. He urged all Clubs within reasonable distance to plan their displays for next year! Watch the press for announcements of the date!


Any questions to:-
Tim Walford G3PCJ
walfor@globalnet.co.uk
WALFORD ELECTRONICS
www.users.globalnet.co.uk/~walfor


Designers & suppliers of kits for radio enthusiasts

Proprietor Tim Walford BSc MIEE CEng G3PCJ

-----------------
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Tuesday, July 26, 2011

How Curiosity Will Land on Mars



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Regens: A Complex Relationship; AA7EE's WBR


Bill -
I've been following your blog for a while now and am moved to let you know of my recent experience with regens, a subject that I know is dear to your heart or perhaps, more accurately, the basis of a complex relationship!
Anyway, the last time I built and owned a regen was as a teenager in the UK in the late 1970's when I had a one-tube HAC Model DX one tube regen. Recently I've been looking for a fairly simple receiver to build that would
receive CW and SSB on 40M, as well as AM. I'm developing an interest in AM on 40, a rather impractical mode in some ways, but one that I have an attachment to. A regen seemed an obvious choice, so after seeing the
reprint in "More QRP Power" of the QST article describing N1BYT's WBR regen, I decided to have a go at it.
In short, I'm so glad this was the first regen of my adult life. It is sensitive, suffers no hand-capacitance effects, has very little radiation from the antenna port due to the oscillator tank circuit being in a Wheatstone Bridge arrangement,
no microphony and to make things even better, is very stable in frequency. I can set it to a net or long-winded CW QSO and it stays there with no easily discernible drift (after a short warm-up period of course).
I know you're probably aware of this receiver, but have you tried building one? I think you'd be pleasantly surprised.
The blog post about my version of this great little receiver is here:
Yours,
Dave Richards
AA7EE

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm
Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke
Our Book Store: http://astore.amazon.com/contracross-20

Saturday, July 23, 2011

The Dish

Our man in Dayton, Bob Crane, W8SX, sent us a really beautiful picture of my favorite antenna (not the one above). Check it out: http://apod.nasa.gov/apod/ap110721.html

We talk about "The Dish" from time to time on SolderSmoke. That's the name of the movie about the role of this antenna in the reception of the TV signals for the Apollo 11 moon landing. This is -- without a doubt -- the best movie ever made about an antenna.

You can get the movie at the Gadgeteer Book Store:
http://astore.amazon.com/contracross-20?_encoding=UTF8&node=8

Check out "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm

Friday, July 22, 2011

Steve "Snort Rosin" Smith: Silver-Tongued Devil! Dual-band "Vlad the Inhaler" RX

You'll see in the comments attached to my last blog post that our man on the left coast, Steve Smith, gave that cute little Doug DeMaw/Vlad Polyakov receiver a name that might set American-Russian ham relations back a bit: He called it "Vlad The Inhaler." Good one Steve! (But you might want to stay out of the diplo game!)

It occurred to me that with the installation of one little switch in the diode part of the circuit, we could turn this into a dual-band RX. Take a look here:

http://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html

Check out "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm

Wednesday, July 20, 2011

Doug Demaw and Vlad Polyakov

I was looking through W1FB's Design Notebook the other day and I came across the above schematic for a direct conversion receiver (page 111). Note the Polyakov detector. One strange thing though: Doug was running the oscillator at the operating frequency. I thought the big advantage of the Polyakov design was that you ran the oscillator at half the operating frequency (that's why it is sometimes called a "subharmonic" detector). Any ideas on why Doug did it this way?

Check out "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm

Tuesday, July 19, 2011

Royal Order of the Sputnik Clone Chasers

Kettering Group, UK

From the Chief Designer (AA1TJ):

Fellas,

I came across an online blurb for the recent book, Sputnik: The Shock of the Century, by Paul Dickson; a worthwhile read, judging from the introduction and first chapter.

http://www.sputnikbook.net/intro.php

"Someone brought out a shortwave radio, and soon a beeping noise filled the room. A Russian scientist, Anatoli Blagonravov, confirmed it was Sputnik. "That is the voice," he said dramatically. "I recognize it." John Townsend Jr., one of the scientists at the party, recalled watching Blagonravov: "I knew him quite well, and I could tell that he was a little surprised and quite proud. My reaction was 'Damn!'"

And so an abstraction now had a voice. It also had a name - Sputnik.

Many of those at the party adjourned to the Soviet Embassy's rooftop, attempting to view Sputnik with the naked eye. Several of the American scientists drifted over to the American IGY headquarters in Washington, where they began speculating on what impact the satellite would have. They feared that the American people would be disappointed.

It also dawned on them that they had better start tracking the satellite's orbit. They got in touch with the American Radio Relay League in West Hartford, Connecticut, asking its 70,000 members-all "ham" radio operators-to lend a hand and help track the Sputnik. In less than twenty-four hours, reports on the satellite were coming back to the National Science Foundation, where a temporary control room had been established. Eventually, these hams and other amateur and professional trackers would consider themselves part of a great international fellowship known as ROOSCH, or the Royal Order of Sputnik Chasers."

That's right guys...ROOSCH...the Royal Order of Sputnik Chasers. And to think that fifty four years later a second great international fellowship would rise from the ashes...ROOSCCH, or the Royal Order of Sputnik Clone Chasers! ;o)

(BTW, October 4, 1957 is an important date in American history for a second reason. On that evening the first episode of Leave it to Beaver made its debut.)

...............................................

I thought we should also at this point remember the intrepid lads of the Kettering Group, pictured above. (Some of those dudes look like they would have been right at home in "Leave it to Beaver.") For more info on their amazing Sputnik adventures go here:
http://www.svengrahn.pp.se/trackind/getstart/oldcyts.htm
and here
http://www.svengrahn.pp.se/trackind/trackin1.htm#KEttrack


Check out "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm

Monday, July 18, 2011

Sputnik QSL from the Soviet IGY Committee

I like the reminder of Sputnik's IGY connection. This is from an article by John Foley. W7ETS, in the October 2007 issue of QST. Be sure to read the translation in the caption.

Yesterday Billy and I were at the Smithsonian Air and Space Museum's Dulles Airport center. (We volunteer to take visiting relatives to the airport IF we get to go to the Smithsonian afterwards.) We checked for Sputniks. Nyet. I think they have one on display in the main Air and Space building.

I was thinking that listening to a signal from a spacecraft should be part of the Sputnik event. The packet 2-meter signals from the International Space Station are probably the easiest to receive these days.

Check out "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htm

Saturday, July 16, 2011

Australian Antarctic Antenna Archeology

Macquarie Island
Bill,

I caught half of a report on “The 7:30 Report” on Australia’s public broadcaster ABC TV. Not knowing the full Mawson expedition story, I found this interesting. A conservation group is working to conserve the old halfway point radio repeater mast and whatever other bits have survived on Macquarie Island.

The links are to the transcript and the actual report video.

Story Transcript:

http://www.abc.net.au/7.30/content/2011/s3268909.htm

Vodcast videos. They are about 26MB in size. Theyr’e both the same video. Just two different formats.

http://mpegmedia.abc.net.au/730report/video/podcast/r799754_7027600.m4v

http://mpegmedia.abc.net.au/730report/video/podcast/r799754_7027588.wmv

John Dowdell

Yet to do the test

Sydney Australia

Friday, July 15, 2011

Cutting Edge Spectrum Analyser Video



From Alan, W2AEW. That's some great test gear! We'll have to watch our steps with Alan around -- he can ID us from the moment we hit the PTT! I hate to think what some of my creations would look like on that screen. I'd probably be immediately arrested by the FCC!
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column