Podcasting since 2005! Listen to Latest SolderSmoke

Wednesday, April 17, 2013

"The New Cool"


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tuesday, April 16, 2013

Arduino Repaired (well, sort of)




Thanks to info from Leif, KC8RWR, about the purpose of the chip that was heating up on my Arduino board (an LM386 used to determine which socket was supplying voltage for the board) I decided to try just taking the hot chip off the board.  This afternoon I fired up my reflow station and blew some 466 degree F air on that chip.  It came right off and the Arduino appears to work just fine without it.  

This was only a semi-satisfying repair.  It would have been much better if I'd really known what I was doing, and if I'd really known what was going on with that chip.  

The removed chip is up by the tip of the pen (TOO SMALL!).  The transistor and the relay that keys the transmitter are on a piece of PC board above the Arduino. 

That Arduino called CQ for me on 20 meters tonight -- Mel, K4JFF,  in Georgia responded.  Thanks Leif! And thanks again to Mark, K6HX, for the code.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Adventures with Small Computers


 
I've succumbed to the lure of the tiny computers and microprocessors.  This weekend I was playing with the Arduino that I bought (supposedly) for Billy.   You see, I have a little microprocessor-based keyer in my ten meter beacon rig (Demaw's "Lil'Slugger") .   It works fine once you get the desired Morse sequence into it, but getting that done is difficult and frustrating for someone (like me) unaccustomed to an iambic keyer.   So I was thinking that this would be easier just to replace the keyer with  an Arduino.  I was right.    With some help and advice from Billy, I got the Arduino going, and got the little LED blinking.   Then I took some code from Mark K6HX, modified it for my call-sign, and loaded it into the Arduino.  No problem at all.  Kind of fun.  And it opens your eyes to all the possible applications of this little board. 
 
Unfortunately, in the course of fooling around with the interface between the board and my rig I think I did damage to my Arduino.  I managed to blow out the blinking (pin 13) LED on the board.  I could live without that, but now the ICs get very hot (especially the little surface mount chip just below the 16 MHz crystal).   Anyone hope of fixing this?  (I've already ordered a replacement board,  but I feel guilty about this.)
 
Here's a good article describing the pros and cons of Arduino, Raspberry Pi and Beagle Bone:
 
http://blog.makezine.com/2013/04/15/arduino-uno-vs-beaglebone-vs-raspberry-pi/ 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, April 14, 2013

French Knack: F8ATA, F8KE, F8CKH, and K3DY

Hello Bill, It has been a while! I don't know if you remember but I emailed you back in September 2010, introducing myself as a fellow amateur listening to your podcasts. I had just moved from France and received back then my FCC vanity callsign K3DY.

It took me a while to get my ham shack back together but finally I was on the bands again! Recently, I started re reading your book, very inspirational. Since my very first license (as F8CKH) at 16, my interests have always been into the design / homebrew as well as QRP & CW. Why on earth would a teenager do that? I think I have the knack. My motto is: "Don't turn it on, take it apart!!!".

Anyway, it has been a lot of fun to work on some various projects (the one in progress now is a LC meter using a LCD display and a PIC 16F627). It took longer than expected to get to that point as I had to work on a PIC programmer interface as well as refresh my C language programming skills! I recently discovered that mouser is offering some nice project enclosures. In the past, my finished products were kind of "ugly" (to the average Joe not us of course!) so I am trying to work on that.

Oh also, last time I emailed you, I talked about my grand father EF8ETA, F8ATA then F8KE in the late 20s and how seeing his electronic lab and radios when I was 7 or 8 inevitably changed my life! After all this, I - had - to get my license and get involved! My father, also a ham, emailed me a picture of F8KE's shack in 1929/1930. My grand father was at the time 19 years old. Also attached to the email are two scans of his QSL cards dated as well 1929 or so. He was using a classic design for the era, based on a Hartley Oscillator. I am trying to imagine how it was to get the knowledge back then on how to build a station (TX, RX, antenna) but also how to get the parts! When people now complain that they can't finish up a homebrew project because they can't find a FT50-3 core, well they should think of how it must have been almost 100 years ago.

Have a great weekend! 73, K3DY Antoine




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, April 12, 2013

Happy World Cosmonautics Day!




Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Wednesday, April 10, 2013

Monday, April 8, 2013

A Nice Workshop in Germany


Wannabe-Choppers from Thorsten Indra on Vimeo.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Sunday, April 7, 2013

Sputnik Schematic Found!



We were searching for this last year.  Oleg, RV3GM, finally found the schematic for the transmitter in the Sputnik satellite. 

ftp://ftp.radio.ru/pub/2013/04/55.pdf


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Monday, April 1, 2013

SolderSmoke Podcast #151



SolderSmoke Podcast #151 is available.

http://soldersmoke.com/soldersmoke151.mp3

April 1, 2013

Topics:
-- Spring not yet sprung
-- Dominican nostalgia wave hits SolderSmoke HQ
-- Rebuild of my first transmitter
-- Dusting off the Barebones Superhet
-- SolderSmoke Book Corner:
      Ben Franklin by Walter Issacson
      How Arthur C. Clarke handled his Mailbag
      "The New Cool"  Dean Kamen's house/shack
      Transistor Radios by Ronald Quan
-- New SolderSmoke Advertising Campaign
-- QRP vs. QRO:
      Put 40 milliwatt "Shark Fin" QRSS rig on the air
      Being lured into QRO amp construction projects
-- Reverse Beacon Network
-- Looking for my Elmer (or his son)
-- MAILBAG



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Saturday, March 30, 2013

An update from Yi Yao, VA3YAO


We did a short article on Yi Yao a while back, noting that he definitely has The Knack.   His homebrew frequency counter (above) confirms that he does.   In a recent  e-mail from him I also detect an inclination toward poetry.  April is Poetry Month, so I thought I should share the latest from Yi:

Hi Bill,

I haven't gotten around to making my first rig yet. But, after
listening to SolderSmoke since the beginning, it seems like the universal rule
of homebrewing has been to avoid regens!

I've been focusing on mechanical design for the last while. Having
spent 2 years in a heavily electrical engineering oriented
environment, I decided to try something new.
Most of the smoke that

 I inhale these days is from cutting oil vaporizing as I turn something
on the lathe. Chips mean bits of metal that are created from cutting
metal. Soldering is done with a torch. The common thread with
electronics is the knackish pursuit of elegant design and beautiful
construction.


I've been thinking about getting myself a copy of SSDRA, but even
looking at online used book stores, this is costing in the
neighbourhood of some of my university textbooks. There's no shortage
of good information and ideas for homebrewing online though. I think
that's what I will use.

Cheers,
Yi



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Friday, March 29, 2013

Wow! Great Article on the Wow SETI Signal


Thanks to David Umbaugh (and his son!) for alerting me to this really great article in The Atlantic on one intrepid amateur who has chosen to follow-up on the famous (and possibly extraterrestrial) "Wow" signal.   You will like this article. 

http://m.theatlantic.com/technology/archive/2012/02/the-wow-signal-one-mans-search-for-setis-most-tantalizing-trace-of-alien-life/253093/


Robert Gray's book is available here:



Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column