"Robert Ford -- A British Radio Operator in Free Tibet..."

http://www.economist.com/news/obituary/21587201-robert-ford-british-radio-operator-free-tibet-died-september-20th-aged-90-robert-ford

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Nice Slide Show on BITX

https://sites.google.com/site/arvidevans/BITX_QRPacificon..pdf?attredirects=0


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX BUILD UPDATE #13 -- VIDEO TOUR

I hope to get the next podcast out within a week or so.  The BITX has been keeping me busy!


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX BUILD UPDATE #12 -- Relay and PA, BITX 17/10?

As you can see, the board is starting to fill up.  I really like it.  It seems (to me) like the canvas of a painting approaching completion. This morning I put in the T/R relay.  That space in the upper left is reserved for the driver and the IRF510 Power Amplifier.

I got some help from the Chief Designer this week.  As noted in an earlier post, Farhan  advised me to check the mixers.  I knew that I had them wired correctly and that they were in fact mixing, but when Farhan advises you to check something, YOU CHECK IT.  Farhan was right (see earlier post).

It really sounds great.  I know that the filter still has significant ripple in it, but the receiver sounds so good I'm reluctant to mess with it.  Should I de-ripple it?

On the train yesterday I was thinking about this rig, and it occurred to me that my 23.1 MHz VXO/ 5  MHz IF arrangement means that this 17 meter transceiver could also generate signals on the 10 meter band.  Of course, I'd have to build a second bandpass filter, but the radio gods guided my hand and caused me to leave space on the board for just such a filter (see above).  I realize the IRF510 PA wouldn't be too good up at those frequencies,  but when the radio gods speak, you have to listen.   

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Tek Troubleshooting Triumph

Thanks to the manual provided by Jim and the HV test gear provided by Alan Wolke, I was able to finish the troubleshoot on the broken Tek 465.   It is the HV multiplier, U1432.   The cathode voltage is supposed to be -2450.   It initially tested at -1000.    The manual calls for a jumper to be removed to take the HV Multiplier out of the circuit.  As soon as I did that, the cathode voltage went to -2500.   Bingo.

 

Now I have to get a replacement for U1432.    Any carcasses laying around?

 

Thanks guys. 

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #11 -- Peakin' and Tweakin'

Oh how I love the sound of a newly built receiver!  I'm sitting here listening to G0MJS on 17 meters.  Lots of other stations from across the pond coming in very nicely. 

Earlier in the week I had some sensitivity problems.  I could hear the noise floor, but just barely.  And the receiver just seemed to have trouble inhaling.  So I started poking around.  It seemed that each poke improved things a bit.  I had used Farhan's original schematic (mostly).   Later versions put an additional transistor in the IF amp.  So I went ahead and added that mod.  That helped a bit.  Then I noticed that BFO energy was getting into the AF amp.   So I put a .1uF cap to ground at the input to the AF preamp.  That took care of the RF and did no damage to the AF.  

But the rig still seemed a bit hard of hearing.  This morning Farhan advised me to take a look at the mixers.  I used some junk-box diodes that I didn't know too much about...  I measured the forward resistance and found it to be quite a bit higher than the usual 1N914s.  So I switched all 6 mixer diodes.  That helped noticeably.

I also checked the input bandpass filter.   It seems OK.   In the process I learned to use the EMRFD filter programs (thanks Wes) and the ELSIE filter program (also very nice).

Anyway, the rig sounds great now.   On to the transmitter.  

Farhan advises building the power amplifier on a separate copper clad board.  But I have room for it on my main board.  Should I live dangerously?   


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Occam's Microcontroller

Paul, M0XPD, has what I'm sure is a wonderful article on a simple microcontroller-based rig in the current issue of our beloved SPRAT.   I look forward to seeing it.  And I really like the logo with William of Occam (of razor fame). I have encouraged Paul to take a break from the microcontrollers and build something discrete and analog... like a BITX!  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #10 -- Darling(ton)

Having concluded that I was significantly short on overall receiver gain, I went in yesterday and changed my AF amp from a 40db direct-coupled circuit to a 100db Darlington pair.  I immediately noticed a big increase in audio output. 

I did a quick receiver alignment using my Arduino/AD9860 sig generator.  First I determined the actual bandpass of the crystal filter: 4.998170 MHz -- 5.000960 MHz.   Using a freq counter, I set the BFO at 5.00126.   I immediately started hearing 17 meter SSB signals from the West Coast.  That's always a nice moment:  first signals through a new receiver.  Kind of like "first light" in a new telescope.  Even with the filter ripple, it sounds great.

I think I'm still significantly short of gain.  Audio is still faint. I notice that in the BITX17A they have added a second transistor (Q17) in the second RX receive amp.  Maybe I should try something similar.   Or should I add some gain in the audio chain?

I'm really enjoying this BITX project. 


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Hackers' Paradise

http://hackaday.com/2013/09/23/guest-rant-ham-radio-hackers-paradise/

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

BITX Build Update #9 -- Discretion

With the exception of the PA, all of the stages of my BITX 17 are built.  Over the weekend I put in the DC wiring for the receiver and the inter-stage connections (using the Belden coax with the exposed shield and Teflon di-electric).  It looks nice. 

In my experience, almost all new superhet receivers require a certain amount of debugging and coaxing before they will work.  This one is no exception.  The VFO and the BFO work fine, and all three RF and IF amp stages are also good.  The bandpass filter  that I built passes the desired band and tunes up nicely on the right frequency.  The product detector was acting weird and wasn't balancing out properly, but I got that all sorted.  

I can put an 18.110 MHz signal at the antenna connection and see the signal go through the bandpass filter (with loss), on to the RF amp stage, to the first mixer where it meets the 23 MHz energy from the VFO.  A very messy mixture goes from the mixer to the first IF amp which sends it to the 5 MHz Cohn filter.  The filter works, but it has a lot of ripple, so I need to work on the termination impedances.  Second IF works fine, then the signal goes to the product detector.  AF comes out.  

Here's where the discretion comes in.  Instead of the LM386 chip, I built a 40db two transistor direct coupled AF amplifier. 

So it all works, but the receiver is quite deaf.  I think I just don't have enough gain in the whole system.  I looked at the schematic for the BITX-17 kit.  It very helpfully has total (net) gain figures for the RX.  I can see that my current configuration comes up short.   

Here is what I'm thinking of doing:  I might replace the 40db direct-coupled AF amp with a 100 db Darlington pair.   I really like the discrete Darlington AF amp that KD1JV has in his "all discrete" transceiver:
http://kd1jv.qrpradio.com/ADC/ADC-40.htm  Nice.  3 2N3904's driving a speaker.  I may use that.  
 
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20