Video of Pete's VERY COOL Zia Build

This is cool in so many ways:

I like the RF amp along the back with the LP filter off to the side.

The stacked PC boards are very nice.

The Display -- What can I say?

Having stations from the Philippines (DU) for the receiver demo.  Nice touch.

Mesh-like side panels!  And the plexiglass top!  Wow!

PAINTING THE COPPER-CLAD FRONT PANEL BLACK!  WOW!  BLACK IS THE NEW COPPER!

Nice feet for the rig.  Feet are key.

NO NOTICEABLE PHASE NOISE.  No Si5351 output bleed-over.

Love the name:  ZIA!!  (That was my only contribution.)

Back with the Sats: Catching Cubes with a Dongle

I've been playing around with a little $13 DVB-T SDR Dongle receiver.  These devices normally tune 24 MHz to 1.7 GHz, but I modified the first one I had so that it would tune the HF bands.   Pete then sent me another one, which I vowed to keep unmodified, thinking that it would be fun to use it to listen to the many small Cube-Sats that are up there.  Most have downlinks (and Morse Code beacons) in the 470 MHz range.   I whipped together a simple ground-plane antenna for this band (One 6 inch copper wire as the receive element with 4 five inch groundplane elements). 

 

I then went to the "Heavens Above" website, plugged in my location, and clicked on "Amateur satellites."  This gave me a very accurate schedule of satellite passes.  I started listening. 





First I heard (and saw in the HDSDR waterfall)  the CW beacon of the Prism satellite at 7:05 am EDT today.  Prism is from the University of Tokyo and was launched from Japan.

Then Cubesat XI-V at 0711 EDT.

Cubesat XI-IV was heard at 0813 EDT.  The Cubesats are from Japan and were launched from Russia.  

ITUsPAT was heard at 1422 EDT.  The I is for "Istanbul"

Finally,  I monitored a pass of the Japanese FO-29 satellite aka JAS-2 at 1611.  Wow, this was like old times on the RS-10 and RS-12 satellites.   Lots of CW and SSB stations in the downlink passband.   Lots of fun.

At 470 MHz the Doppler shift of a low-earth orbit satellite is quite noticeable, and helps confirm that you are in fact receiving sigs from an orbiting device.

I thought it was pretty cool to take a $13 DVB-T Dongle, connect it to a small, copper-wire antenna, and use it all to receive signals from some 4"x4"x4" cubes in orbit of the Earth.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Pete Puts His Zia in a Box

 

Wow, Pete really knows how to pack a lot electronics into a small box.  (He claims that he does this to justify the $250000 CNC machine!) I remain very jealous of that cool display panel. 

  

 

  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Why "Q" for Transistors?

Steve Silverman provides a possible answer:

"There are claims that, after initial chaos, eventually the letter Q was chosen because of the popular TO18/TO39 case styles."

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Another Great Rig (and Video) from Peter Parker VK3YE

Peter Parker has a double dose of The Knack:  Not only is he a great rig builder, but he is also a very skilled teacher.  His videos provide really excellent descriptions of how he selects, designs, and modifies the stages that make up his magnificent rigs.  You can learn a lot from these videos.  Thanks Peter.  

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Why are relays marked "K" on schematics?

Our official SolderSmoke etymologist and lexicographer Steve Silverman explains:

Bill

    Here is some ham radio/electronics trivia

    In the days when amateur radio used short range spark transmitters, multi-station relays were used to move a message across longer distances.  At the end of each transmission, a "K" was sent, which told the receiving operator to commence his relay to the next station. Hence the use of 'K" to designate a relay in a schematic diagram, and "end-of-transmission" for CW operators.  And hence the American Radio RELAY League

73Steve Silverman

KB3SII  ... .. ..

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Progress on Pete's "ZIA"

It is practically SPARKLING!   Beautiful job Pete.  I'm glad you are actually boxing this one up! 

Pete has many more pictures of this project here: 
http://www.n6qw.com/TIA.html

He also notes that there may have been some sub-conscious Knack wisdom at work when I dubbed his rig "The Zia."   I was thinking strictly in terms of language and ethnic heritage:  TIA stands for Termination Insensitive Amplifier.  But in Spanish it means "aunt".  But in Italian Aunt comes out as Zia.  So Pete's should be a Zia, right?  Capisce?

Well Pete puts an electronic twist on it:

"Once again you are spot on with ZIA (With  Z the electronic symbol for Impedance).  Thus Impedance (The symbol Z) Insensitive Amp. Thank You."

 Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

20% off Sale on "SolderSmoke" and "Us and Them" Books at Lulu

20% off on all print books at Lulu through June 18:

 

http://www.lulu.com/spotlight/soldersmoke  

 

Use coupon code SPLURGE

 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

Finally! An Award for QRP DSB! VK3YE's 40-40 Award

Brilliant!   Great stuff!  Lots of fun! 
Another great idea from Peter Parker, VK3YE.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20

SolderSmoke Podcast 177 Bicoastal Termination Insensitivity Unphased by Phase Noise

 

SolderSmoke Podcast #177 is available:

 

http://soldersmoke.com/soldersmoke177.mp3

 

13 June 2015

 

-- PETE JULIANO INDUCTED INTO THE QRP HALL OF FAME

-- Bench Reports:  Bicoastal Bilateral Success:  A Tale of Two Tias

    Only 3 TIA rigs in the world?  It depends...

    Relay improvements in the BITX Builds

    Straightening out amp problems

    The many uses of copper foil

    No phase noise or bleed-over troubles

    Plug-in filters

    Adjusting TIA amp gain on RX and TX (too much is not good!)

    Getting the BITX to work with the CCI amp

    Allison wisely prescribes 3 db pads 

    Curing hum by moving the power supply (duh!)

-- Farhan's New Minima -- Crying out for an Si5351?

-- Mike KL7R's Web Site is Back (thanks to W8NSA)

-- SolderLex: Rigs or Radios?  We go with Rigs

-- A ham rite of passage:  Build a Dipole!

-- What does your shack look like at the end of a project?

-- MAILBAG 

    The CORRECT pronunciation of Belthorn

    Multiplication and Division by 4

    W8NSA, Vietnam, a Transoceanic and a 9V Battery 



 

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20