Putting Junk Mail to Excellent Use: Tony G4WIF's Proto-boards

Tony's Version of Audio Section of N6QW's LBS Receiver

Tony Fishpool, G4WIF writes:

I’ve been intrigued by Pete’s matrix pad method. Of course, few of us have the machinery to mill them as Pete does, but etching is a possibility. Now some of Pete’s boards clearly have a lot of noodling behind them. His boards are quite big with little areas of pads and space between. The layout for the whole project has clearly been considered in advance.

I wanted a board that I could make modular, take little time to etch and adapt for the circumstances. These “proto-boards” are the result.

The project is Farhan’s “sweeperino” and one board is for the Si570, and the other the AD8307.

The Si570 board is now complete and working:

The PCB method is pure Chuck Adams. His videos on YouTube describe the toner transfer method better than I could.

The only difference for me is that my glossy paper comes free from travel agent brochures.

Just express a passing interest in Viking River Cruises and you will never pay for PCB paper ever again!

There is a free printing only version of the software I use, so if SolderSmoke listeners want to use the proto-board design, I will happily email them the files.

Kind regards

Tony G4WIF

A 12AU7 Atop a Raspberry Pi

http://makezine.com/2016/05/06/warm-tube-tone-is-just-what-the-raspberry-pi-has-always-been-missing/

I don't know what to say.   One moment I find myself thinking that this could represent "the best of both worlds."   A minute later I'm thinking that this thing is a horrible chimera.  And it has a whiff of audio fool-ism about it, don't you think?  Will it work better with oxygen-free cables and gold-plated fuses? 

Still, overall -- pretty cool.

Polyvaricon Reduction Drive

Oh man, we need more of these.  Many more.  Unfortunately, this may be the only one.   I pulled this out of an old piece of mystery-gear given to me back in 1994 by my friend Pericles HI8P.   Look at that:  dual turning rates, solid construction, and very small.   This device seems destined to go into my W4OP-built Barebones Superhet (in the background).

Farhan's Cool BITX 40 (video)

I especially like the wood base and the transparent front panel.  But we have to send Farhan a D-104!

Check out the video of this rig in action:

https://www.facebook.com/ashhar.farhan/videos/10153914094442107/

Farhan posted:

The BITX40 has a redesigned crystal filter at 12 MHz that contributes to a very clear signal. Note the clarity on SSB and the absence of noise due to the three poles of filtering. This was charminar net on May 2, 2016. I couldn't break-in. Probably because the tiny plug mounted mic was too far away from my mouth.

Un-modifying an S-38 in 1966, and the Urge to Build

Michael mentioned this article in the Comments section under yesterday's post.  March 1966 issue of 73 magazine.  Page 26.  Just click on the images for easier reading.   Or you can find the article here:

http://archive.org/stream/73-magazine-1966-03/03_March_1966#page/n27/mode/1up

More S38 wisdom from 73 here:

http://archive.org/stream/73-magazine-1976-11/11_November_1976#page/n89/mode/1up

That's the November 1976 issue, page 88.

I miss "73".