Watching Shortwave Broadcast Stations on the TinySA Spectrum Analyser

November 18, 2022 1244 UTC. I was using a TinySA spectrum analyzer to look at noise levels on the 40 meter ham radio band. I also wanted to take a look slightly above the band (in frequency) to see Radio Marti at 7355 kHz. As I was doing this I remembered that Vatican Radio was on the air at 7305 kHz from 1230 UTC to 1245 UTC. So was just going to catch the last moments of that day's transmissions. Sure enough, I caught it, and watched it disappear from the TinySA screen. See the video above.

Radio Marti continued on. In the morning we can hear the rooster recordings from that station. We are using it to test how well our homebrew Direct Conversion receivers avoid AM detection. In the video I mistakenly said these two transmitters were on the air with 250 megawatts. The correct power is 250 kilowatts. Both transmit from Greenville NC. I think the signal from Vatican Radio is stronger here because they are using a different antenna pattern -- Radio Marti is aimed at Cuba.

This reminds me of a cool project I have not yet done:  modifying the TinySA to allow the user to listen to the station: https://soldersmoke.blogspot.com/2021/10/how-to-listen-with-your-tinysa.html  I notice that Dean KK4DAS (my colleague in DC receiver design) was the only commenter on the blog post describing the TinySA mod. TRGHS.  We need to to do this. 

Here are the reports showing when Vatican Radio and Radio Marti were on the air on November 18, 2022: 

DC Receiver: 100db Gain? Diplexer? VFO in a box?

Here is a progress report on Direct Conversion Receiver developments. Dual Tuned Circuit, Diode Ring with Diplexer, PTO VFO from Farhan's Daylight rig, two stage 49 db BJT AF amp with a transformer. It works very well. I discuss: Shielding of the VFO -- necessary or not? Why brass in the PTO? Do we really need 100db in a receiver, especially with ear buds? Sourcing the AF amplifier's transformer. Using W7EL's diplexer. (I think it has solved my Radio Marti breakthrough problem). Developing a DC RX circuit that can be built by students. I end with a bandsweep of 40 meters that includes CW, FT-8, SSB, and AM

How the Diode Ring Multiplies by 1 and -1 -- "The Secrets of the Diode Ring" -- Plus another Bandsweep with the DC RX

A deeper look into how the Diode Ring detector works: "the particular go of it." Here I rely on a wonderful diagram from the RSGB. This diagram clearly shows how in this circuit, the switching action of the diodes -- controlled by the VFO -- results in sum and difference frequencies at the output. This is amazingly illuminating. I then tried to build this actual circuit. It works, but I am also getting a lot of AM breakthrough from a local AM station (WFAX) and Radio Marti at 7335 kHz. I will try again. In any case, the diagram shows how the diode ring does its thing! I need to beef up the Band Pass Filter. I tuned around a bit on 40 meters -- you can listen. Students at a local high school have been trying to get the DC receiver I loaned to them going -- they may be confused by the intricacies of SSB tuning. I will see them next week.

Here is the RSGB diagram that reveals the secrets of the Diode Ring.  (Now that could be the title of a book or movie.  I claim the rights to that!)  Click on the image for a better view. 

Bandsweep with the New Homebrew 40 meter Direct Conversion Receiver

It is inhaling nicely but some improvements are still pending. Click on the video above to see and listen to the bandsweep done on 40 this morning. 

-- The front end consists of capacitive divider input impedance matching circuit, followed by one LC circuit and an FET RF amp.  

-- The VFO is a super-simple Colpitts design by Farhan.   The two feedback capacitors do double duty in the LC tan circuit.  

-- I am using an old variable capacitor instead of the PTOs that we have been experimenting with.  

-- The mixer is singly balanced using one trifilar toroid and two diodes.  We have found out that even with these three simple devices, there is significant variation in how people connect them to VFO, RF in and audio out.  I think we have found the best way to do this:  Be sure to put the VFO on the primary of the transformer, and let this signal turn the diodes on and off. 

-- For the AF amplification, I have one FET, followed by two BJTs.  I have a small audio transformer between the speaker and the final AF amp.  There is plenty of audio. 

You may wonder why, after all the SSB superhet transceivers, I am building a simple Direct Conversion receiver.  Well, we hope to help a bunch of high school kids build one, so we need to be really familiar with how it works.  And I find that as simple as it is, there is still a lot to learn in a project like this. 

Daylight Again on the Sunrise Net! Walter KA4KXX Builds a PTO

Dear Bill: 

I had never built a PTO, but after reading Farhan's Daylight Again Transceiver article I cobbled one together with parts and pieces I had on hand. My observations so far are as follows. 

1. The frequency-determining capacitors (shown on the schematic as three 470 pf) are very critical, so I feel the usual experimental cut-and-try technique is a must, even using all NP0 and C0G types. 

2. After I built the 2 MHz version like the article (see first photo), the stability was terrific, but when I tried building the companion Daylight Again crystal filter, I was only able to get a bandwidth of 1.6 kHz, which is too narrow for my taste in an SSB radio, so I decided to build the same filter design but with 11 MHz crystals, where I could easily achieve a 2.8 KHz BW. 

3. Therefore, now I needed a higher frequency VFO, so I merely reduced the capacitance (from about 1200 to 370 pf) without changing the coil and I am very impressed with the performance of my 4 MHz PTO (see second photo). The bandspread easily covers the entire 40M band, CW and Phone. 

4. However, whenever I transmit on the 40M Phone band, I like to first set my VFO within 10 Hz of the operating frequency. That way, if I talk for five minutes or so and get up to 15 Hz of drift (which is quite common with many radios when I operate portable outdoors in the sun and wind), it will not be noticable and I avoid receiving any "you are off-frequency" chastising. But the shortcoming I have with this PTO inductor is that the 1/4-20 bolt has a coarse thread, so it is very difficult for an old fellow like me to get within even 20 Hz of a particular frequency just using this common bolt. Therefore I believe a better choice would be the fine thread 1/4-28 two-inch brass threaded bolt which is available from industrial supply houses like McMaster-Carr. However, for CW use or those with a very steady hand, the 1/4-20 works well enough. 

5. I solved my fine tuning problem by adding a varactor circuit using a common 1N914 diode in series with a 100 pf capacitor, operating from 0 to 6 volts. Another advantage to adding this feature is that since I have not so far enclosed my PTO, I can mount the varactor potentiometer several inches from the PTO so my hand capacitance does not affect the frequency like when tuning with the bolt. 

6. An easy way to "do the math" in my case with the common Sanjian counters is to simply create a small lookup table listing half a dozen common frequencies and stick it on the radio. For example, 90% of the time in the morning I am tuned to my favorite SouthCars Net frequency of 7251, so using a BFO setting of 10,999.900, I simply set the PTO to 3,748.90 on the 6-digit 10 Hz resolution counter I normally use (see third photo). 

7. I am currently using my Daylight Again PTO on a daily basis with an NE602 receiver, and I am thinking of adding a locknut to the bolt so it does not wiggle when I jostle or move the radio, essentially giving me a crystal replacement oscillator that I can use for any single 40M frequency. To date I have been able to listen for hours at a time indoors without even any touch-up of the varactor fine tuning. 

8. Also, if continuous frequency readout is desired without building a noise filter circuit board, a separate power supply for the counter is a solution. For portable operation I use Lithium Polymer radio control model airplane batteries which are light, small, and cheap, so one 12V 2000 mAH battery for the transceiver (allows a half hour of transmitting at 15 watts) and a much smaller 12V 350 mAH battery with a series resistor to reduce the current and brightness of the counter has worked well for me. 

73, Walter KA4KXX 

Orlando, FL

SolderSmoke Podcast #239: Hex DX, VFO Temp Comp, DC RX, Polyakov!, DX-100, Wireless Set, Farhan's "Daylight Again" HDR rig, MAILBAG

N2CQR Hex Beam Aimed at Europe

SolderSmoke #239 is available for download: 

http://soldersmoke.com/soldersmoke239.mp3

TRAVELOGUE: 

James Webb Space Telescope.  Mars returning to opposition in early December.   

BILL'S BENCH

Hex Beam K4KIO - on roof – TV Rotor – 20-17-12  Lots of fun.  Working Japan regularly, Australia, South Africa on long path 17,000 miles.  52 countries SSB since July 11.

VFOs and Temp stabilization.  Dean KK4DAS found my ceramic resonator VFO for DC receiver drifty. He was right.  So I built a real LC Colpitts VFO.  Got me into temp stabilization.  A new hobby!  An obsession.  HT-37 and Ht-32 parts. Ovens?  WU2D’s second VFO video.  Understanding thermal drift and how to address it. Split stator caps.  Cut and try.  

Built a Polyakov DC Receiver. https://soldersmoke.blogspot.com/2010/03/polyakov-plus-dual-band-receiver-with.html  Lauser Plus.  Lauser = Imp or Young Rascal!  DK2RS.  He used a ceramic Resonator VXO at 3.58 MHz.   Mine works great on 40 with VFO running 3.5 -- 3.65 MHz. See schematic below. 

On 40 AM with DX-100 and MMMRX.  DX-100 died.  12BY7 VFO buffer went bad.  How common is failure in this tube type?  Nice QSO with Tim WA1HLR about the DX-100.

Got my Dominican license:  HI7/N2CQR!  SSSS on the way.   Thanks to Radio Club Dominicano and INDOTEL.

Getting more active in the Vienna Wireless Society.  

BOOK REVIEW:  

"The History of the Universe in 21 Stars” by Giles Sparrow.  Written during the pandemic.  Published by Welbeck, in London. https://www.amazon.com/History-Universe-21-Stars-imposters/dp/1787394654  Also:  From “Atoms to Amperes” by F.A. Wilson available for download.  See blog.

SHAMELESS COMMERCE DIVISION:   

Todd K7TFC getting ready to launch “Mostly DIY RF.”   I used his TIA boards in my 1712 rig.  He will have boards like this and much more.  Stay tuned.

I need more viewers on YouTube.  They want 4,000 hours IN A CALENDAR YEAR!  Please watch!

FARHAN’S NEW “DAYLIGHT AGAIN” RIG.  Analog.  VFO.   Comments, observations. We need to get him on the podcast.  Maybe two shows: SDR and HDR. 

PETE'S BENCH

Time very limited. But still sharing lots of tribal wisdom.

Wireless set with tubes!

Tool recommendation – Air compressor

 MAILBAG:

Farhan VU2ESE – Speaking of big antennas “Whenever I look at the huge construction cranes in Hyderabad, I always think how one could make 160m, 4 element yagi using it as a boom..”

Todd K7TFC in Spain, spotting Log Periodics in Madrid.

Andreas DL1AJG:  Can Biologists fix Radios?

Janis AB2RA Wireless Girl.  Expert on Hammarlunds.  And was my first contact with the Tuna Tin 2. She too was HB!

Peter Parker VK3YE on Owen Duffy VK1OD

Lex PH2LB on homebrew radio

Would this really be homebrew?  Mail from H-A-D article on FM receiver

F4IET a DSB rig from France

Ciprian got his ticket YO6DXE    

Josh G3MOT sent us a good video about the Vanguard satellite and IGY.

Dave Wilcox K8WPE bought Chuck Penson’s Heathkit book.

Rogier -- So many great articles and links from PA1ZZ

Bill AH6FC  Aloha. Retiring.  Wants to build.  Mahalo!

Grayson KJ7UM  Working on an Si5351.  Gasp.

Mike KE0TPE viewing YouTube while monitoring 6 meters.   He will have a lot of time to watch!

Chris KD4PBJ spotted Don KM4UDX from VWS FB

Mark WB8YMV building a superhet.  Having trouble with 455 kc IF can filter.

Walter KA4KXX Great comment on the Daylight Again rig. 

Ramakrishnan Now VU2JXN was VU3RDD.  Found lost Kindle with SolderSmoke book on it. Building SDR rig from junk box.  Trouble with the LM386. 

Pete, Farhan and Tony:  Shelves of Shame

Daylight Again by Farhan

The Polyakov receiver I built yesterday (from SPRAT 110, 2002!)

Farhan Takes us Back into the Daylight -- An Analog Rig with a Homebrew Crystal Filter and an LC VFO

 

There is so much radio goodness in this rig and in the blog post that describes it.  Farhan's blog post will keep us busy for a long time.  There is much to learn there.  But perhaps even more important is his larger view of the role of analog circuitry in ham radio.  Here are a couple of excerpts from his introduction: 

 Here is the memo : The analog never died. The world is analog all the way, until you descend into Quantum madness. The antennas are analog, Maxwell died a content, analog man. Our radios, ultimately, are analog machines and we are all analog beasts too. Amateur Radio technology has evolved into the digital domain. However,  it has only made it easier for us to do analog with computers to simulate and print our circuits.  So, it’s time to bid good bye to our Arduinos and Raspberry Pis and build an Analog Radio for ourselves. So let’s see what we can achieve in hindsight, a return to our native land and a rethink of our approaches. The radio is called Daylight Again, a nod to being back at the FDIM in 2022 after a gap of two years. It is named after the Crosby, Stills, Nash and Young’s song that had been humming all the time while put this radio together, emerging after 2 years of lockdown.  This radio that took two days to come together, no actually two years! That’s: parts of it got built and stowed away, thoughts were struck in the shower, questions popped up during early morning cycle rides and notes and circuits were scribbled in the notebook.  I must take the first of many diversion here: I hope you all maintain a notebook. Write down the date and whatever you thought or did on the bench and the result. Nothing is trivial enough to leave out. Wisdom comes to those who write notes.  I started to build this on Saturday the 14th May and I checked into the local SSB net on Monday morning, the 16th May 2022.

AND

Having clean VFO  is the most important way of increasing the dynamic range of your radio. A free running JEFT VFO that has sufficient power and a good Q components, will be unmatched by any synthesized or direct sampling radios. The math is all on the side of the free running VFO. We are talking -150 db/Hz at 10 KHz spacing, by comparison the Si5351 is -125 db/Hz, it is 300 times worse.

That is just part of the intro.  We should all study the rest of Farhan's blog post very carefully and incorporate the wisdom into our new rigs: 

Here is the blog site: 

https://www.vu2ese.com/index.php/2022/08/04/daylight-an-all-analog-radio/

Enough of the darkness.  Step into the daylight my friends. 

Pete N6QW's Hybrid Wireless Set -- A Thing of Beauty, with Thermatrons

Pete Juliano is amazing.  He is admirably carrying a very heavy load of family responsibilities.  But  he still can build some really unique and innovative rigs.  He tells us that getting up at 3 am and only sleeping 5 hours per night allows him to do this.

Pete also blames Grayson Evans KJ7UM for this rig, what with the thrematrons and all.  Pete has a 7360 mixer in this rig, something that Grayson had in the 3rd edition of his Hollow-State Design book (get yours here:  https://www.ermag.com/product/hollow-state-design-2nd-edition/).  Pete reports that he first built the chassis for the tube (I mean thermatron) portion of the rig in the 1970s -- it has been in his junkbox ever since.  Grayson admires Pete's compact construction and point-to-point wiring.  

I too noticed very poor conditions on Field Day this year.  

Three cheers for Pete Juliano!  

W8ZAP on 40 AM with a Collins 20V3 Broadcast Transmitter

 

I was on 40 AM yesterday morning and I talked to Jerry W8ZAP (great callsign) out in Michigan.  Jerry was running his Collins 20V3 (above on the right), which was originally an AM broadcast band transmitter.  FB.  

Here is Jerry's QRZ.com page: https://www.qrz.com/db/W8ZAP

More info on the 20V3: https://collinsaerospacemuseum.org/products/product_sheets/20V-3%20AM%20Transmitter%20Product%20Sheet.pdf 

HF Bandsweep with the Hammarlund HQ-100 (video)

It has been a while since we last did a bandsweep.  Too long.  Here is one using my recently fixed up Hammarlund HQ-100.  Repair details are in recent videos. 

For this bandsweep we cover most of the HF band and even briefly dip down into the AM broadcast band: 

Demonstration of the Hammarlund HQ-100: Radio Marti, 40 meter AM, 40 Meter SSB, 40 meter FT-8, 40 meter CW with and without the Q multiplier, classical music on WRMI, WFAX 1220 kHz AM, WWV 20 MHz, CB!, 17 meter SSB, the 20 meter BS position, the effect of AVC and the Noise Limiter, SSB with the internal BFO and with the Q multiplier as BFO. CW with the internal BFO AND the Q multiplier. 

Be sure to subscribe to the YouTube channel.  

Young Jean Shepherd Gets Hung-Up On Ham Radio

Oh man, we've all been there:  OBSESSION with ham radio.  Shep went over the top and didn't sleep all weekend when his homebrew transmitter was finally neutralized and started to put out a decent signal on 40 meter CW.  

One of my favorite lines in this episode is about how, before the neutralization, the transmitter had had so many parasitics that it would continue to transmit for two hours AFTER Shep turned it off, "and all on the wrong frequencies."  

I found this while searching for other Shep references to Johnny Anderson, the guy who built the TV receiver.  Please let me know if you know of any other Shep references to Johnny. 

Here is the program.  Skip ahead to 20:50 

https://www.radioechoes.com/?page=play_download&mode=play&dl_mp3folder=T&dl_file=the_jean_shepherd_show_1963-03-07_hung_up-ham_radio.mp3&dl_series=The%20Jean%20Shepherd%20Show&dl_title=Hung%20Up-Ham%20Radio&dl_date=1963.03.07&dl_size=8.87%20MB

EXCELSIOR!  

The Homebrew Spirit of the Radio Amateur

I just liked this picture.  It seems to capture the pride and satisfaction that comes from getting on the air with homebrew gear. It's obviously a simple QRP station, but it is all homebrew.  And -- from the QSL cards on the wall -- we can see that he has had some success with it.  The map on the wall is of the United States and the QSLs are from the east coast and the mid-west, so my guess is that he's probably on 80 or 40.   FB OM.  

Argentine SSB (BLU) Homebrew from Guillermo LW3DYL

Really nice work.  BLU is Spanish for SSB.  (Juliano BLU?)

But I think Guillermo needs to build ONE MORE BOARD!  A VFO or a VXO.  Analog. To finish the job.    Guillermo tells me this is in the works -- he selected an IF of 11.0592 MHz specifically so that he can use a variable oscillator built around a 4 MHz ceramic resonator.  

Complete schematic and PC board patterns on his site: 

https://qrplw3dyl.blogspot.com/2021/04/transceptor-blu-para-40-metros.html?fbclid=IwAR0BLMVfVTxMlVy1WyUovVJ0FVrrkMulFxeuu24lkjdkW8j-6QX5g_yV05o

Click on the Bloc Diagram for a Better View:

N6QW On 40 Meters with a Civil Air Patrol Dentron Scout -- WYKSYCDS

 

Pete is in the air with his Dentron Scout.   Check it out: 

http://n6qw.blogspot.com/2021/04/2021-conversion-of-dentron-hf-scout-is.html

WYKSYCDS = When You Know Stuff You Can Do Stuff.  Pete proves it.  

SolderSmoke Podcast #227: Solar System, SDR, Simple SSB, HA-600A, BITX17, Nesting Moxons? Mailbag

SolderSmoke Podcast #227 is available: 

http://soldersmoke.com/soldersmoke227.mp3

Travelogue

Mars is moving away.  Jupiter and Saturn close in the sky.  And the Sun is back in action – Cycle 25 is underway.  Also, the earliest sunset is behind us.  Brighter days are ahead.

Book Review:  “Conquering the Electron”   With a quote from Nikola Tesla. 

No real travel for us:   Hunkered down.  Lots of COVID cases around us.  Friends, relatives, neighbors.  Be careful.  You don’t want to be make it through 10 months of pandemic only to get sick at the very end.  SITS: Stay In The Shack. 

Pete's Bench and Tech Adventures:  

 Backpack SDR  keithsdr@groups.io

 Hermes Lite 2

 Coaching SSB builders

 G-QRP talk  

 A new source for 9 MHz crystal filters

 Bill's Bench: 

Fixing the HA-600A Product Detector.  Sherwood article advice. Diode Ring wins the day.  Fixing a scratchy variable capacitor.  Studying simple two diode singly balanced detectors.  Polyakov.  Getting San Jian frequency counter for it.

 

Fixing up the 17 meter BITX.  Expanding the VXO coverage.  Using it with NA5B's KiwiSDR. 

Resurrecting the 17 meter Moxon.  But WHY can't I nest the 17 meter Moxon inside a 20 meter Moxon?  They do it with Hex beams.  Why so hard with Moxons? DK7ZB has a design, but I've often heard that this combo is problematic.  Any thoughts?   I could just buy a 20/17 Hex-beam but this seems kind of heretical for a HB station.

Suddenly getting RFI on 40 meters.  Every 50-60 Hz. Please tell me what you think this is (I played a recording).  

MAILBAG:  

Dean KK4DAS’s Furlough 40/20

Adam N0ZIB HB DC TCVR

Tony G4WIF  G-QRP Vids.  Video of George Dobbs. 

Grayson KJ7UM Collecting Radioactive OA2s. Why?

Pete found W6BLZ Articles

Rogier KJ6ETL PA1ZZ lost his dog.  And we lost ours. 

Steve Silverman KB3SII -- a nice old variable capacitor from Chelsea Radio Company. 

Dave K8WPE thinks we already have a cult following.

Dan W4ERF paralleling amps to improve SNR. 

Jim W8NSA -- An old friend. 

Pete Eaton   WB9FLW    The Arecibo collapse 

John WB4GTW old friend... friend of: 

Taylor N4TD HB2HB  

And finally, we got lots of mail about our editorial.   No surprise: Half supportive, half opposed.  Obviously everyone is entitled to their opinion.  And we are free to express ours.  It’s a free country, and we want it to stay that way. That is why we spoke out.

Yesterday the Electoral College voted, finalizing the results.  All Americans should be proud that the U.S. was able to carry out a free and fair national election with record turn out under difficult circumstances. And all loyal Americans should accept the results. That’s just the way it works in a democracy.

We are glad we said what we said. It would have been easier and more pleasant to just bury our heads in the sand and say nothing.  But this was a critically important election and we felt obligated as Americans to speak out.  We'd do it again. And in fact we reserve the right to speak out again if a similarly important issue arises.  

HB-2-HB Contact! N4TD's Amazing Homebrew 20 and 40 meter SSB Transceiver

 

Oh man, this doesn't happen every day.  Using my homebrew BITX 40 DIGI-TIA,  I had just finished a great QSO on 40 meters with Greg W8GP, talking about Heathkits and homebrew radio.   Then I got a call from Taylor N4TD.  He told me he is a SolderSmoke listener.  Then he just casually mentioned the really big news:  HE TOO WAS ON A HOMEBREW RIG! 

I told Taylor that this a rare occurrence.  He agreed. 

Taylor told me his rig is for 20 and 40.  It is a single conversion design with a 9 MHz IF and a crystal filter.  Using a Ukraine-made PA board, it puts out 50 watts.  

Taylor sent me some pictures and wrote: 

Hi Bill,

It was great to work you homebrew to homebrew.  As you said, that doesn’t happen very often.  I used a modular architecture for this radio.  The module size is the ExpressPCB miniboard  size, so they are less expensive and all the same size so they can be moved around.  All the boards are homebrew except for the final amplifier module.  The PA module I got from 60dbm in Ukraine through eBay.  I had tested this module before and found it to be solid, and it was more economical than building the PA from scratch.  It delivers 50W+ and has been reliable through all my sometimes abusive testing.  

73 Taylor N4TD

Taylors rig -- Top view

Taylor's rig -- Bottom view

A Suitcase Portable 40 Meter CW Station from 1951

 

Wow.  Check this out:

http://www.skywaves.ar88.net/homebrew/W9FKC.pdf

A very nice  rig built by an amazing homebrewer 

And thanks to Al Klase N3FRQ for putting that wonderful web site together. 

Teddy Roosevelt on Homebrewing: "The Ham in the Arena"

"It is not the critic who counts; not the sharp-tongued appliance operator who points out how the homebrewer stumbles, or where the builder of rigs could have built them better. The credit belongs to the ham who is actually melting solder, whose fingers are marked by burns and glue and blood; who strives valiantly; who errs, who splatters and distorts again and again, because there is no homebrewing without error and shortcoming; but who does actually strive to build and improve his rigs; who knows great enthusiasms, the great devotions; who spends himself in a worthy project; who at the best knows in the end the triumph of saying “rig here is homebrew,” and who at the worst, if he fails, at least fails while daring to try, so that his place shall never be with those cold and timid amateurs who never try to build anything, but who only stare at their waterfalls, ready to pounce on those who do."

See also: 

https://en.wikipedia.org/wiki/Citizenship_in_a_Republic#:~:text=It%20is%20not%20the%20critic,could%20have%20done%20them%20better.

Overcoming the Complexity of the Michigan Mighty Mite: Walter's Sunrise Net Special

From Walter KA4KXX
June 21, 2020

Michigan Mighty-Mite:  Why So Complicated?

The April 2020 issue of QRP Quarterly magazine featured an article by Bob Rosier K4OCE which included a schematic for a “Ten Minute Transmitter” by G4RAW (SK), which apparently first appeared in SPRAT 82 in 1996. 
It is even simpler than the Michigan Mighty Mite, so this transmitter can truly be built on a solderless breadboard in about 15 minutes, because a complex coil is not required.  
The only tuning needed was for me to establish the correct value of the output series capacitor. 
This rig allowed me to check-in to the Sunrise Net (see details in blue text on my QRZ page) today on my very first attempt, and landed me a 549 signal report from 250 miles away.
The first photo shows the transmitter connected to a Transmit/Receive Switch mounted in an Altoids box. In the Transmit position the antenna is disconnected from my 1979 Heathkit HR-1680 receiver, which then coincidentally supplies a sidetone at an ideal volume level.  That little black pushbutton which can be seen in the second photo serves as my key, and works just fine for a five-minute daily QNI on the Sunrise Net.
Of course, part of the secret is having a crystal exactly on the Net frequency, and I have a few left, free to whomever in the Eastern U.S. is interested in building one of these simple Sunrise Net Special Transmitters and participating in our Net. 

Video on Galaxy V VFO IN USE with BITX40 Module -- 40 meter Bandsweep

Check out that fancy frequency readout.   No glowing numerals here.  But it does the job.