The Soul of the Old Machine

I continue to peruse the stack of Electric Radio magazines that Armand WA1UQO gave me last month.   Great stuff.  I'm really struck by how much of our ham radio history is captured in the pages of ER... and nowhere else.  This is a resource that should be protected.

In the last podcast I shared a few lines from the "Amateur Radio SSB -- The First Fifty Years" series or articles.  Today at lunch time I was reading the March 1994 issue, there was an article by Don Meadows N6DM entitled "A Homebrew CW Receiver."  From the last paragraph:

"This homebrew receiver as the main station receiver until 1975... In 1989 the homebrew receiver was finally mothballed... In its place I acquired an imported box that does everything.  This box is friendly and cooperative, but I have no rapport with its soul. When it ultimately falters, it will need to be cured in the manufacturers sanitarium for sick gear instead of on my own workbench.

I've always been proud of this homebrew receiver. It did its job exceedingly well. Retrieving recently this old friend from storage for photographs, cleaning out the dust and dead insects, inspecting its wiring up close --  all this evoked fond memories."

Stepping Inside an AM Transmitter (video)

Very cool video.  We have visited VE7ZWZ's amazing shack before. This time he takes us inside a BIG commercial AM transmitter that he has modified for use on the amateur bands.

I know that he had the plate voltage turned off, but I still felt myself cringing when he reached up to touch the plate connectors on those enormous thermatrons.  The filaments were on, adding to my unease.  Dude, don't do that! And if you are standing INSIDE the transmitter, keeping one hand behind your back might not be as beneficial as it normally would be.

His comments on his VFO were interesting.  I was kind of disappointed that he went with a varactor circuit.  A varactor?   Amidst all those bread slicer variable caps?  It just doesn't seem right.  (And BTW they are bread slicers, NOT "potato slicers.")  But I kind of liked the heater--thermistor--insulation set up that keeps the VFO at constant temperature.

I thought it was interesting that these transmitters were kept on, with the tubes glowing for years at a time.

Thanks Mr. Carlson, for another great video! 

Very Useful Toroid Info Web Site

This site provides the kind of info we need when working with toroids.  It even tells you the length of wire to cut. It links to the W8DIZ "Toroid King" website, but I can't really tell if this site is the work of DIZ himself.   In any case, very useful.  We award this site our coveted rating of "Five Soldering Irons."

http://toroids.info/FT37-43.php

Video of a REAL Homebrew QRP Contact (by WU2D)

I think Mike's video does a good job of showing what it is really like to get on the air with simple, homebrew QRP gear.   It takes some patience and operating skill.  I guess it is sort of like fly fishing (with home made lures); there are easier ways to catch fish, but they are not as rewarding.   

Discrete Dead-Bug O'scope Pong

Thanks to Bent KD0GLS for alerting us to this excellent example of the awesome power of discrete transistors and dead--bug construction.

Check it out.  There is a video.

https://www.eevblog.com/forum/projects/oscilloscope-pong-for-1-or-2-players/

Another Excellent QRP Video from WU2D -- Retro Solid State QRP Receivers

Hot Water BITX 40

Fred's idea really resonated with me.   My first SSB rig was an HW-32A, the 20 meter version of the rig shown above.  If -- as I suspect -- these rigs are anything like the HW-101, they are not aging well. Heath's drive for economy resulted in rigs that don't hold up to well over time. I remember the sound of the  plastic HW-101 dial clutch cracking when I pushed the button.

BITX40 Modules to the rescue! Put a mono-band board inside an old mono-band rig.   There are a lot of possibility here.  Some ideas:

-- Put that Heath VFO to use.  Maybe convert it to solid state.  Or just put the LCD from an Si5351 in the window (Pete did this with an HW-101).

-- Get the S-Meter wiggling.  

-- Keep the final amplifier circuitry in there and let the BITX drive it.  This will give you a QRO option.  (Uh oh, we're in trouble again!)   

Hello Fellows,

Attached is a picture of my BITX-40 V3 adapted to a Heath kit Single Bander HW22. This is a work in progress but what a neat way to bring an old boat anchor into the present.

 

The only parts of the HW 22 used were the front panel and case and knobs. Modifications yet to be  incorporated include: AGC , a USB port on the front panel to access the Arduino, and a PTT/CW mode switch.

 

I enjoy your pod cast and web site…Best of 73 KC5RT.

Hearing the Roosters from Boa Vista, Brazil

The ham radio day got off to a good start at N2CQR yesterday.  40 meters was open in the morning and PV8AL was calling CQ.  Helio had a strong signal, due in large part to his 3 element 40 meter yagi.   Helio lives on a farm outside Boa Vista,  Brazil. As he spoke, I could clearly hear the roosters crowing in the Amazonian dawn.  Very cool.  It brought me back to mornings in the Dominican Republic, and in Central America. It also reminded me of one of my first DSB contacts from the Azores -- I could hear the parakeets of Amadeu CT2HGL in Coimbra, Continental Portugal.  Obrigado Helio!  Obrigado Amadeu!

Fast Radio Bursts and the Molonglo Radio Telescope (with video)

7,744 circular dipoles on 843 MHz  feeding 176 preamplifiers and 88 IF amplifiers!

Read about how the Molonglo Radio Telescope has recently been used to study the mysterious Fast Radio Bursts:
http://www.sciencealert.com/confirmed-mysterious-radio-bursts-detected-by-astronomers-really-are-coming-from-outer-space

There is a Grote Reber connection:
https://en.wikipedia.org/wiki/Molonglo_Observatory_Synthesis_Telescope

SolderSmoke Podcast #195: (We need some help!) BITX, 60, SSB History, Tribal Socketry

SENDING IT BACK

SolderSmoke Podcast #195 is available.  Link appears below (scroll down)

We’ve got a problem:   Pete Juliano and the QRP Hall of Fame  :-(  PLEASE HELP!

BENCH REPORTS

Pete Releases Smoke (wiring harness)

Pete's DifX on 60

Architecture and Dual Conversion (uBITX:   uses ALL THREE clocks on the Si5351)

The Big Kahuna

ON HACKADAY with Philco SB100 SEE!  QRP!!!!!

BITX60

Cap Stack Hack mod (with leads)

Let the smoke out of an Si5351 (shorted output) Several actually.

(Same day delivery zone for Amazon -- but no drones or parachutes yet.)

Installed scanning switch

Observations on 60.  All the weird bands have a 6 in them: 160, 60, 6

The good:  100 watt limit, wire antennas 
The bad:  Kind of cliquish-- like 75, not much of a CQ band.  Channels.  Not much activity.

Met Josh KE8CPD on 40.  BITX 40!

TRIBAL KNOWLEDGE:

Socketry:  How to keep BNC jacks from spinning loose?

Do you heat shrink?

Feel Tech Sig Gen might not have blocking cap at the output.

Speaking of which, when I spoke of the Ne602, I mostly meant blocking caps, not bypass caps.

How come they don't have a cable TV channel devoted to radios?  They have HGTV? Why not HBTV?

REPORT FROM WINTERFEST

Bad weather.  Tailgaters wimped out!

Combined forces with Armand WA1UQO.

Met up with Charles AI4OT.

Acquisitions:  1/4 phono jacks, carbon mic, vero board, disc caps, weather radio,

LARGE collection of Electric Radios from Armand.  Wow.

Electric Radio notes:   1st Fifty Years of Sideband 1991 articles by Jim Musgrove K5BZH

Why LSB on 75? -- so AMers couldn't follow to top of band

W2, W6, W8s liked phasing, W3, W4, W0 more into filter rigs.

Early SSB guys turning on carrier and talking AM hams into SSB RX.

Kelvinator Refrigerator rigs.

A reading on the homebrewing of SSB rigs.

Tony Fishpool on QSO Today!  Pete mentioned prominently.

Good Hacks from ND6T on BITXHacks,   Stockton Bridge

MAILBAG

LINK:  http://soldersmoke.com/soldersmoke195.mp3

ND6T's Very Cool Power Meter (and drawing)

Don's drawing is so good, I just couldn't resist posting it here.  It is part of an article he did for the BITXHACKS blog describing how to add a Stockton bridge forward/reverse power meter circuit to your rig.  Check it out: 
http://bitxhacks.blogspot.com/2017/03/nd6ts-forward-and-reverse-power-meter.html 

N7SUR's Nice SSB Filter -- Nail Polish Stuff Adds Soul to the New Machine

That's a beautiful graph, don't you think?  In addition to the very pleasing results, I liked Bob's methods:  the "by hand" collection of the data points using an AD9850, a 'scope and a notepad (see below); the filing down of ceramic disc caps;  the use of nail polish hardener -- all this adds a definite artisanal element to this project and puts more soul in the new machine.

Like Bob, I too kind of bailed out on the Q calculation when I was doing this.  But as I recall there is a variation on the G3UUR method that yields this parameter too, right?

Bill:

I'm reluctant to share this with you because the results appear too
good.  I've attached a graph showing my four crystal, 11Mhz
filter measurements.  The graphed points are read values using my
AD9850 DDS VFO feeding to a TEK scope.

A TIA amp was used for input and output of the filter.  My development  software was the Steder-Hardcastle software as presented in November 2009, QEX.

I am now practiced in the black art of filing off the tops of disc
ceramic caps to "adjust" their values.  This black art also involves
the mysterious qualities of Sally Hansen Nail Hardener.

Let me share my method for developing the filter.

I've built CW filters before but this was my first effort at SSB
bandwidth which is less forgiving.

The G3UUR oscillator method (see page 3.19 in EMRFD) is a simple and
effective filter design method. but it does not provide a measure for
crystal Q, a value which impacts filter insertion loss.

So I decided to choose crystals with proven pedigree. These were 11 Mhz crystals from Mouser, part number 20-HCA1100-S.  A lot of ten costs $5.  These were the crystals selected by Jim Kortge, K8IQY, for use in his 2N2/20 rig.

For software, I use the Dishal package that can be downloaded from the ARRL and other sources.  This package was the basis for the
Steder-Hardcastle article in November 2009, QEX. The "Xtal" pull down
menu provides entries for an individual G3UUR oscillator.

Simply put, all critical filter input values are generated by reading
the change in crystal frequency as an additional capacitor is added
into the oscillator circuit.

I suggest starting with a 4 crystal filter. Only two capacitor values
were required for my filter.  Five capacitors were required--two series
and three shunt.

Start by reading the "open switch" frequency for each crystal.  Sort
the crystals into increasing frequency order and choose the four with
the most narrow frequency span.

Using the pull down menu measure the individual crystal measures for
Lm, Cm, and series frequency.  Average these across the four crystals.

The Lm or Cm and series frequency are placed into the Dishal software
main menu.  Also enter the average Cp which is the measured capacitance across the crystal leads.

Finish up the main menu entries by entering the number of crystals (4), and the desired bandwidth--generally 2.4 to 2.9 Khz.  Finally enter the acceptable ripple, which is often 0.1db.

Let the software calculate the filter values.  Expect some odd
capacitance values.  By changing the filter bandwidth--say from 2.4 Khz to 2.35 Khz I can move one of the capacitance values to a standard value.

The software also displays the input and output impedance.  If the
filter is centered between two TIA amps, this filter impedance must be
transformed to 50 ohms in the amps.  This provides the transformer
winding ratios.

The Dishal software has always given me good results.  But I haven't
compared its results to Ladpac--especially GPLA.

Bob -N7SUR