Podcasting since 2005! Listen to Latest SolderSmoke
Sunday, October 16, 2016
Colin M1BUU's New Receiver Project
Wednesday, July 4, 2012
AA1TJ -- As always, in the Vanguard
----------------------------------------------------
From AA1TJ:
Wahoo...Dale, you amazing!
You are my first QSO with the Vanguard 1 reproduction satellite beacon transmitter. My circuit is a fairly close copy of the one shown on the lower left-hand corner of the 1959 CQ Magazine article (notice the output signal pick-off shown in this schematic is incorrect, or at least incomplete). My circuit uses link-coupled output impedance matching, which is similar to the only other documentation that I was able to dig up. The attached image "Early_Microlock_Bcn.jpg" was snipped from an original NASA report on the transmitter used in early airborne and sub-orbital tests leading up to the Vanguard flights.
Yes, you heard correctly. I'm using a Philco 2N504 surface-barrier transistor, but please let me back up a bit.
Roger Easton (a native Vermonter...and still resides here!) was at the helm of the communications development for the Vanguard/Minitrack project. Of the Vanguard "grapefruit" satellite beacon transmitters, he wrote in the May 2008 issue of High Frontier magazine
"We tried subminiature tube transmitters first. They worked marginally. Finally, Bell Telephone/Western Electric developed a very nice transistor for the task, and the problem was solved."
However, that leaves out a small detail. They first tried Philco surface-barrier transistors, which worked fine on the bench, however two problems were discovered. They were found to be too temperature sensitive; the RF output power from the one-stage transmitter dropped excessively at elevated temps. Secondly, there was some issue with the packaging that produced erratic operation when the transistor was rotated positionally. The Western Electric devices proved better on both counts.
The WE transistor appears to be "unobtainium" these days. That, plus the fact that my circuit won't be flying up to space anytime soon, prompted me to settle on a Philco 2N504. Although my device was manufactured in September of 1959 (Vanguard TV-4 - re-Christened "Vanguard 1" - first orbited on March 17, 1958), the 2N504 was an off-the-shelf item on the launch-date.
The only other obvious difference is the Vanguard 1 beacon circuit operated on 108MHz, whereas mine is presently working on 14.0596MHz. I recently had it running as a beacon on 10m for 48 hours but I had no luck given present band conditions.
The receiver is a simple, 0-V-0 regenerative set using a single Raytheon QF721 (fabricated in February 1953). I heard little activity on 20m when I started up my auto-keyer this morning. I had it looping 3X1 CQs whilst I worked on another project. To make matters more difficult, the exhaust fan was running in my shop and it happened to be raining heavily when you called. Worse yet, the receiver had drifted off my calling frequency by the time you called. I barely discerned a high-pitched CW "1" or "J"...which prompted me to quickly switch off the fan and re-tune. You were subsequently a solid 579.
Of course my heart jumped when I heard you calling me...how I love that feeling! And it was a fabulous QSO so far as I'm concerned. Following our contact I opened my metal index card file box and pulled out the QSL that you sent to me following our "Code Talker" QSO. To think I now have another happy memory to add to that one! Thank you once again, Dale. It figures you'd be the one to pick-off my unannounced presence on the 20m QRP calling frequency with 25mW. Well done, OM.
Also, you might enjoy this video of the actual launch, including some interesting control room audio banter. It may be found here: http://www.nrl.navy.mil/vanguard50/index.php. The way at least one of them nervously repeats, "Keep going baby!" gives some indication of the pressure these guys were under...having failed so spectacularly on two previous occasions.
All the best,
Mike, AA1TJ
Hi Michael,That was fun!I first heard you on my SG-2020 rig, but did not have a paddle handy, so I fired up the K3. I don't ever recall having QRN on 20M, but it was bad. Without it, you were 579 and even with it, 569 towards the end of the QSO.I just happened to be QRV on 060 listening when I heard your CQ's. Not bad for a 25mW signal from (I think you said) a Philco transistor.73,Dale W4OP
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Monday, October 3, 2011
More Homebrew Tubes -- This Time from Poland
"All is needed now is to solder a socket to the base of the triode, and use it to make (for example) a regenerative radio receiver!"
Check it out: http://lekernel.net/blog/2011/09/prywatna-wytwornia-lamp-where-diy-meets-vacuum-electron-devices/Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Saturday, May 17, 2014
SolderSmoke Podcast 160: Special Four Days in May (FDIM) issue
SolderSmoke Podcast #160:
http://soldersmoke.com/soldersmoke160.mp3
Bob Crane, W8SX, was out at the Four Days in May event and did an excellent series of interviews with the guys who made presentations:
Many Ways To Homebrew
Battery Powered Software Radios:
Having your cake and eating it, too
The Classic World of the Regenerative Receiver
Why Does My Rig Have a Receive Antenna Jack ?
The Great Arduino, JT65 and Rebels Caper
High adventure with new radio paradigms
PoW QRP
-------------------------------------
VIDEOS OF THE PRESENTATIONS ARE HERE:
http://www.ustream.tv/recorded/47599691
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Saturday, August 16, 2014
SolderSmoke Podcast #164 Ancient Tribal Knowledge: Tube and Tube-like Radios
SolderSmoke Podcast #164 is available:
August 16, 2014
http://soldersmoke.com/soldersmoke164.mp3
ANCIENT TRIBAL KNOWLEDGE -- TUBE AND TUBE-LIKE RADIOS
Workbench Updates:
-- Pete's Arduino Keyer Project
-- Bill Builds (and LIKES!) a REGENERATIVE RECEIVER
-- The Joys of Regen Shortwave Listening
-- Grayson Evan's Tube (Thermatron) Book
-- Book review: "The Joy of X" (It's about math).
-- Shameless Commerce: A Plug for Bill's Book
-- Pete discusses tube projects
-- Making your own enclosures from Home Depot flashing
-- Amplitude Modulation
-- Compactrons, Nuvistors and other unusual tubes
-- BANDSWEEP: Radio Havana on Bill's new regen
Bill's Mate for the Mighty Midget Receiver
3 6U8 Tubes on a Benton Harbor Lunch Box Chassis
Nuvistor 2 meter down converter
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Saturday, September 17, 2011
Homebrew Hero: John Rollins, W1FPZ
http://youtu.be/EV9ljdHLqLg
From John's QRZ listing. This was written by Tim, W1GIG. (Thanks Tim!):
John passed away on March 18, 2008. It was 11 years ago that Bruce Kelly asked John to take over the Amateur Radio column in the OTB as Bruce himself was winding down. John was a man of many talents and had a most interesting life. Because he was always so busy helping others, he rarely took time to talk about himself, so I am going to take this opportunity to tell you a bit more about him.John was born in Guatemala of American parents where his father worked for United Fruit Company (think bananas). At an early age, his father died of malaria and his mother moved the family back to New England. He also lived with an Aunt and later with his much older brother, an airline pilot, who lived on Long Island. As a teenager John discovered radio and his brother bought him a $5.00 two tube regenerative radio kit to build. John built the kit, but it was another 6 months before he got another kit for the power supply. With the help of a ham who lived nearby, he got the radio working which opened up a whole new world for him. John was in High School when his brother went with him into NYC to test for a ham license at the FCC Field Office. For the next couple of years he was active on 40 M. CW using the regen receiver and a Hartley oscillator.
At this point, WW II got in the way. John enlisted in the Army and was trained in radio repair, shipped off to New Guinea, and assigned to be a telephone lineman. The Army moved John steadily North to the Philippines and then to Japan where he was finally sent back to the States for discharge. John enrolled at the University of New Hampshire where he discovered his love of geology. He liked it so much he went on to get a Masters at the University of Nebraska and several years later, a Doctorate also from the University of Nebraska. He continued to work for Chevron exploring for oil in Africa, Madagascar, Spain, Denmark and many other countries including the US.
While he was in college, John remembered his love of radio, but unfortunately his ham license had expired, so he went back in 1954 to test again receiving the call W1FPZ which he held ever since. Later, he tested for his ham license in Madagascar (in French) and in Uruguay (in Spanish). Not many of us have tested for our licenses in three languages! While he was in Madagascar he built many of the transmitters that are still in use at his home. He even wound his own power and filament transformers to get the voltages he wanted.
John also discovered that he was an excellent pistol marksman, but that his results could be substantially improved by reworking the guns themselves, so he taught himself to be a gunsmith. His skills at woodworking, carving, machining, precision casting of bullets and loading target shells were such that this became a major hobby business for him which he pursued right up to recent months.
John was a survivor. While in the Army he survived a major brush with a 3,300 volt power line and later a plane crash while in Africa. Since small planes were the only way for John to get to his job sites, he decided that he’d rather trust his own skills as a pilot than rely on the brush pilots that the oil company had hired. Back in the States, recuperating from his injuries, he got a private pilot’s license, then went on to a multi-engine commercial license with full instrument ratings. Just before he retired, he was working out of Denver and flying his own twin engine Queen Air to Maine to work on his retirement home. He even flew from Maine to the AWA conference one year picking up Marshall Etter, W2ER from Long Island on the way.
Preparing for retirement, John and his wife Liz doubled the size of their new home in Maine. As part of the project, John wanted reliable ham communications with his friends around the world. Limited by normal power regulations, he decided to build a BIG antenna. His final choice was a horizontal V beam aimed at the Southeast. The beam legs were 1,100 feet long and supported on three 100 foot towers. Looking for wire strong enough to span the distance he ran across an ad for #6 phosphor bronze wire run by Marshall, W2ER who had salvaged the wire when he was closing the RCA site at Rocky Point. The two men became fast friends and co-conspirators. Marshall provided quality parts left over from RCA and John, using his metal and woodworking skills, customized the parts to suit his projects. The result was a long series of radio projects that he gave to friends with the caveat that they were required to use them on the air in AWA events.
John always had a fascination with the products of Jerry Gross of NYC. He built a Gross replica transmitter for Marshall who used it for many years. Parker Heinemann, W1YG found an original Gross and had John restore it along with the receiver, station monitor and antenna tuner. They set up an entry in the 1991 AWA contest that exactly duplicated a Gross add from the 30’s and took first place. After the conference, John got a call from Bill Orr who offered John his Gross if John would restore it. That transmitter is part of John’s home station.
Not satisfied with the Hartley oscillator, John discovered that if he used the Colpitts circuit with a split stator condenser and grounded rotor, he could eliminate the hand capacity effect. One of his last projects was to set up the tuned circuit for me and share several of his other construction secrets. The circuit is rock stable on 40 meters.
Thanks for the opportunity to fill you in on some of the less well known aspects of John’s life. It was an honor to know him and he will be missed by all.
Saturday, August 2, 2014
Video: Regenerative Receiver Project!!!
Pete Juliano and Grayson Evans are luring me back into the world of tubes and (gasp!) regen receivers.
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Thursday, November 11, 2021
Scott WA9WFA's Beautiful HBR-13 Receiver (3 videos)
This is Scott WA9WFA's first homebrew construction project. He did an amazing job on a very complex project: a 13 tube superhet receiver. It features plug-in coils for multi-band coverage, dual conversion with IFs at 1600 kHz and 100 kHz, and several regenerative stages. Scott's construction is top notch. He tells us that he had been working on this receiver for several years, so long in fact that some of his friends began to wonder if it really existed. Well wonder no more. Retirement has provided Scott with the time to finish this project.
Monday, July 7, 2014
Jason's WBR Regenerative Receiver
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Sunday, November 14, 2010
W4HBK's QRSS Grabber: The Amazing Pensacola Snapper
Now that we are back in the States, W4HBK's grabber is playing a similar role for me. His grabber consistently seems to pull in more sigs than most of the other North American grabbers. The above image is a sample of what you will see when you visit his grabber web page. (I'm also a big fan of the W1BW and VE1VDM grabbers -- thanks guys!)
My signal is the "shark-fin" pattern just a little below the middle of the screen. That's 20 mw to a 50 foot piece of AC line cord about 12 feet off the ground. And it is making the trip from Northern Virginia to Pensacola Florida very consistently. Thanks Bill!
Try taking a look at the Pensacola Snapper and see if you can spot my QRSS signal. My frequency varies from day-to-day (sometimes intentionally!). And lately Bill has occasionally been parking his receiver on 40 meters :-( But most days you will be able to see his 30 meter screen, with my shark fins menacing Pensacola. Please let me know if you see me.
Here is OM HBK and his bio:
Born: 1939, Pensacola, Florida
I was first licensed in 1954 as WN4HBK and upgraded to General in 1955 acquiring the call sign I've used to this day. My dad is responsible for my favorite suffix moniker. the Hot Biscuit Kid. I could really put away my mom's scratch biscuits!
My first station I built myself and consisted of super regenerative RX and a 6L6 TX.from designs in the ARRL Handbook. My dad was a radio mechanic for the Navy and taught me how to read schematics and solder. Later stations consisted of Hallicrafters S-38C, National NC-98, HRO-5 recievers and several Heathkit and Globe Scout transmitters. Boy, those were the days!!
After high school I entered college intending to become an antenna engineer but eventually gravitated towards a degree in Physics. This was pretty cool because it led to a career with NASA where I worked on the Mercury, Gemini, Apollo and Space Shuttle projectsall thanks to my early interest in radio.
Today I'm fully retired and living in Gulf Breeze, FL. just across Pensacola Bay from my hometown. My XYL (Anna) and I enjoy the local beaches in a variety of wayssurf fishing, beachcombing, hiking, painting (her) and photography (me). We are also enjoy gardening and winemaking.
My Amateur Radio interests are CW, DX, contests, antennas and digital modes.
Presently I am experimenting with QRSS and have a 250 milliwatt MEPT station on 10.140 MHzsend me an email if you copy my signal. I now have a grabber to present a spectral display of QRSS activity for other Hams worldwide to watch for their signals http://www.qsl.net/w4hbk/w4hbkgrabber.html
Thursday, February 18, 2010
HOMEBREW HERO: Arnie Coro, CO2KK
Below you can find the transcript of Arnie's latest edition of Radio Habana Cuba's "DXers Unlimited." There is a good discussion of current solar conditions (improving!) and of Arnie's 40 meter CW initiative.
Arnie's work at RHC is archived and available on the net. It is a real Caribbean treasure trove for us: http://www.dxers-unlimited.dxer.info/
Here is Arnie's blog: http://dxersunlimited.blogspot.com/
From "DXers Unlimited" 16-17 Feb 2010:
Hi amigos radioaficionados around the world now enjoying the ongoing
upsurge in solar activity that has brought to us DX signals as
strong as we had not heard them since 2005 !!! Yes my friends,
finally, after waiting, and waiting, and waiting, we are seeing a
nice comeback of the sunspots... As a matter of fact, only two days
of 2010 had gone by with a totally blank Sun. The all important R
number from the very much respected Catania, Sicily reference solar
observatory was 39 yesterday... and two other sunspot groups are
just about to turn into view...
As a result of the sustained increase in sunspot count, we are
seeing the 15 meters or 21 megaHertz amateur band opening up every
day... I will tell you more about amateur radio Dxing later , here
at th emid week edition of Dxers Unlimited... The daily solar flux
is very near 90, and forecasters were looking at a lower flux during
the next three days, but this may change dramatically and in just a
few hours, if the new solar sunspots regions that are rotating into
Earth's view show high activity.
Item two: The amateur radio hobby is alive and in good health... ham
radio operators are enjoying the hobby and finding new ways of
improving their communications skills... Here is a recent example,
by carefully studying the behavior of activity on the 40 meters
band, I was able to find out that the band
segment from 7105 to 7125 kiloHertz was seeing very little use here
in ITU Region II, that is the Americas. So I launched the idea to
start using that segment by low power stations, on several of the
popular ham radio Internet mailing lists. In just a couple days , CW
activity , mostly by low power or qRP stations on that segment
roughly 20 kiloHertz segment has increased dramatically... For many
operators, finding such a nice and clear , interference free
segment, has meant having the opportunity of making many more two
way contacts.... and not only exchanging reports, but also , thanks
to less interference, we have carried out some really nice ragchews,
and just notice that I have just said WE, because I am , of course,
one of the happy radio amateurs operating on CW between 7105 and
7125 kiloHertz.
There are no digital stations using that segment... as they are now
present between 7030 and 7040 kiloHertz, the two frequencies were
QRP , or low power operators, are used to gather, and where for the
past year or so, it has become extremely difficult at times to make
even a single two way CW contact.
I am not saying that QRP operators should abandon the two favorite
watering holes, 7030 and 7040, what I have told the QRP , GLOWBUGS
and Regenerative receivers Internet list members, is that the
segment between 7105 and 7125 is in a much better shape regarding
QRM... yes there is a let less interference from other
communications modes...so chances to make nice contacts increase in
a very significant way.
Si amigos , Yes my friends , Oui mes amis...amateur radio operators
around the world are now enjoying the upsurge in solar activity, and
with it, we all must look around the bands and find ways to make
better use of them... After all, many other users of the radio
spectrum are always monitoring the ham bands, just to have data
available to substantiate their requests for more spectrum space....
In other words, if we, amateur radio operators are able to be more
time on the air, and the bands sound like a beehive of activity,
chances that those spectrum hungry users will just go elsewhere !!!
The complete script of the program , devoted to the promotion and
development of our radio hobby in general and amateur radio in
particular, can be read at:
http://dxersunlimited.blogspot.com
later this Tuesday, after the program goes on the air
Comments , suggestions and ideas on how to help promote
amateur radio are welcome at my e-mail address
inforhc at enet dot cu
72 and DX
Arnie Coro
CO2KK
Tuesday, October 11, 2011
Comet Hits Sun, SFI up, Report from San Vito
The SOHO spacecraft caught some great images of a comet crashing into the sun. The YouTube clip above is from July. Here is NASA video of one that took place just last week:
http://www.nasa.gov/mission_pages/sunearth/news/comet-cme.html
Coincidentally I'm sure, the solar flux has increased significantly and the upper HF bands are working again. My 17 meter rigs still need final amps -- I am ordering parts for Farhan's JBOT circuit. (I plan to build three or four.) But because I had the 2B on 15 meters for the Sputnik event (still no Sputniks heard here) I noticed that DX was coming on that band. Using my HT-37 and a 40 meter dipole I easily worked several Europeans on 15 meter SSB. Especially nice was a long rag chew (using my rusty Italian) with Gianfranco, IZ4NPE, in beautiful Ferrara, Italy (a bicycle city).
Somehow tying this all together, I got an e-mail from Walter in San Vito, Puglia (the heel on Italy's boot). Walter has one of those "dream jobs" for a radio amateur: He tracks sunspots!
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20
Friday, September 3, 2021
1BCG -- 1921 Transatlantic Test and the Upcoming 100th Anniversary
On December 11, 2021 the American Radio Relay League, The Radio Club of America and the Antique Wireless Association will recreate these historic transmissions on 160 meters near the same location that was used in 1921, using a replica transmitter constructed by volunteers at the Antique Wireless Association. This special event is your opportunity to relive a historic moment in amateur radio history.
The operating schedule and frequency for the 1BCG Transatlantic Tests Special Event has not been established.
Additional details will be posted here when they are available.
Sunday, April 23, 2023
Helge LA6NCA's Altoids Tin Receiver
Monday, March 17, 2014
The Ladybird TRF (Regen!) Receiver
http://www.mds975.co.uk/Content/trfradios02.html
My feelings about regenerative receivers and their possible connections to the nether-world are well known. But the receiver described on this beautiful British web site is almost enough to make me change my mind. Thanks to Stephen, G7VFY, for alerting me to this (and to so many other great sites!) I also find myself forced to give regens another chance because George Dobbs, G3RJV, was the original source of this design. It comes from a book he wrote in 1972. I love the wooden bread-board construction. Thanks Stephen! Thanks George!
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Saturday, January 17, 2015
Colin Finishes His BITX
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Tuesday, September 9, 2014
"Off the Shelf" Regenerative Receiver
I call it the "Off the Shelf" Regen because the base on which it is built is scrap lumber from a recent shelf building project. Also, all the parts came out of the junk box.
6-10 MHz, AM, CW, SSB, Data. 4 transistors, no chips.
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20
Friday, October 6, 2017
VE3BOF's Regens and DC Receivers
VE3BOF BENCH |
Friday, October 5, 2012
Sputnik Party 2012 Soapbox
3 October from AA1TJ:
Here's an admittedly late reminder that the Sputnik Party begins
tomorrow (4 October). I've been preoccupied with non-hobby concerns in
recent months but I did manage to throw something together for the
event.
My transmitter follows the lines of the 10mW, battery-powered, RF
beacon that was carried into orbit in 1958 by "Vanguard 1." You may
recall this is the one Premier Nikita Khrushchev characterized as "the
grapefruit satellite."
My present build uses essentially the same circuitry and componentry
as did an earlier, 20m version; details of which can be found at
http://aa1tj.blogspot.com/2012/06/vanguard-1-satellite-transmitter.html
The 15m version drives a 44m end-fed wire with 30milliWatts.
The receiver that I built for the event is essentially a "Q-multiplier
-> detector" type regenerative job. However, the Q-multiplication is
accomplished by a parametric amplification using a quartz-crystal
controlled pump. I thought it would be historically appropriate given
that parametric amplifiers were all the rage in the late 1950's.
I put together the keying and R/T changeover circuitry this morning.
When it appeared that "all systems were go" I began sending CQs on
21.060MHz. The band, or at least that portion of the band (the
receiver only tunes from 21.060 to 21.064MHz), seemed rather quiet,
but my 6th call netted a "dit dit dah dah dit dit." Resending my call,
I was very pleased to hear HB9DCL come back to me from just outside of
Zurich. The reports were 579/339. Frank was running 5W to a log
periodic antenna. I sure hope this is a sign of things to come!
I hope to be at the key by 1300Z tomorrow. Although my little
"grapefruit" only puts out 30mW, folks running "Sputniks" made from
ex-Soviet subminiature "rod tubes" should be at least two S-units
stronger. A number of European stations will be operating this year
and at least one station that I know of will be QRV from Japan. Just
listen for the beeps and give them a call!
Thank you,
Mike, AA1TJ
.......................
letter to some of the guys
Dear Friends
I won't forget this morning's QSO with ON6WJ anytime soon! As he
beeped/called CQ I could hear him riding on waves of QSB. I kept
hoping he would end on the top of the wave. It happened one time and
Jos sent "AA1TJ?" but by the time I re-sent my call we were back in
the trough of the wave. He started calling again and once again I
crossed my fingers. Finally it happened, he ended on top of a
particularly strong peak...and sure enough, he copied my callsign. It
took more effort to exchange the reports but we eventually did it! He
confirmed my 559 and I did the same for my 339 report. It must be true
that anything worthwhile doesn't come easy, because the more difficult
the QSO the more I seem to enjoy it! I copied Jos' info: "SPUTNIK PWR
700mW = ANT 3EL YAGI" perfectly on my tiny receiver. Just as amazing,
he copied my 30mW transmitter made from one PNP Germanium transistor
dating from September of 1959. Needless to say, I'm a happy camper
today. Merci Beaucoup, Jos.
Just above my operating frequency I heard PA0PJE sending "CQ Sputnik."
You had a beautiful signal here, PJ! It was easily S6 on the peaks. My
transmitter frequency trimmer adjustment is buried in a rat's nest of
wires which I didn't dare stick my hand in so early in the day.
However, if I hear you again I will definitely risk it.
Thanks Carlo/IZ4KBS and congratulations on your Russian QSO. Any
contact all with this simple stuff is reason for a celebration!
...and now back to the Hobbit Hole for another dose of QRPp.
73/72,
Mike, AA1TJ
Our book: "SolderSmoke -- Global Adventures in Wireless Electronics" http://soldersmoke.com/book.htm Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke Our Book Store: http://astore.amazon.com/contracross-20