Australia and Apollo 11 -- Honeysuckle Creek

Trevor reminded me that Parkes ("The Dish") was not the only Australian antenna at work during Apollo 11.  This very nice video gives a more complete description of what happened.  

I saw one piece of Collins gear.  And some of Curious Marc's HP frequency counters.  

More on the Honeysuckle Creek Tracking Station here: https://honeysucklecreek.net/

The Carrington Event and the Current Solar Cycle (Solar Max "Sooner and Stronger")

 

From the article: 

"Sunspot activity has increased dramatically in early 2023, with sunspot numbers far exceeding NASA's predictions each month — though nothing as big as Carrington’s sunspots have been seen yet. Still, the profusion of sunspots and other solar weather suggests that the next solar maximum will arrive sooner and stronger than NASA previously predicted. Whether the incoming maximum brings with it a Carrington-level storm is a matter of pure chance — but scientists will keep watching for spotty signs on the sun, just in case."

https://www.yahoo.com/lifestyle/see-monster-sunspot-launched-carrington-120000667.html

Part III: Curious Marc Repairs an All-Discrete Freq Counter: DO NOT ATTEMPT REPAIR OF CAVITY RESONATOR

I love all the "DO NOT ATTEMPT" warnings.  Wow, even HP got so skittish about this stuff.  Marc has a great sense of humor and notes that, "no cavity resonators were harmed in the production of this video."   I like the description of the mixers and the photo of the mixer antennas. 

Another Podcast -- "Lamp Talk"

 

This is a blast (!) from the past.   A SolderSmoke listener sent this to us in 2006.   

So hey,  be careful with the high voltage!  

Another Model Rocket that Lands like SpaceX -- With a Great Description of the Flight Computer, Software, and Design

Wow, I have to give the devil his due:  this is NOT something that could be accomplished with my beloved discrete (not discreet!) transistors. 

As someone who spent a lot of time as a kid shooting Estes model rockets into the sky, this project really caught my attention.   (My simple rockets used parachutes, "streamers,"  or nothing at all to land.)  This guy uses onboard computers, software, and retractable landing gear.  Very cool.  

Thanks to Jenny List and Hack-A-Day for alerting us to this.  

Part 2: CuriousMarc Fixes an All-Discrete Counter -- "Like an IC, but in discrete form."

Marc nicely sums up this project with this line:  "It's an IC but in discrete form!"  On the same theme, he later says, "Who needs a logic analyzer when you can do a visual debug with neon bulbs?" 

Very cool.  Lots of troubleshooting and repair lessons in this video: 

-- Again we see the benefits of paper manuals.  (Todd K7TFC commented astutely on this under yesterday's post.)

-- 2N2222s to the rescue.  

-- A surprisingly large number of bad transistors (6?) found.  Why did they go bad? 

-- Marc repeatedly says, "Let me poke around."  Poking around is often important.  Mark fixes the reset line after poking around.  He is not sure HOW he has fixed it, but he has... by poking around.  Sometimes this happens.  Thank God for small favors. 

-- Marc has some fancy HP board extenders.  I am jealous.  

-- He also has a cool de-soldering tool.  More jealousy.  Want one. 

-- Marc's understanding of how the HP engineers had to put one of the flip-flops "on the edge of stability," and how his 'scope probe was capable of disturbing this stability. 

-- Remember that those Nixies are TUBES with enough voltage on them to really zap you.  So be careful in there.  This is an especially dangerous mix of transistor tech and tube tech.  With transistors you can work on them with the rig fired up.  With tubes, well, you have to be careful.

Part III tomorrow. 

CuriousMarc Repairs an old DISCRETE COMPONENT HP Frequency Counter

I really liked this repair video from CuriousMarc (aka AJ6JV).  This counter pre-dates the use of integrated circuits -- it is all discrete transistors.  Near the end, Marc mentions how this made this repair "like debugging a big integrated circuit, but with access to each transistor -- this made it quite satisfying."  I hear ya Marc -- with big ICs maybe all you would get to do would be to swap out a single IC.  There would not be much of a challenge there.  

With the older, discrete circuitry you get a good view of how Marc troubleshoots -- how he finds the precise points where the device is failing.  Note his use of the old HP paper manuals. I know this is an old guy thing, but I think the paper manuals (as opposed to the online versions)  just make the process easier.  Note too that Marc at one point had to go back to microfiche. 

The transistor tester Mark used was very cool. 

The whole physical structure of the HP device is very similar to my NYC HP8640B.  Thanks again Steve Silverman and Dave Bamford. 

I will look at Parts II and III of this series soon.  

Sam WN5C Builds a Michigan Mighty Mite and Takes it to Lake Thunderbird

 

Sam WN5C built a Michigan Mighty Mite and then went the extra mile by putting it on the air from a field location.  And what a great name this location has for a QRP operation:  Lake Thunderbird. 

Sam wrote up his experiences for K4SWL's QRPer blog: 

https://qrper.com/2023/05/guest-post-lake-thunderbird-k-2792-with-a-homebrew-transmitter/  

Below is a picture of the rig.  NOTE THE LOW-PASS FILTER.  FB OM. We wouldn't want that rig tearing up the electromagnetic spectrum. 

Looking ahead, Sam writes: 

Next step is a DC receiver (maybe the high school receiver?) and then a more substantial transmitter married together, I think. This is all incredibly fun.

Thanks Sam! 

Nine Homebrew Transceivers by Walter KA4KXX (and some QRP and QRO RC planes)

 

Our friend Walter KA4KXX in Orlando recently sent us this really cool "family photo" of his homebrew rigs.  Be sure to see the key that explains the photo (below) FB Walter.  Thanks too for the model airplane pictures. (Click on the images for better viewing.) 

Walter wrote: 

I recently realized that I am now operating nine homebrew transceivers, which would fit nicely in an “aerial” photograph, so I grabbed my stepladder and everything did fit well in the frame.  Six of them come from the BITX side of the family, with #1 and #7 direct conversion and #9 a single conversion superhet but using the NE602.  More basic information is included in the sketch.

I tried a Si5351 VFO once in the dual-band rig #4, but by the time I built the QRP Labs kit with so much closely-spaced soldering, and then added sufficient filtering and amplification to properly drive a 50 ohm load, I was exhausted!

These nine were created during the past eight years, and were preceded by eight more transceivers that I can document, but those have all been disassembled, with many of the parts being used in these later rigs.  I build my transceivers to be operated often, and since 20 Meters has been hot lately, for example, my POTA Hunter log shows over 300 CW and SSB contacts in 2023 alone, so rig numbers 7 - 9 have been earning their keep lately.

In summary I have created a lifetime total of seventeen transceivers so far, and although I am nowhere near the fifty-plus tally of Pete N6QW, I did spend a lot of years instead homebrewing many radio-controlled model airplanes of my own design.  Two photos show one example that I flew in the 2011 Blue Max Scale R/C Contest at the Fantasy of Flight Museum in Polk City, Florida against some stiff QRO competition.

—Walter KA4KXX

How they Make Raspberry Pi 4 Single Board Computers

So, if the Raspberry Pi is a key part of your new "homebrew" rig, how much of the rig did YOU actually build? 

Germany: Direct Conversion Receiver Success!

Dear Bill,

Please my apologies for my late update on our DCR project. We started with the course in the semester break and once the semester started only a handful of students were able to finish their receiver. A long shelf of shame .... 

Here is what we've got so far (those were finished at the end of April already). 3 nice DCRs completely sufficient to copy CW indoors without additional antennas starting from late afternoon. Strong stations can be heard all day. I found that coupling some 6m of wire with one or two windings to the ferrite core can boost the signal dramatically but can also increase noise. 

The PTO is based on your design (Bill Meara N26QR &  Dean KK4DAS) which was sparked by Farhan  (VU2ESE) , except that I've swapped the FET for a NPN. The input amplifier and antenna is from the JUMA active ferrite antenna by Matti Hohtola (OH7SV), the band pass filter is from Hans Summers (G0UPL), the mixer and the headphone amplifier is inspired by Pete Juliano (N6QW), you told me that the diplexer (as well as the whole DCR idea) is attributed to Wes Hayward (W7ZOI) and the perfect schematics of Rick Scott (N3FJZ) where crucial to get me started in the first place. I enjoy keeping track of original sources, as I would do in science. This shows that even little achievements are based on the ideas of many other great people -  and this is nothing to be ashamed of. 

This was a lot of fun! Thank You!

Best and yours sincerely,

Andreas

Wow, the direct conversion re-engineering of education continues, this time at graduate-school level with biologists in Munich!  Amazing.  

Andreas points out that his group was also plagued by semester-related problems that caused many additions to the German shelf of shame.  Let's hope that someday soon these builders will come to their senses and join the ranks of those who have finished their homebrew projects.  

Looking at the schematic (below) of Andreas's project, there are a couple of significant differences from ours:   

-- Their AF amp used a transformer-less push-pull design.  We had considered this but abandoned it thinking that it would be too complicated to explain the workings of this circuit to our students.

-- Most significant, is Andreas's use of a ferrite rod antenna and an RF amplifier.   I think a simple 33 foot quarter wave antenna (with a ground or a counterpoise) might work better.  But hey,  to  each his own!   The important thing is that a number of these receivers were successfully built.  They look beautiful.  

Congratulations to Andreas and the successful Munich homebrewers!  

 

Canadian Build of the Direct Conversion Receiver -- Do This in Your Town! (Video)

This is so cool.  We have been getting reports from Daniel VE5DLD up in Regina, Saskatchewan, Canada.  Daniel is a teacher and he has been building the receiver with a group of students.  

They have been doing very well.  They may end up having more success than we have had here.  

This morning Daniel fired up his build of the receiver and it was inhaling 40 meter signals.  You can hear the CW and the FT8 and you can also hear shortwave broadcast signals just above the 40 meter frequencies.  Congratulations to Daniel!  He is now one of very few radio amateurs who has homebrewed a receiver.  I think his students will soon do the same.  

Daniel's students have built several of the boards and appear to be on the brink of full success.  

Their PTOs look very nice. 

The AF amps were the most challenging of the boards.  Theirs look great.  Excellent soldering. 

We want the receiver project that we carried out at our local high school to serve has a model for others.  After all, we got our inspiration from Farhan in Hyderabad.  We want to see this kind of homebrewing continue.  All of the information on this receiver is on our Hack-A-Day.io page: 

https://hackaday.io/project/190327-high-schoolers-build-a-radio-receiver

We strongly encourage others around the world to find ways to use this project to teach analog electronics.   We think the circuit strikes the right balance between simplicity and usefulness -- when they are done, the students will have a useful receiver capable of worldwide reception.  

Please let us know if you are building this receiver; we are especially interested in the use of this receiver in student-focused group-build projects.