30% off on SolderSmoke, The Book. Cyber-Monday Sale. November 28

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"
http://soldersmoke.com/book.htm
Our coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmoke
Our Book Store: http://astore.amazon.com/contracross-20

A Re-balanced Modulator for my Re-cycled Rig

My effort to bring my Azorean 17 meter DSB rig back to life continues. This is proving to be harder than I thought. I'm still taming my version the JBOT amp. It still seems to break into oscillation -- I think the oscillation freq is around 1 MHz. But I am making progress.

I had to go back and work on the balance modulator circuit. I really like the simple two diode singly balanced mixer circuit. But my original Azorean board had, like the oscillator board, been through a few too many rounds of modification and repair. I decided to start over. See above. I even came up with my own little innovation on this circuit. Doug DeMaw's original design called for a 100 ohm pot at the junction of the two diodes, with the signal coming off the tap. You adjust the pot to balance the circuit and null out the carrier. But I didn't have a 100 ohm pot. Lots of 1K controls were available, so I put in two 50 ohm resistors in place of the pot, then put the 1k pot between the diodes, with the tap to ground. This balances things out nicely. See below.

I hope to get a podcast out next week, but I've been suffering from a nasty headcold that would have introduced all kinds of weird audio effects.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

The Bar of King Arduino

I'm not sure what I would do with an Arduino, but articles like this definitely make me want one! Here's one passage:

To make the board, the group had a specific, student-friendly price as their goal: $30. "It had to be the equivalent of going out to dinner at a pizza place," Banzi says. They also wanted to make it quirky, something that would stand out and be cool-looking to erudite geeks. If other boards were often green, they’d make theirs blue; while some manufacturers economized on input and output pins, they’d add plenty to their board. As a final touch, they added a little map of Italy on the back of the board. "A lot of the design choices are weird for a real engineer," Banzi says with a knowing laugh, "but I’m not a real engineer, so I did it in a silly way!"

Here's the article. Note the origin of the name of the device.

http://spectrum.ieee.org/geek-life/hands-on/the-making-of-arduino/0

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Steve Smith (on the left) and Bill (with the filter)

Steve "Snort Rosin" Smith has been keeping me on the side of the angels (and the FCC regs) in the area of harmonic filtering. Today he sent me this Steve and Bill cartoon. Thanks Steve. Just what I needed as I prepare for my next attempt to get my JBOT (with filter!) to behave. Wish me luck!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Amplifier Woes -- Help me! Help me!

When I look in the mirror and I see a haunted, obsessed look in my eyes. My wife senses that there is something wrong in the ham shack. She is right. I have an amplifier that wants to be an oscillator. Help me exorcise these gremlins! Guys, this problem is holding up the production of the next SolderSmoke podcast.

My JBOT amp works fine into a dummy load, but when I connect it to an antenna, it gets unstable. Here are some more details of the symptoms:

I am running the JBOT with a 5 element (two toroids, 3 caps) low pass filter (designed by Doug DeMaw and approved by Steve Smith).

With the antenna connected, all is well UNTIL I raise the power out (by varying the input) beyond about 1 watt. Below one watt, the amp is working fine, and it stable. As soon as I hit the 1 watt point, the amplifier seems to break into oscillation. This does not happen into the dummy load.

The antenna is a simple dipole fed by coax. It shows a low SWR. Even when I put an antenna tuner between the amp and the antenna and bring the SWR down to negligible levels, the instability problem persists.

With the amp disconnected from all other circuitry other than the antenna and the power supply, if I just touch the input capacitor, it breaks into oscillation. This does not happen when the amp is working into the dummy load.

I've bolstered the power supply filtering and decoupling. No luck. I tried some de-Qing of the transformers. No luck.

Any suggestions?

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Backyard Solar Astronomy

Over the weekend I took a break from JBOT amplifiers and did something I've been meaning to do for a long time: solar astronomy. I pulled out my old 4.5 inch Tasco reflector telescope and aimed it at old sol. I know, I know, this can be dangerous, but we were careful -- note that Billy is standing on the other side of the business end of the telescope. In his hands is the paper onto which we projected the solar image. I'd always wondered how I would get the sun into the telescope's field of view without risking my eyesight by using the finder scope. This turned out to be no trouble at all: I just looked at the shadow cast by the tube of the telescope and --using the shadow as my guide -- moved the tube until it was lined up with the sun. We snapped a picture of our results. I think our crude effort compared very favorably with the picture from NASA's Solar Dynamics Observatory. You can see the same sunspots in each image (ours is reversed because we were using a reflector). These images are from 12 November 2011.

Our picture

NASA's picture

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

"The Knack" on a Mysterious Island

Paul, W2IOG, sent a nice e-mail about a very early use of the term "The Knack": 1874 by Jules Verne. (What word did he use in French?). I took a look at the Wikipedia page and discovered that there was indeed quite a bit of "The Knack" on Lincoln Island:

"With the knowledge of the brilliant engineer Smith, the five are able to sustain themselves on the island, producing fire, pottery, bricks, nitroglycerin, iron, a simple electric telegraph, a home on a stony cliffside called "Granite House", and even a seaworthy ship. They also manage to figure out their geographical location."

Hello Bill,

I have been a listener to your Soldersmoke pod-casts for a couple of years now. I am also a regular reader of the blog as well as a long time victim of "The Knack". I was browsing an old book store the other day when I came across a beautifully illustrated copy of Jules Verne's book "The Mysterious Island" copyright 1920. I couldn't resist, and when I reached chapter nine of part one of the book I was really glad I had made the purchase. In the story, which takes place in 1853, castaways on an apparently uninhabited island are trying to make fire for the first time. After trying and failing to make sparks by striking stones together, two of the castaways try the following:

"Pencroft, although he had no confidence in the proceeding, then tried rubbing two pieces of dry wood together, as [primitive people] do. Certainly, the movements which he and Neb gave themselves, if they had been transformed into heat, according to the new theory, would have been enough to heat the boiler of a steamer! It came to nothing. The bits of wood became hot, to be sure, but much less so than the operators themselves.

After working an hour, Pencroft, who was in a complete state of perspiration, threw down the pieces of wood in disgust. 'I can never be made to believe that [primitive people] light their fires in this way, let them say what they will,' he exclaimed. 'I could sooner light my arms by rubbing them against each other!'

The sailor was wrong to despise the proceeding. [Primitive people] often kindle wood by means of rapid rubbing. But every sort of wood does not answer for the purpose, and besides, there is 'the knack,' following the usual expression, and it is probable that Pencroft had not 'the knack.' "

Congratulations on getting that 17 meter rig back on the air!

Paul W2IOG


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Sunspots! QRP DSB contacts on 17 meters

You can see here why I had so much fun in the summer of 2001 with my Azorean Homebrew QRP DSB rig. And why I am now re-CYCLING (get it?) and refurbishing the 17 meter gear that I built last cycle.

I've had the DSB rig on the air yesterday and have worked seven stations (2 watts peak DSB to a dipole).

Back to the Future! Someone on QRP-L said the SFI was recently at 180! Go Sol!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

JBOT Amplifier Installed in Azorean DSB Rig

I've been remiss in posting to the blog, but I have a good excuse: I've been melting solder. I have working on the installation of my new Farhan-designed JBOT amplifier in my old Azorean DSB transceiver. I'm really enjoying this project, and I now see it as the first in a series. My shack has a number of creations that were built during the peak years of the last solar cycle, but have since fallen into disuse. Many of them were partially cannibalized -- usually it was the RF amplifier that was taken out. The JBOT was just what I needed. I plan to refurbish all of these rigs, adding a bit of India to each one of them. This is very much in keeping with our "International Brotherhood of Electronic Wizards" ethos.

The installation went fairly well, but with all of the ups and downs that accompany this kind of project. The amp worked fine on the bench, fed with a signal generator and into a dummy load. But of course, life got more complicated when I installed it in the rig. Yes, it took off on me. This was no fault of the amplifier -- I just needed to add some additional shielding. It is working fine now. See above. I moved it out of center stage and put it off in the corner to avoid feedback problems. More discussion of this in the next podcast (maybe this weekend).

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Tony Sale and the Re-Building of Colossus

Steve "Snort Rosin" Smith sent us this, noting that "Tony Sale definitely had The Knack." As the Brits would say, "indeed."

http://mathdl.maa.org/mathDL/?pa=mathNews&sa=view&newsId=1195

Amazing info on Tony Sale's work here:
http://www.codesandciphers.org.uk/lorenz/index.htm

I got a kick out of this bit:

One reason for wanting to get Colossus working in 1996 was that for far too long the Americans have got away with the myth that the ENIAC was the first large-scale electronic digital calculator in the world. It was not, but they got away with it because Colossus was kept secret until the 1970s. As 1996 was the 50th anniversary o the switch-on of ENIAC I made sure that Colossus was rebuilt and working in Bletchley Park, just as it was in 1944.

There has been a stunned silence from across the water!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

21st Century Ham Radio -- EDN Article

A few listeners sent this in. Thanks! Note the mention of AA1TJ's CFL light bulb rig!

http://www.edn.com/article/519742-Ham_radio_in_the_21st_century.php


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

First Flight in Electric Multi-copter

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Recreational Engineering

I like that term! "Amateur Engineering" always seemed to sound kind of scary, conjuring up images of bridges that don't quite stay in place. "Recreational Engineering" has a nicer, less ominous ring to it. I found this phrase at the end of this newspaper article on the Maker movement:

http://www.csmonitor.com/Innovation/Tech/2011/1101/Maker-Faire-Mad-science-for-the-masses/%28page%29/2


Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Happy Birthday Arecibo! A Tour of the Radio Telescope

Yesterday I was listening (as I do each morning at 0635) to Garrison Keillor's "Writer's Almanac." (I use a beautiful old FM broadcast receiver that Rogier out in California sent me for my birthday.) Garrison announced that it was the birthday of the Arecibo radio telescope (it opened on November 1, 1963). I wanted to post something about this on the blog, but was running a bit late and didn't get to it. This morning I was greeted by an e-mail from Ken, KG6PO, alerting me to a really magnificent video tour of the Arecibo facility. Wow. This is truly amazing. You guys are going to love this one. Three cheers for Bob Zimmerman! As I watched, I got the distinct feeling that we were visiting Bob's shack, and that the dish was his antenna!

Please spread the word about this video -- it is a real shame that it has only received 757 views. Three cheers for the guys who filmed this. Beautiful work.

Links:

http://youtu.be/kQJawfbjpxw

http://www.youtube.com/watch?v=kQJawfbjpxw

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Pumpkin Pi and JBOT Gremlins

Maria wanted to go with a mathematical theme for this year's Jack-0-Lantern. Pumpkin Pi!

I have been chasing some gremlins and banshees around my old Azores 17 meter DSB rig. The JBOT Amp worked fine into a dummy load, but of course things got a bit more complicated when I put it into the rig and connected it to an antenna. It would take off (like a banshee!) if the load was at all reactive. I think this is the result of inadequate shielding and inputs a bit too close to outputs. But it all settles down nicely when I put a transmatch in the antenna line and tune out the reactance. I may just leave it this way.

Output is a bit low -- only about 1 Watt. I realize that at 18 MHz output should be dropping a bit, but I think I should be getting more. I THINK I'm giving it the recommended 1 milliwatt input. At some point I think Farhan mentioned the possible need to experiment with the number of turns on the secondary of the output transformer....

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Snow Static

Related to our post about my new (old!) all-boatanchors heating system (see below), yesterday I had some really horrendous static. I think it was caused by the snow. A Google search on "snow static" brought me to this video (which Gregg in Finland found "shocking""). I liked the tuner and the neon bulbs too.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

My New Shack Heating System: Heath, Halli, Hammarlund and Drake

Temperatures dropped over the weekend and I had to fire up my new heating system for the SolderSmoke shack. See above. Heating by Heath, Halli, Hammarlund and Drake (sounds like a law firm doesn't it?). I'm happy to report that those old filaments take the chill off quite nicely while adding a nice aroma to the room, along with some very pleasing lighting effects (I especially like the green glow from the DX-100 tuning dial).

The Azores-17 DSB JBOT project is (I think) complete. And I did include a low pass filter. In keeping with the finest of ham radio traditions, now that it is cold I will go out and work on an antenna.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Another Treasure Trove: The Royal Society's Archive

I'm a big fan (wanna-be really) of The Royal Society. In SolderSmoke 138 I noted that Isaac Newton (former Society president) seems to have had The Knack. And when I was in London one of the major perks of my job was that I occasionally got to visit the Society's headquarters. Bill Bryson recently edited a book about the Royal Society -- in his intro he noted that they have always been a very international group (just like us!)
Several readers wrote in with the happy news that the Society's 350 year archive has been placed on-line. Here it is:
http://royalsocietypublishing.org/site/authors/free-archive.xhtml

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Homebrew Jet Engine from Junkbox Parts!

Bob, W8SX (our man in Dayton) sent me this nice video. I really liked the friendly and enthusiastic way in which the builder described his project. I only wish he would have fired it up! Thanks Bob!

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Azorean Oscillator Re-build

With my JBOT amp ready for installation, it was time to go back and check out the rest of the circuitry on my old Azorean DSB/Direct Conversion 17 meter "Magic Carpet" transceiver. I was surprised to find that the oscillator, well, wouldn't oscillate. The MPF102 that I had in the main oscillator circuit was blown. I suspect voltage spikes from the T/R relay. I installed the required diode across the relay coil. (I seem to blow up a lot of MPF102s. Is it just me, or are these devices really fragile? They are junction FETs, not MOSFETS, so I thought of them as being more robust. But I seem to go through a lot of them.)

After messing around with the oscillator and buffer circuits, the nice clean Manhattan isolation pads that had been there at the start were all messed up, with big piles of solder with the ends of multiple axial leads stuck in there. I decided to start afresh. Out came the little PCB box that housed that housed the oscillator, buffer and amp stages. Off came the walls of the box. (When I built this thing the first time, I didn't realize that I would need an amp to get to the 7 dbm needed to drive the diode ring. I ran out of room on the main board and ended up building the needed amplifier on the back wall of the box!)

So I got to build this little circuit again, ten years and three countries after the original build. It was fun. I like building oscillators. There is that satisfying sense of closure and completion when, at the end of the effort, you turn on your receiver and hear the tone from your creation.

There was also a fun little bit of troubleshooting. After rebuilding the oscillator circuit I noticed that applying power to the "on the wall" amplifier caused the oscillator to shut down. At the buffer, I was seeing RF in and RF out, but the whole thing would shut down when I powered up the next stage. Obviously there wasn't a lot of BUFFERING going on! Sure enough, the MPF102 was bad. I replaced it from my dwindling supply, and all was right with the universe.

Now the amp goes in. But first I will build the low pass filter. I promise.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20