Polyvaricon Reduction Drive

Oh man, we need more of these.  Many more.  Unfortunately, this may be the only one.   I pulled this out of an old piece of mystery-gear given to me back in 1994 by my friend Pericles HI8P.   Look at that:  dual turning rates, solid construction, and very small.   This device seems destined to go into my W4OP-built Barebones Superhet (in the background).

Farhan's Cool BITX 40 (video)

I especially like the wood base and the transparent front panel.  But we have to send Farhan a D-104!

Check out the video of this rig in action:

https://www.facebook.com/ashhar.farhan/videos/10153914094442107/

Farhan posted:

The BITX40 has a redesigned crystal filter at 12 MHz that contributes to a very clear signal. Note the clarity on SSB and the absence of noise due to the three poles of filtering. This was charminar net on May 2, 2016. I couldn't break-in. Probably because the tiny plug mounted mic was too far away from my mouth.

Un-modifying an S-38 in 1966, and the Urge to Build

Michael mentioned this article in the Comments section under yesterday's post.  March 1966 issue of 73 magazine.  Page 26.  Just click on the images for easier reading.   Or you can find the article here:

http://archive.org/stream/73-magazine-1966-03/03_March_1966#page/n27/mode/1up

More S38 wisdom from 73 here:

http://archive.org/stream/73-magazine-1976-11/11_November_1976#page/n89/mode/1up

That's the November 1976 issue, page 88.

I miss "73".

Hallicrafters S38-E Saved! it is not a "Pig with Lipstick." It Sounds Good! (Video) (And Radio Moscow recordings)

You guys know how it is:  You get tired of struggling with an old piece of gear.  You put it aside, thinking that you might never work on it again.  But it sits there in the corner, sort of looking at you.  A few days or weeks or years pass and you think, hey, I'll take one more quick look at this thing to see if I can get it going.

That's what happened to me this weekend with the Hallicrafters S38-E.  I hooked up the isolation transformer and put a fuse in the primary. I checked the wiring of my rewound antenna coil primary and found that I had connected it wrong.  Duh.   I then found that the antenna tuned circuit tracks fairly well with the tuned circuits in the local oscillator. 

I hooked it up to my 40 meter dipole and fired it up.  As evening rolled around the shortwave bands started to perk up.  The Chinese Broadcast stations were there, as was that fire and brimstone preacher Brother so-and-so.   But then I tuned into Radio Havana Cuba and the guy was talking about homebrew shortwave antennas.  Could it be?  Yes indeed.  It was Arnie Coro CO2KK.  The Radio Gods had spoken!  They clearly had wanted me to get this old rig going.

I still have a few things to do:  I need to fix the front panel light.   I want to put in a three-wire (with ground) AC cord.   Perhaps a real BFO (the original circuit seems to run out of steam with strong SSB signals).  And I need to spruce up the alignment on the 1.7-5 Mc and 13-30 Mc bands.

I think Pete and I may have been too harsh on this old receiver (calling it a pig with lipstick and all that).   It is clearly not a great communications receiver, but it is nice for casual shortwave listening. 

And here is a bonus treat for you guys: Remember Radio Moscow in the bad old days?  Yesterday I found a site with good recordings of some of their 1965 broadcasts.  This is  just what you would have heard coming out of an S38-E in 1965:

http://www.wnyc.org/shows/radio-moscow/listen/ 

1625 Tubes and Si5351 Chips: JH8SST's FB Rig

Peter has been helping Jun JH8SST and other Japanese hams get their Si5351 synthesizers working with various displays.   Jun has had some great success as you can see in the above video.  I really like the combination of old (1625) and new (Si5351) technology.

Jun is a long-time homebrewer who as built some amazing stuff.  Check out the pictures on his QRZ.com page:

http://qrz.com/db/JH8SST

And look at his cool 128x128 TFT display:

Other videos here:

https://www.youtube.com/channel/UCcY94imiTswpjPcfcUIbNcg

KC9KEP's Superhet Receiver with HOMEBREW 455 kc IF Transformers

No store-bought 455 kc IF cans for Big Nick!  FB OM.  Great stuff.

We have featured Big Nick's beautiful work twice before:

http://soldersmoke.blogspot.com/search?q=kc9kep

More of his videos here:

https://www.youtube.com/user/KC9KEP/videos

Be sure to check out his coil winder.

Reduction Redux: Searching for Some Smooth Spin

OK, here is yet another picture of my Mighty Midget's Mate receiver, this time with yet another main tuning dial. I gave up on the large reduction drive on the right -- it worked fine but was very stiff.  I cracked open a smaller version of this very common Japanese-made reduction drive, but in this smaller one I was kind of surprised to find  a Jackson Brothers drive in there.   I now had three of these beauties available -- all of them worked fine but with considerable difference in ease of turning.  I picked the one that was easiest to turn.  

I had to cut the main shaft of the beautiful Hammarlund 35 pf variable cap that I am using. This was dangerous, because of the risk of messing up the delicate bearings.   I stayed out of trouble by putting the tip of the shaft in a vise and then cutting the shaft with a small coping saw.  This prevented any force from being transferred to the bearings.  It worked. 

I was careful to try to line up the shaft and the reduction drive as closely as I could. 

I needed something to serve as the tuning indicator.  I used one of those small CDs that often carry the drivers for cheap electronic devices.  It fit nicely.  A standard sized CD was too big. 

The final element was the knob itself.  I had an old Drake 2-B knob in my junk box (who sent me that?).  It was perfect and added a nice touch of soul to this old-new machine.

I built this receiver in 1998 and when I finished it I thought it was pretty good.  But it is much better now.  It has a nice 455 kc Toyo Crystal-Mechanical filter.  The tuning ranges on 40 and 75 now line up perfectly with the phone bands.  It now has a fuse in the power supply. And the tuning is now SMOOTH.