Cicadas Arrive in Northern Virginia

Usually the only bugs we talk about here are dead bugs (components with their leads up on circuit boards) or perhaps CW keying devices.  But in the last podcast I mentioned  the arrival in Northern Virginia of Brood X Cicadas.  They are coming to the surface after 17 years underground.  This morning I found this amazing animation that explains the lifecycle of these fascinating creatures. 

This morning Elisa mercifully took the time to take several dozen of them off the tires of her car.  

Here is the animation.  Just scroll down to follow the life cycle. 

Be sure to turn on the audio!  

https://www.washingtonpost.com/science/interactive/2021/cicadas-lifecycle-brood-x/?fbclid=IwAR39n951RzQfNPvr3iurHjCDcnDEj2ues0c1UmJFiYV8k5vwO2NZoekKN18

The SST QRP Transceiver

 

Click on the schematic for a better view

Bob KD4EBM recently sent me an amazing package of radio goodies.  Included was a little metal box not much larger than a deck of cards.  It is a 20 meter SST transceiver designed by Wayne Burdick N6KR during the late 1990s.  This transceiver is built around three NE602 Gilbert Cell mixer chips.  It arrived in my shack as I was struggling to understand the Gilbert Cell.  TRGHS.  It also put me back on the path of QRP CW righteousness.    Thanks Bob.  Thanks Wayne. 

I e-mailed Wayne Burdick (now of Elecraft fame) to tell him I was now using the rig he had designed so long ago.  Wayne e-mailed back, saying that the SST was the smallest "real" radio that he had ever designed.  SST stands for Simple Superhet Transceiver. 

I've been using the SST every day for the last week or so.  It is a pleasure to operate.  I'm using it with the key from India that Farhan brought for me.   It is truly QSK -- the receiver stays on when I transmit.  I've never used a QSK rig before and I can now see the big advantage that this provides:   When I am responding to a CQ, I can immediately hear if the other guy put out another CQ or respond to someone else -- I can stop calling at that point.  My first contact with it was with F6EJN.  Again, TRGHS. 

I made two small mods to the SST:  I added 1 uH to the RFC in the VXO; it  now tunes 14.053 -- 14.063.   And I took out a noise blanker that had been installed. Removing the noise blanker left an ugly hole in the front panel which I promptly filled with a completely cosmetic machine screw. 

Here's the manual:

https://qrpbuilder.com/wp-content/uploads/2017/04/sst_manual_042217.pdf

HRDX Interviews Paul Taylor VK3HN

Wow, Paul Taylor, VK3HN is working on homebrew rig #11.  FB.  

This interview was quite thought-provoking. 

-- I agree with Paul about the importance of not being dogmatic about 

always staying under 5 watts.  It sounds like Paul is having fun with his 

100 watt SOTA project. 

-- It was great  to hear that Leon VK2DOB is still active in ham radio and running a QRP company in VK.  FB.  An article by Leon on CMOS mixers in the summer 1999 issue of SPRAT played a key role in my understanding how switching mixers really work.  I put Leon's diagram in my book SolderSmoke -- Global Adventures in Wireless Electronics. 

-- On blowing up the finals in simple HB gear.  The first real transmitter that I built was the VXO-controlled 6 watter from QRP Classics by the ARRL.  It had a 36 volt Zener diode across the collectors of the final.  This was to prevent the kind of final destruction Paul suffered up on that summit:  "D2 is used to clamp the collector voltage waveform to protect the output transistors if the transmitter is operated into an open circuit or high SWR antenna system."  Maybe we should revive the use of that simple SWR protection circuit, especially for SOTA rigs. 

Bill N2CQR Talks to Dean KK4DAS about the Simple SSB Group Build

Dean KK4DAS visited the N2CQR SolderSmoke shack.  We talked about a lot things including chess, Mars, and AI.  Dean is an amazing guy -- he used to work at NASA's Jet Propulsion Laboratory and a couple of times  actually spoke with Richard Feynman. We also shot a video about the Vienna Wireless Society's group build of Pete Juliano's Simple SSB transceiver (video above).  

This group build all started with Dean's build of Pete's rig.  He built his early in the pandemic, while on furlough from work,  thus the name "The Furlough 40." That makes all of this very much a quarantine effort. As we have learned, dark clouds often do have silver linings. 

For more details on the group build, check out Dean's blog:
https://kk4das.blogspot.com/

And here is the Vienna Wireless Society's Group Build page: 

https://drive.google.com/drive/folders/1cQMGPfG1aAZyksIa9fIkS90TjX2_TMuv

Thanks Dean!  And three cheers for all the Vienna Wireless builders!

SolderSmoke Podcast #230 is available! Apr 1, Mars, Group Build, SDR, SSB, Mich Mighty Mites, Mailbag

SolderSmoke Podcast #230 is available for download

http://soldersmoke.com/soldersmoke230.mp3

N2CQR was down for maintenance 

A few words about April 1

The Ingenuity helicopter

China lands on Mars

Brood X Cicadas arriving in NOVA 

Pete's Bench

The Dentron Project

The Spillsbury Tindall SBX-11A

KK4DAS and the Simple SSB Group Build

TenTec mods

Shack Mystery solved.  Maybe 

Changing the channels at age 9 

Bill's Bench

Why LSB below 10 MHz? The "SSB Legend" Rig

WU2D RTL-Dongle Up converter

Understanding the Gilbert (Jones) Cell

SDRSmart  RTL-SDR.com V3 Dongle 

VK3HN and 2 meter SSB

Jack NG2E, MMM and the 10 minute transmitter

KD4EBM sends me SST by Wayne Burdick. DX!  

A new computer 

Mailbag: 

MM0ACN

VK2EMU

N5VZH

VE3KZJ

HS0ZLQ

AD0JJ

VK8MC

KK0S

VE3VVH

KB3SII

WA9WFA

M0NTV

W2DAB

 60 Minutes Story on Mars Ingenuity Helicopter: 

https://www.cbsnews.com/news/nasa-drone-mars-60-minutes-2021-05-09/

The Homebrew Spirit of the Radio Amateur

I just liked this picture.  It seems to capture the pride and satisfaction that comes from getting on the air with homebrew gear. It's obviously a simple QRP station, but it is all homebrew.  And -- from the QSL cards on the wall -- we can see that he has had some success with it.  The map on the wall is of the United States and the QSLs are from the east coast and the mid-west, so my guess is that he's probably on 80 or 40.   FB OM.  

The Joy of Fixing Broken Things (a really amazing video)

This amazing 10 minute video captures very well the joy of fixing broken things. It comes to us through a recommendation from Paul VK3HN in Melbourne, Australia. Thanks Paul.

I hope we will see more from Van Neistat.  He already has a bunch of videos on his YouTube channel:   https://www.youtube.com/channel/UC5mPJA4y5G8Z6aNkY6AxgAw

I often tell the story of the OT (probably now an SK) who at hamfests would ask if a piece of old gear was working. If the vendor answered honestly and said no, OT would reply, "Good, I pay extra for that."  He too liked to fix things.