Podcasting since 2005! Listen to Latest SolderSmoke

Showing posts sorted by date for query Trivial Electric Motor. Sort by relevance Show all posts
Showing posts sorted by date for query Trivial Electric Motor. Sort by relevance Show all posts

Thursday, November 23, 2023

Other Workshops: A Twin Cylinder Solenoid Electric Motor and some Very Cool Craftsmanship


This project caught my eye for a couple of reasons:  

First, it is the product of a very cool metal shop and a very skilled craftsman.  It is fun and inspiring just to watch Maceij build this motor.  We see great precision in the metal cuts, speedy tap and die work, and some great PC board technique.  The use of an open flame on the heat shrink material was, well a bit courageous. 

Second, this is a far more sophisticated version of the trivial electric motor that my son Billy and I built 17 years ago (I still have it!), following up on inspiration from Alan Yates VK2ZAY (see below).   With Alan's device we turned on power to the commutator by just sanding away the insulation on one side of the enameled wiring.  Maceij takes a much more sophisticated approach, with carefully milled switches and opto controllers turning on and off power at the right time to each of the solenoids.    

 

Maceij's YouTube channel has many other projects, many like this one:  https://www.youtube.com/@maciejnowakprojects 

Thanks to HackaDay for the heads up. 

Saturday, November 26, 2022

Another Trivial Electric Motor


The above video popped up on the BBC channel a few days ago.  Three cheers for the Beeb for doing this, but I'd like to point out that we have been building Trivial Electric Motors for at least 16 years.  We were inspired by Alan Yates VK2ZAY W7ZAY. 

 Below is a video from 2006: 


And there are several links (and a video) about Alan and the Trivial Electric Motor here: 


Thanks again Alan! 

Thursday, June 16, 2022

Watch Mr. Wizard! 1952 Program on Electromagnetism. And more! (video)


Wow.  This is a very thought provoking program.  It is kind of like "Mr. Roger's Neighborhood," but with science. The lessons provided by Mr. Wizard are really good, but one shudders to think about doing the these experiments with kids (or even with adults!) in today's world.  Here are a few of things that would cause trouble today:  

-- Liquid mercury.  
-- A big power supply. ("Here Willy, you hold the positive terminal.") 
-- Even the sprinkling of iron filings would probably require masks at a minimum.  
-- In the end, letting poor Willy drop to the floor when Betsy turns off the electromagnet that was holding his swing in the air.  
-- And of course, poor old Mr. Wizard's affinity for the kids would stir suspicions. 

We also see a sad and very early example of the influence of advertisers and what they call today "product placement."  Note the fairly obvious plug (via Morse Code!) for breakfast cereal.  In the credits you will see that the program was sponsored by "The Cereal Institute."  What next kids?  Cigarettes? 

But there is a lot of virtue in this program:  The development of the telegraph key, Morse Code,  CW sidetone.  Unlike many of the Box Top Extras of today, young Betsy was not afraid to wind a coil.   

We should all embrace the spirit of Mr. Wizard.  We are, after all, the International Brotherhood of Electronic WIZARDS!  These experiments reminded me a lot of the Trivial Electric Motor that my son Billy and I made when he was around Willy's age (thanks for the idea Alan Yates).  

Thanks to Chuck KF8TI for alerting us to this show.  Chuck says this program was an early influence on him, and was one of the things that provided a connection between the theory he was learning in college and the real world of electronic devices. 

Many more great programs like this can be found on Mr. Wizard's YouTube Channel: 
https://www.youtube.com/user/MrWizardStudios   Please let us know if you find other videos (on this channel or elsewhere)  that will be of special interest to the IBEW. 

Finally, color TV in 1952?  That seems a bit early for color.  What do you folks think was happening here? 

Saturday, May 9, 2020

Bill Meara Graduates with Honors from James Madison University

Deep thoughts where Faraday lectured
He has been part of the podcast and blog since the beginning: Camera kites, video rockets and crystal radios.  Drones and exploding corn starch.  The Trivial Electric Motor.  Visits to Faraday's lab and Marconi's house.  Billy helped me wind toroids at age 2!. He went with me to hamfests in Virginia and in London. 


Toroid by Billy (at age 2)

Here are just some of the blog posts in which Billy is a key player: https://soldersmoke.blogspot.com/search?q=Billy


This video demonstrates Billy's early interest in biotechnology: 


And of course, he is the guy who says "Ooo!  That's awesome" in all of the podcasts. 
Yesterday was a big day: We are very proud of our son Bill Meara who graduated with honors yesterday from James Madison University. Bill earned his Bachelor of Science degree in Biotechnology. In a few weeks he will be heading to Boston where he will start work at a neuroscience research lab of Harvard University.


2020 Virtual Graduation



Billy's mom, sister and dad watching the graduation 
Graduation:  Oooo! That's Awesome! 




Saturday, December 15, 2018

SolderSmoke Podcast #208


SolderSmoke Podcast #208 is available: 

http://soldersmoke.com/soldersmoke208.mp3

15 December 2018

Pete and the California fires
Bill goes to Brooklyn
2 meter simplex
A return of the trivial electric motor
Audio from Mars
HF Conditions -- a real mixed bag

Pete looks back at 2018 -- The Year of the SSB Transceiver -- Lessons Learned

Hans Summers, the QSX and the virtues of SDR
W7ZOI's DC Receiver Retrospective
The 1972 Solar Flare and the Vietnam War

SHAMELESS COMMERCE:  Buy your gifts through the Amazon link to the upper right. 
Consider SolderSmoke the book as a gift.  Visit Pasta Pete's for cooking ideas. 

Don't Build It!   Sage -- but unexpected -- advice from Pete. 

Straight Key Night approaches. 

Book Reviews:  
--"What is Real?"  (Quantum Physics)
-- RHdb by K6LHA.

Movies
"Bohemian Rhapsody" 
"First Man" (Not yet!)

MAILBAG: 
Steve G0FUW
Ed KC8SBV 






Sunday, August 27, 2017

Knack Victim Makes Good! Alan Yates in Seattle



Jean Shepherd used to say that in life, many of us come to a fork in the road:  down one path lies success.  Down the other, ham radio flea markets.  Alan Yates is proving Shep to be WRONG. 

I have fond memories of Billy and I building many versions of Alan's trivial electric motor.   We look forward to his virtual reality.  

Wednesday, December 14, 2011

Have An Oz Knack Christmas with VK2ZAY!

This is not the most flattering picture of our friend Alan, VK2ZAY, but I find myself forced to use it (again!) because of the Christmas light head-gear. Sorry OM.

I was thinking about Alan just the other day as I contemplated my broken Lafayette power supply (scroll down to the test gear article). You see, the meter in that little supply was destroyed by a trivial electric motor that Billy and I built a long time ago after a visit to Alan's amazing site. Don't worry Alan -- the broken meter is not your fault.

Once again proving that he is a true Knack victim and a certified member of the International Brotherhood of Electronic Wizards, Alan is doing an "Advent Calendar" of YouTube tech videos -- one short video each day during the Christmas season. I looked at a couple of them this morning. You guys will love them. Alan obviously has a deep understanding of the circuitry and a great talent for explaining how his creations work.
Thanks a lot Alan! Here is the link:

http://www.youtube.com/user/vk2zay

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Saturday, December 10, 2011

Test Gear/Workbench Maintenance

I mentioned in the last podcast that I was going to take a break from construction projects and spend a little time fixing up tools, test gear, and the work bench. First up was my old soldering gun. I bought this thing almost 40 years ago! It is pretty beat up, but I managed to patch it up and it now works fine. Even the original light bulb works.

I use this little AADE L/C meter a lot, but was having trouble getting parts across the test terminals. So I soldered alligator clips onto one of the parts connectors that came with the device. Makes testing easier.

Just a little audio oscillator. Puts out .2 volts at 713 Hz. Useful for testing the phone rigs.

I picked up this little Lafayette power supply at a hamfest and found it quite useful. But then I managed to knock the needle off the meter while fooling around with trivial electric motor. Any ideas on where I could get a replacement meter movement, or on what value I should use?

Here is a wave meter that I picked up at the Kemptom Park rally in London. Apparently at one point all UK radio amateurs were required to have one of these devices. I'm tempted to chop it up for parts. That variable cap with the reduction drive looks promising. And could that meter solve my problem with the power supply (above). If anyone can think of a reason to keep this as a wavemeter, please let me know.

Further proof of my extreme retro-ness. This is what I use as a signal generator. A Heathkit SG-6. Older than me!

This is my scope. HAMEG. Supposed to be good to 10 MHz but of course I can use it at higher freqs (which I do). I need to upgrade. Any suggestions?

A very useful little square wave generator.

I need to make more use of this noise bridge. Lots of potential here.

Obviously a London purchase. Very useful little AF sig generator from the UK's equivalent of Radio Shack. My only complaint: No auto-off. I forget to turn it off and run down the two 9 V batteries.

Long time listeners will remember this device. This is the one in which I soldered in the chip upside down. It works fine on th 5 Hz to 100 MHz range. Dead on the 4 - 600 MHz position.

I bought this power supply at the Kempton Rally, then converted it into a current limited supply using a chip and a circuit provided by Tony, G4WIF. My daughter Maria helped paint the cabinet. Lots of soul in this little machine.

Just three meters. The middle (analog one) is still very useful, and has considerable sentimental value for me -- my wife got if for me when we were back in the Dominican Republic.
My version of the W7ZOI power meter. Mike, KL7R, and I built versions of this device back in 2004 or so.
This is Cappuccio. He joins me in the shack most mornings. I'm not really a dog person, but I'm growing fond of him, even though he occasionally eats resistors and capacitors.

Our book: "SolderSmoke -- Global Adventures in Wireless Electronics"http://soldersmoke.com/book.htmOur coffee mugs, T-Shirts, bumper stickers: http://www.cafepress.com/SolderSmokeOur Book Store: http://astore.amazon.com/contracross-20

Sunday, June 6, 2010

The Amateur Scientist, Trivial Motors, Influential Books...


I got a nice e-mail from Keith, VE3TZF, that got me thinking about "The Amateur Scientist" by C.L. Strong. The Wiki article on this book is very interesting:
http://en.wikipedia.org/wiki/The_Amateur_Scientist
Check out the part about Forrest Mims.

Here's Keith's e-mail:

----
Hello again Bill,

In your podcast you frequently make reference to the book, The Amateur Scientist.

This got me thinking back to what REALLY got me started along the path of building stuff for fun.

There were three books I remember reading over and over, even though at the time I had a very hard time really understanding what was on all of those pages. Those books were:

1. 'Codes, Ciphers, and Secret Writing', by Martin Gardner (unfortunately, he recently passed away).
2. Some type of 'build yourself a science laboratory' book.
3. Some type of 'build electric motors' book.

I explicitly remember that one of the tasks in the 'science laboratory' book was to take a burnt out light bulb, etch around the neck, break it off, and turn it into a flask. The flask was supposed to sit on a stand that you already made out of wire (a coat hanger?). I've been trying all sorts keyword searches in Google to fine the name of the book. I'm sure I would recognize it if I saw it. Is this 'The Amateur Scientist'? The closest I have gotten is "Build-it-yourself science laboratory: work like a scientist: build your own equipment, make real findings" by the Oregon Museum of Science and Industry. I'm still looking...

On the other hand, when you described the trivial electric motor, something twigged in my memory. I've built one of those! Many of those in fact! Decades ago! The 'electric motor' book made reference to 3 basic designs. They were called the 'mini', the 'midi', and the 'maxi'. The 'mini' motor was in fact the trivial electric motor. The 'midi' motor used fixed magnets on the armature, and the 'maxi' motor used electromagnets only. I remember salvaging an old wooden pencil box, and stealing some of my mom's knitting needles, to build the 'maxi' motor. I used a 6 volt lantern battery to power it. It worked extremely well, but got incredibly hot! And the sparks! I had not yet learned about volts, amps, and watts. Also at the time I was too young to get the mini/midi/maxi references to womens' skirts.

After a little searching with Google, I hit the jackpot:

* "How to make and use electric motors", Al G. Renner - 1974
* Text and diagrams give instructions for building the mini, midi, and maxi motors and for performing various experiments.

Now I just have to find a copy.

I'm currently spending a lot of time with my nephew, building blinking LED circuits, buzzers, motors, and listening to Morse code. He's really getting into it, and I KNOW that this is important.

I just wanted you to know that your podcast (and excellent book) have far reaching impacts that you may have never intended.

-Keith Robert Murray VE3 TZF

Wednesday, March 4, 2009

ET Phone Home! With Minimalist QRSS!

I knew that Alan Yates, VK2ZAY, was just the man for this project. Alan and I met up several years ago when Billy and I spotted and built his Trivial Electric Motor (we still have it, and occasionally fire it up to amaze visitors). On SolderSmoke 102 I mentioned the possibility of a one transistor QRSS transmit station. Obviously this would require some sort of mechanical keyer. I thought of a clock drive. Alan pointed out the in the 1982 Steven Spielberg movie, ET had used a saw blade as his mechanical modulator (see above). Alan also had some intriguing ideas of his own:

G'day Bill,
Thanks again for noticing my QRSS signal making it through to Europe.

Your talk about mechanical solutions for QRSS modulators immediately

made me recall "E.T. the Extra-Terrestrial". The "Phone Home" device he
built had a modulator based on a sawblade IIRC - its been years since I
watched that 1982 classic.

One easy hack might be to use an AC synchronous motor out of a gobo
rotator (for example, I got one out of a fibre optic christmas tree that
expired from overheating). Its reduction drive results in a fairly slow
rotation which might drive a modulator plate. You could do the pickup
optically using a LED/photodiode (or transistor, or even an LDR I guess)
transmission pair. Electrical contacts would work too, but doing it
optically probably means it would have a longer life.

A tape loop system might also be practical and would allow long
modulations to be encoded at reasonable tape rates. A syncro-drive gobo
has to be turned fairly slowly and pushes the "density" of the data
fairly high so the mechanical or optical sensor gets harder to just
throw together. I am sure a clockwork driven disk could be made to
work, it just might have to be fairly large.

Mechanical readout might be a microswitch and holes in the plate, or
even using PCB material with the pattern on it (etched or masked), and a
brush contact. To minimise wear a brass small roller held against disk
with spring tension would work. Oxidation on aging might become a
problem - yeah the more I think about it I am liking optical better.

You can also do it electrically using a diode matrix which can be read
out with some counters. Of course that defeats the original purpose
which was to make a single transistor QRSS beacon with a mechanical
modulator.

One completely insane idea that just occurred to me is to build a slow
mechanical oscillator (say driven by a Stirling Engine or a Curie Point
Pendulum heated by a small candle) and modulate the RF oscillator with
that. The mechanics or thermal system might directly effect the RF
oscillator frequency. Who will make the first candle-powered QRSS
beacon with thermopile PSU? :-)

Regards,
Alan
http://www.vk2zay.net/

Tuesday, May 6, 2008

Alan Yates: Electronics Wizard!

I first met up with Alan in 2002 when I spotted his web site describing a "Trivial Electric Motor."
My son Billy and I built one and sent Alan a report.

Alan clearly has "The Knack." Check out his site: http://www.vk2zay.net/category.php/13
Designer: Douglas Bowman | Dimodifikasi oleh Abdul Munir Original Posting Rounders 3 Column